22 Jan, 2017
2 commits
-
Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.Tested boards: CL-SOM-AM57x, CM-T335
Signed-off-by: Uri Mashiach
-
Move all of the status LED feature to drivers/led/Kconfig.
doc/README.LED updated to reflect the Kconfig implementation.Tested boards: CL-SOM-AM57x, CM-T335
Signed-off-by: Uri Mashiach
20 Jan, 2017
2 commits
-
commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor"
breaks u-boot commandline working with long commands
sending to the board.Since the above patch, you have to setup the fcr register.
For board/archs which enable OF_PLATDATA, the new field
fcr in struct ns16550_platdata is not filled with a
default value ...This leads in not setting up the uarts fifo, which ends
in problems, when you send long commands to u-boots
commandline.Detected this issue with automated tbot tests on am335x
based shc board.The error does not popup, if you type commands. You need
to copy&paste a long command to u-boots commandshell
(or send a long command with tbot)Possible boards/plattforms with problems:
./arch/arm/cpu/arm926ejs/lpc32xx/devices.c
./arch/arm/mach-tegra/board.c
./board/overo/overo.c
./board/quipos/cairo/cairo.c
./board/logicpd/omap3som/omap3logic.c
./board/logicpd/zoom1/zoom1.c
./board/timll/devkit8000/devkit8000.c
./board/lg/sniper/sniper.c
./board/ti/beagle/beagle.c
./drivers/serial/serial_rockchip.cSigned-off-by: Heiko Schocher
Signed-off-by: Ladislav Michl
Tested-by: Adam Ford
Reviewed-by: Tom Rini
19 Jan, 2017
10 commits
-
Move fdt fixup of 'status' property into a weak function. This allows
board to define 'status' fdt fixup by themselves.Signed-off-by: Yangbo Lu
Reviewed-by: York Sun -
This patch adds a simple pmic driver for the mc34vr500 pmic which
is used in conjunction with the fsl T1 and LS1 series SoC.Signed-off-by: Hou Zhiqiang
Reviewed-by: Jaehoon Chung
Reviewed-by: York Sun -
This patch is to add 'fsl,esdhc' into of_match table to support
driver model for QorIQ eSDHC.Signed-off-by: Yangbo Lu
Reviewed-by: York Sun -
There would be compiling error as below when enable driver model for esdhc.
undefined reference to `dm_gpio_get_value'
undefined reference to `gpio_request_by_name_nodev'
This patch is to make GPIO support optional with CONFIG_DM_GPIO. Because
all boards of QorIQ platform don't need it and they just check register for
CD/WP status, only some boards of i.MX platform require this.Signed-off-by: Yangbo Lu
Acked-by: Jaehoon Chung
Reviewed-by: York Sun -
Signed-off-by: Hou Zhiqiang
Reviewed-by: Simon Glass
Reviewed-by: York Sun -
All Layerscape SoCs have supported new PCIe driver based on DM.
The lagecy PCIe driver code is unused and can be removed.Signed-off-by: Minghuan Lian
Signed-off-by: Hou Zhiqiang
Reviewed-by: Simon Glass
Reviewed-by: York Sun -
There are more than five kinds of Layerscape SoCs. unfortunately,
PCIe controller of each SoC is a little bit different. In order
to avoid too many macro definitions, the patch addes a new
implementation of PCIe driver based on DM. PCIe dts node is
used to describe the difference.Signed-off-by: Minghuan Lian
Signed-off-by: Hou Zhiqiang
Reviewed-by: Simon Glass
Reviewed-by: York Sun -
To make the layerscape pcie driver clear, move the kernel DT fixup
code from pcie_layerscape.c to pcie_layerscape_fixup.c.Signed-off-by: Hou Zhiqiang
Reviewed-by: Simon Glass
Reviewed-by: York Sun -
There may be multiple PCIe controllers in a SoC.
It is not correct that always calling pci_bus_to_hose(0) to get
the first PCIe controller for the PCIe device connected other
controllers. We just remove this calling because hose always point
the correct PCIe controller.Signed-off-by: Minghuan Lian
Signed-off-by: Hou Zhiqiang
Reviewed-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: York Sun -
for the legacy PCI driver, the function pci_bus_to_hose() returns
the real PCIe controller. To keep consistency, this function is
changed to return the PCIe controller pointer of the root bus
instead of the current PCIe bus.Signed-off-by: Minghuan Lian
Signed-off-by: Hou Zhiqiang
Reviewed-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: York Sun
18 Jan, 2017
11 commits
-
The generic probe code in dm works, so get rid of the leftover cruft.
Signed-off-by: Moritz Fischer
Cc: Heiko Schocher
Cc: Michal Simek
Cc: u-boot@lists.denx.de -
Revision 1.0 of this IP has a quirk where if during a long read transfer
the transfer_size register will go to 0, the master will send a NACK to
the slave prematurely.
The way to work around this is to reprogram the transfer_size register
mid-transfer when the only the receive fifo is known full, i.e. the I2C
bus is known non-active.
The workaround is based on the implementation in the linux-kernel.Signed-off-by: Moritz Fischer
Cc: Heiko Schocher
Cc: Michal Simek
Cc: u-boot@lists.denx.de -
Reorder the timeout loop such that we first check if the
condition is already true, and then call udelay() so if
the condition is already true, break early.Reviewed-by: Michal Simek
Signed-off-by: Moritz Fischer
Cc: Heiko Schocher
Cc: Michal Simek
Cc: u-boot@lists.denx.de -
Revision 1.0 of this IP has a couple of issues, such as not supporting
repeated start conditions for read transfers.So scan through the list of i2c messages for these conditions
and report an error if they are attempted.This has been fixed for revision 1.4 of the IP, so only report the error
when the IP can really not do it.Signed-off-by: Moritz Fischer
Cc: Heiko Schocher
Cc: Michal Simek
Cc: u-boot@lists.denx.de -
For mux check if the parent is already a device of UCLASS_I2C and if yes
just use that. Otherwise see if someone specified an i2c-parent phandle.
This mimics the behavior found in the Kernel, as it removes the
requirement to explicitly specify a i2c-parent phandle.Signed-off-by: Moritz Fischer
Cc: Heiko Schocher
Cc: Bin Meng
Cc: Simon Glass
Cc: Michal Simek
Cc: u-boot@lists.denx.de -
Adding Kconfig for SYS_I2C_S3C24X0.
Signed-off-by: Jaehoon Chung
Signed-off-by: Minkyu Kang -
If CONFIG_SYS_I2C_S3C24X0_SLAVE isn't defined, then complie error should
be occurred.
This patch is for preventing it.Signed-off-by: Jaehoon Chung
Signed-off-by: Minkyu Kang -
- Enable eMMC driver for LD11/LD20 SoCs
- Refactoring of SoC init code
- Bug fix of pinctrl driver -
Fix the pin-mux values for the MDC, MDIO, MDIO_INTL, PHYRSTL pins.
Fixes: fc9da85c6059 ("pinctrl: uniphier: add Ethernet pin-mux settings")
Signed-off-by: Masahiro Yamada
17 Jan, 2017
7 commits
-
Latest gcc 6.2 compiler is throwing the below warning for am335x_baltos_defconfig
drivers/usb/gadget/ether.c:501:17: warning: 'mdlm_detail_desc' defined but not used [-Wunused-const-variable=]
static const u8 mdlm_detail_desc[] = {Guard mdlm_detail_desc with CONFIG_USB_ETH_SUBSET to avoid the warning
Reported-by: Dan Murphy
Signed-off-by: Lokesh Vutla -
Drop board_ehci_power when dm usb used and switch to use
regulator api to handle vbus.Signed-off-by: Peng Fan
Cc: Marek Vasut
Cc: Simon Glass
Cc: Stefano Babic -
Implement ofdata_to_platdata to set the type to host or device.
- Check "dr-mode" property.
- If there is no "dr-mode", check phy_ctrl for i.MX6
and phy_status for i.MX7Signed-off-by: Peng Fan
Cc: Marek Vasut
Cc: Simon Glass
Cc: Stefano Babic -
Move symbol to Kconfig to cleanup configuration file.
Signed-off-by: Michal Simek
-
GCC 6.1 complains about this.
drivers/usb/gadget/dwc2_udc_otg.c:72:19: warning: 'driver_desc'
defined but not used [-Wunused-const-variable=]
static const char driver_desc[] = DRIVER_DESC;
^~~~~~~~~~~Signed-off-by: Masahiro Yamada
16 Jan, 2017
2 commits
-
Dropped becuase
- driver not used any board.
- no dm conversion.Cc: Angelo Dureghello
Cc: Richard Retanubun
Signed-off-by: Jagan Teki
Acked-by: Angelo Dureghello
15 Jan, 2017
3 commits
-
Unfortunately version 2 of this patch was applied which was missing some
changes. Fix this.Signed-off-by: Meng Yi
Acked-by: Simon Glass
Signed-off-by: Simon Glass -
Replace hardcoded value with defined constant SECTOR_BYTES.
Signed-off-by: Ladislav Michl
Reviewed-by: Tom Rini -
There is no CONFIG_OF_PLATDATA, only CONFIG_SPL_OF_PLATDATA, so rename
the two references to CONFIG_OF_PLATDATA to CONFIG_SPL_OF_PLATDATA.Signed-off-by: Tom Rini
14 Jan, 2017
2 commits
-
Dropped becuase
- driver and related configs not used any board.
- no dm conversion.Cc: Heiko Schocher
Cc: Sergey Kostanbaev
Signed-off-by: Jagan Teki -
If the splash file doesn't exist, the booting stops bricking
the boards. Check return value of prepare function and stop
decoding the logo data if splash prepare stage failed.Signed-off-by: Anatolij Gustschin
13 Jan, 2017
1 commit