Eric Lee / smarc-uboot

29 Feb, 2020

1 commit

23 Jan, 2020

1 commit

05 Dec, 2019

2 commits

04 Dec, 2019

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

13 Nov, 2019

1 commit

23 Sep, 2019

1 commit

26 Aug, 2019

2 commits

  • c680df7e8   mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig ... Browse Code »

    Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs,
    headers and whitelist.

    Please note that this symbol already was used in Kconfig
    (imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was
    not available in Kconfig. This changes now with this patch and all
    boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what
    I also need on my GARDENA AT91SAM based board.

    Signed-off-by: Stefan Roese
    Cc: Eugen Hristev
    Cc: Miquel Raynal
    Cc: Gregory CLEMENT
    [trini: Rework such that the configs are unchanged to start with]
    Signed-off-by: Tom Rini

    Stefan Roese
     
  • 1bf330150   Convert CONFIG_ARCH_CPU_INIT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_ARCH_CPU_INIT

    Signed-off-by: Adam Ford
    Acked-by: Chris Packham
    Tested-by: Felix Brack

    Adam Ford
     

23 May, 2019

1 commit

  • 1cee54ebf   configs: sama5d2_ptc_ek: fix NAND PMECC_CAP ... Browse Code »

    CONFIG_PMECC_CAP has a higher priority than its ONFI detected
    parameter and will overwrite it when defined. As per commit
    49ad40298cc5, CONFIG_PMECC_CAP has a default value of 2 if not
    otherwise stated. This results in the overwriting of the ONFI ECC
    bits value. The following errors are seen when booting the kernel
    from the nand flash:

    Loading Environment from NAND... PMECC: Too many errors
    NAND read from offset 140000 failed -74
    *** Warning - some problems detected reading environment; recovered successfully
    *** Warning - bad CRC, using default environment

    In: serial
    Out: serial
    Err: serial
    Net: eth0: ethernet@f8008000
    Hit any key to stop autoboot: 0

    NAND read: device 0 offset 0x180000, size 0x80000
    PMECC: Too many errors
    NAND read from offset 180000 failed -74
    0 bytes read: ERROR

    NAND read: device 0 offset 0x200000, size 0x600000
    PMECC: Too many errors
    NAND read from offset 200000 failed -74
    0 bytes read: ERROR
    Bad Linux ARM zImage magic!

    Fix it by setting the right value for ECC bits.

    Fixes: 49ad40298cc5 ("ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig")
    Signed-off-by: Tudor Ambarus

    Tudor Ambarus
     

30 Apr, 2019

1 commit

21 Jan, 2019

1 commit

  • 49ad40298   ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig ... Browse Code »
    25

    This commit converts the following items to Kconfig:

    CONFIG_ATMEL_NAND_HWECC
    CONFIG_ATMEL_NAND_HW_PMECC
    CONFIG_PMECC_CAP
    CONFIG_PMECC_SECTOR_SIZE
    CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER

    [PMECC References]
    https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigure
    https://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap

    [Mailing List Thread]
    https://lists.denx.de/pipermail/u-boot/2018-December/350666.html

    Fixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment")
    [trini: Make the migration be size neutral and possibly not fix the
    above in all cases]
    Reported-by: Daniel Evans
    Cc: Eugen Hristev
    Signed-off-by: Derald D. Woods
    Signed-off-by: Tom Rini

    Derald D. Woods
     

22 Oct, 2018

2 commits

29 Sep, 2018

2 commits

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

22 Jul, 2018

2 commits

04 Jun, 2018

1 commit

08 May, 2018

1 commit

17 Apr, 2018

1 commit

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

30 Nov, 2017

1 commit