30 Mar, 2008
5 commits
-
Add 82541ER device with latest integrated IGP2 PHY.
Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.Signed-off-by: Andre Schwarz
Signed-off-by: Ben Warren -
GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
a debug link (EDCL). The GRETH core is documented in GRIP.pdf
available at www.gaisler.com.If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
offloading etc.) can be determined by a bit in the control register.
The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.Signed-off-by: Daniel Hellstrom
Signed-off-by: Ben Warren -
Provide common configuration in do_mii() to execute mii_init()
for all cpu architecturesSigned-off-by: TsiChung Liew
Signed-off-by: Ben Warren -
Signed-off-by: TsiChung Liew
Signed-off-by: Ben Warren -
Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
delay before sending "DHCP Request" in net/bootp.c. Required to overcome
interoperability problems with Windows Server 200x DHCP server when U-Boot
client responds too fast for server to handle.Signed-off-by: Aras Vaichas
Signed-off-by: Ben Warren
28 Mar, 2008
1 commit
-
Revert commit 87c8431f and fix build breakage so that the build continues
to work on FC systems.Signed-off-by: Bartlomiej Sieka
27 Mar, 2008
33 commits
-
Signed-off-by: Haavard Skinnemoen
-
Currently U-Boot building in some external directory
doesn't work. This patch tries to fix the problem.Signed-off-by: Anatolij Gustschin
-
Fix typo in README
Signed-off-by: Anatolij Gustschin
-
This patch fixes compilation error
cmd_usb.c: In function 'do_usb':
cmd_usb.c:552: error: void value not ignored as it ought to beSigned-off-by: Anatolij Gustschin
-
Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
but fsl_i2c.c ignores it and uses conservative value when programming the
I2C bus speed.Signed-off-by: Timur Tabi
Acked-by: Andy Fleming -
Signed-off-by: Wolfgang Denk
-
Add the Freescale on-chip SATA controller driver to u-boot,
The SATA controller is used on the 837x and 8315 targets,
The driver can be used to load kernel, fs and dtb.The features list:
- 1.5/3 Gbps link speed
- LBA48, LBA28 support
- DMA and FPDMA support
- Two ports supportSigned-off-by: Dave Liu
-
Signed-off-by: Dave Liu
-
Signed-off-by: Dave Liu
-
Signed-off-by: Dave Liu
-
add simple libata support in u-boot
Signed-off-by: Dave Liu
-
original ata_piix driver is using IDE framework, not real
SATA framework. For now, the ata_piix driver is only used
by x86 sc520_cdp board. This patch makes the ata_piix driver
use the new SATA framework, so- remove the duplicated command stuff
- remove the CONFIG_CMD_IDE define in the sc520_cdp.h
- add the CONFIG_CMD_SATA define to sc520_cdp.hSigned-off-by: Dave Liu
-
- add the SATA framework
- add the SATA command lineSigned-off-by: Dave Liu
-
move the sata.h from include/ to drivers/block/ata_piix.h
Signed-off-by: Dave Liu
-
move the cmd_sata.c from common/ to drivers/ata_piix.c,
the cmd_sata.c have some part of ata_piix controller drivers.
consolidate the driver to have better framework.Signed-off-by: Dave Liu
-
f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
to only print only information on one storage device, but not for
multiple.Signed-off-by: Markus Klotzbuecher
-
This patch fixes compilation error
cmd_usb.c: In function 'do_usb':
cmd_usb.c:552: error: void value not ignored as it ought to beSigned-off-by: Anatolij Gustschin
Signed-off-by: Markus Klotzbuecher -
Provide a board_lmb_reserve helper function to ensure we reserve
the page of memory we are using for the boot page translation code.Signed-off-by: Kumar Gala
-
The following changes are needed to be inline with ePAPR v0.81:
* r4, r5 and now always set to 0 on boot release
* r7 is used to pass the size of the initial map area (IMA)
* EPAPR_MAGIC value changed for book-e processors
* changes in the spin table layout
* spin table supports a 64-bit physical release addressSigned-off-by: Kumar Gala
-
Each file that can be built here now follows some
CONFIG_ option so that they are appropriately built
or not, as needed. And CONFIG_ defines were added
to various board config files to make sure that happens.The other board/freescale/*/Makefiles no longer need
to reach up and over into ../common to build their
individually needed files any more.Boards that are CDS specific were renamed with cds_ prefix.
Signed-off-by: Jon Loeliger
-
ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
Signed-off-by: Kumar Gala
-
Signed-off-by: James Yang
Signed-off-by: Jon Loeliger
Signed-off-by: Kumar Gala -
get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
called. However, get_sys_info() recalculates extraneous information when
called each time. Have get_ddr_freq() and get_bus_freq() return memoized
values from global_data instead.Signed-off-by: James Yang
Signed-off-by: Kumar Gala -
Show the DDR memory data rate in addition to the memory clock
frequency. For DDR/DDR2 memories the memory data rate is 2x the
memory clock.Signed-off-by: James Yang
Signed-off-by: Kumar Gala -
Speed up get_tbclk() by referencing pre-computed bus clock
frequency value from global data instead of sys_info_t. Fix
rounding of result to nearest; previously it was rounding
upwards.Signed-off-by: James Yang
Signed-off-by: Kumar Gala -
FSL has taken to using SVR[16:23] as an SOC sub-version field. This
is used to distinguish certain variants within an SOC family. To
account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
constants to reflect the larger value. We also add SVR numbers for all
of the current variants. Finally, to make things neater, rather than
use an enormous switch statement to print out the CPU type, we create
and array of SVR/name pairs (using a macro), and print out the CPU name
that matches the SVR SOC version.Signed-off-by: Andy Fleming
-
Signed-off-by: Andy Fleming
-
Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.Added support for using the ePAPR defined spin-table mechanism on 85xx.
Signed-off-by: Kumar Gala
Signed-off-by: Andy Fleming -
Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.Added support for using the ePAPR defined spin-table mechanism on 85xx.
Signed-off-by: Kumar Gala
-
When we go to 36-bit physical addresses we need to keep the concept of
the physical CCSRBAR address seperate from the virtual one.For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
Signed-off-by: Kumar Gala
26 Mar, 2008
1 commit
-
Signed-off-by: Wolfgang Denk