18 Jan, 2018
1 commit
-
Sata is equipped on ls1012a and can be a boot source. Add sata boot
support as an option if available.Signed-off-by: Tang Yuantian
Reviewed-by: York Sun
09 Jan, 2018
1 commit
-
Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly.
Signed-off-by: Ran Wang
13 Dec, 2017
2 commits
-
This symbol enables some library code used by various SATA drivers,
so make this a non-user-visible symbol select'ed by the respective
drivers, and let moveconfig handle the rest.Signed-off-by: Tuomas Tynkkynen
-
And use 'imply' liberally.
Signed-off-by: Tuomas Tynkkynen
28 Oct, 2017
1 commit
27 Oct, 2017
4 commits
-
Because COMFIG_DM_USB has been enabled and will not use it anymore.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
Reviewed-by: York Sun -
use Kconfig to select xhci accordingly.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
Reviewed-by: York Sun -
Use Kconfig to select QE-HDLC and USB pin-mux.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
Reviewed-by: York Sun -
This macro is defined, but not referenced by anyone.
I did not touch config_whitelist.txt - the CONFIG will be dropped
by the next re-sync.Signed-off-by: Masahiro Yamada
Reviewed-by: York Sun
02 Sep, 2017
1 commit
-
This syncs all of the currently Kconfig'd symbols out of the headers and
into the defconfig files. This has two exceptions, first am335x_evm
needs to be converted to DM in SPL and then it can stop undef'ing
CONFIG_DM_USB. Leaving this as-is results in a build failure, and
without work, run time failure. The other case is am43xx_evm.h and in
turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
host mode in SPL, but still desire to have gadget mode in U-Boot proper.Signed-off-by: Tom Rini
12 Aug, 2017
2 commits
-
This converts the following to Kconfig:
CONFIG_CMD_SCSIAlso update the Makefile to use CONFIG_CMD_SCSI instead of CONFIG_SCSI to
enable the command, fixing an earlier error.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
[trini: Rework to default y if SCSI, drop cl-som-am57x which did not use
CMD_SCSI for real]
Signed-off-by: Tom Rini -
This converts the following to Kconfig:
CONFIG_CMD_PCISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
10 Aug, 2017
1 commit
-
Signed-off-by: Rajat Srivastava
Signed-off-by: Rajesh Bhagat
Signed-off-by: yinbo.zhu
[YS: Revise subject, remove commit message]
Reviewed-by: York Sun
29 Jul, 2017
1 commit
-
Now that xHCD does not use CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS,
remove it in all boards' config files.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass
Reviewed-by: Stefan Roese
Tested-by: Stefan Roese
12 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_SCSISigned-off-by: Simon Glass
Reviewed-by: Bin Meng
22 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRINGSigned-off-by: Simon Glass
Reviewed-by: Tom Rini
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini
16 May, 2017
1 commit
-
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig.
For a few SoCs, imply or default y this if USB is enabled. In some
cases we had not already migrated to CONFIG_USB so do that as well.Cc: Marek Vasut
Signed-off-by: Tom Rini
Reviewed-by: Marek Vasut
15 May, 2017
1 commit
-
In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.Cc: Marek Vasut
Signed-off-by: Tom Rini
Reviewed-by: Marek Vasut
01 May, 2017
1 commit
-
Signed-off-by: Chris Packham
[trini: default y if DM_RTC, re-sync]
Signed-off-by: Tom Rini
31 Jan, 2017
1 commit
-
Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.
Let's create an entry for "config GENERIC_MMC" with "default MMC",
then convert all macro defines in headers to Kconfig. Almost all
of the defines will go away.I see only two exceptions:
configs/blanche_defconfig
configs/sandbox_noblk_defconfigThey define CONFIG_GENERIC_MMC, but not CONFIG_MMC. Something
might be wrong with these two boards, so should be checked later.Anyway, this is the output of the moveconfig tool.
This commit was created as follows:
[1] create a config entry in drivers/mmc/Kconfig
[2] tools/moveconfig.py -r HEAD GENERIC_MMC
[3] manual clean-up of garbage comments in doc/README.* and
include/configs/*.hSigned-off-by: Masahiro Yamada
Reviewed-by: Tom Rini
28 Jan, 2017
3 commits
-
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
Signed-off-by: Tom Rini -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
22 Jan, 2017
1 commit
-
Cc: Tom Rini
Signed-off-by: Jagan Teki
19 Jan, 2017
3 commits
-
Enable UUID and GPT partition support for NXP's ARM based SoCs
i.e. LS1012A, LS1021A, LS1043A, LS1046A and LS2080A.Also enable DOS partition for LS1012AFRDM boards.
Signed-off-by: Prabhakar Kushwaha
Reviewed-by: York Sun -
Signed-off-by: Hou Zhiqiang
Reviewed-by: Simon Glass
Reviewed-by: York Sun -
The patch enables PCIe and E1000 in ls1012a defconfigs and
removes unused PCIe related macro definesSigned-off-by: Minghuan Lian
Signed-off-by: Hou Zhiqiang
Reviewed-by: York Sun
30 Dec, 2016
1 commit
-
Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
instances only for SUNXI.We generally do not like such partial moves. This kind of work
is automated by tools/moveconfig.py, so it is pretty easy to
complete this move.I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
This shortens the configs and will ease new board porting.This commit was created as follows:
[1] Edit Kconfig (remove the "depends on", add the "default",
copy the prompt and help message from Linux)[2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'
Signed-off-by: Masahiro Yamada
Reviewed-by: Jaehoon Chung
28 Oct, 2016
2 commits
-
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig
to use that.Signed-off-by: Bin Meng
Reviewed-by: Tom Rini
[trini: Re-generate configs and include/configs/ changes]
Signed-off-by: Tom Rini -
Add 'PCI' as a menu option and migrate all existing users.
Signed-off-by: Tom Rini
Acked-by: Stephen Warren
26 Sep, 2016
1 commit
-
Instead of using multiple macros, a data structure is used to pass
board-specific parameters to MMDC DDR driver.Signed-off-by: York Sun
CC: Shengzhou Liu
Reviewed-by: Tom Rini
15 Sep, 2016
1 commit
-
This general MMDC driver adds basic support for Freescale MMDC
(Multi Mode DDR Controller). Currently MMDC is integrated on ARMv8
LS1012A SoC for DDR3L, there will be a update to this driver to
support more flexible configuration if new features (DDR4, multiple
controllers/chip selections, etc) are implimented in future.Meantime, reuse common MMDC driver for LS1012ARDB/LS1012AQDS/
LS1012AFRDM.Signed-off-by: Shengzhou Liu
Reviewed-by: York Sun
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini
03 Aug, 2016
1 commit
-
qixis_reset altbank usagge ~QIXIS_LBMAP_MASK in code. So define
inverse value QIXIS_LBMAP_MASK.Also, update QIXIS_RST_CTL_RESET value to keep RST_CTL[REQ_MOD]
as 0b11 i.e. PORESET during qixis_resetSigned-off-by: Prabhakar Kushwaha
Reviewed-by: York Sun
07 Jun, 2016
1 commit
-
Modified:
configs/ls1012afrdm_qspi_defconfig
configs/ls1012aqds_qspi_defconfig
configs/ls1012ardb_qspi_defconfig
include/configs/ls1012afrdm.h
include/configs/ls1012aqds.h
include/configs/ls1012ardb.hSigned-off-by: Tom Rini
04 Jun, 2016
1 commit
-
QorIQ LS1012A Development System (LS1012AQDS) is a high-performance
development platform, with a complete debugging environment.
The LS1012AQDS board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.Signed-off-by: Calvin Johnson
Signed-off-by: Pratiyush Mohan Srivastava
Signed-off-by: Abhimanyu Saini
Signed-off-by: Prabhakar Kushwaha
Reviewed-by: York Sun