11 Nov, 2011
16 commits
-
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
This patch adds SPL code for the M28 board.
Signed-off-by: Marek Vasut
Cc: Andy Fleming
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
This contains support for the following components:
- DUART
- MMC
- Both FEC interfaces
- NAND
- I2C (RTC, EEPROM)
- SPI (FLASH)Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
This tool can now generate proper image for "BootStream" files.
NOTE: This tool now works only for NAND.
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Scott Wood
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Heiko Schocher
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel
Acked-by: Heiko Schocher -
Taken from Linux kernel with minor modifications:
commit bf985969e27b507f734435a99df8bf745a3dbb2b
Author: Shawn Guo
Date: Mon Dec 20 22:57:43 2010 +0800ARM: mxs: Add iomux support
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Ben Warren
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Signed-off-by: Marek Vasut
Cc: Andy Fleming
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel
Acked-by: Andy Fleming -
This patch supports:
- Timers
- Debug UART
- ClockSigned-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel -
Fix:
zmx25.c: In function 'board_late_init':
zmx25.c:131:25: warning: variable 'padctl' set but not used [-Wunused-but-set-variable]Signed-off-by: Stefano Babic
10 Nov, 2011
10 commits
-
add new configuration file da850_am18xxevm.h for AM18xx boards
which are based on da850 SOC. AM18xx has WINBOND spi flash which
is indicated in the config file. And make appropriate changes in
board.cfg for building.Signed-off-by: Nagabhushana Netagunte
Signed-off-by: Sandeep Paulraj -
This is needed to support the latest kernel versions.
Cc: Albert ARIBAUD
Cc: Sandeep Paulraj
Signed-off-by: Alexander Holler
Signed-off-by: Dirk Behme
Signed-off-by: Tom Rini
Signed-off-by: Sandeep Paulraj -
Cc: Albert ARIBAUD
Cc: Sandeep Paulraj
Signed-off-by: Tom Rini
Signed-off-by: Sandeep Paulraj -
The devkit8000 ships with either a 128MB or 256MB NAND chip. In
order for SPL to work with 256MB NAND CONFIG_SYS_NAND_5_ADDR_CYCLE
needs to be set. After talking with Scott Wood this should be
safe to set even for smaller NAND chips.Cc: Scott Wood
Cc: Frederik Kriewitz
Cc: Albert ARIBAUD
Signed-off-by: Tom Rini
Signed-off-by: Sandeep Paulraj -
This enables Vpp and disables the flash protection on the
Integrator when starting U-Boot. The integrator/AP has double
protection mechanisms: this one and the EBI protection bit
(patch earlier), the Integrator/CP has only one line of
protection in these registers.Signed-off-by: Linus Walleij
-
Break out the AP system controller and CP "CP controller"
registers into a header file, it gives better overview than
hardcoding its values and other disturbing practices.Signed-off-by: Linus Walleij
-
This reconfigures the EBI (External Bus Interface) on the
integrator so that chip select 1, handling the flash memory, is
set to writeable. Without this it is not possible for U-Boot to
access flash memory and it crashes on startup since CFI won't
work properly.Since this is the first time we use the EBI, we create a header
file for its registers.Signed-off-by: Linus Walleij
-
Casting around to *(volatile ulong *) doesn't look good, so include
the macros and use good old readl() instead.Signed-off-by: Linus Walleij
-
Do away with the config.mk file and move the text offset to the
config files to make things easier.Signed-off-by: Linus Walleij
-
Alter the board.cfg to pass core module configuration flags
so we can make compile-time switches for different core
modules. These are already in use for some low-level code,
they just got lost in the conversion to the new build
system.Signed-off-by: Linus Walleij
09 Nov, 2011
5 commits
-
Signed-off-by: David Mueller
-
This allows the SPL to avoid compiling in the CPU support code.
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel
Cc: Scott Wood -
When booting from Flash, the Integrator remaps its flash memory
from 0x24000000 to 0x00000000, and starts executing it at
0x00000000. This ROM thus hides the RAM underneath and first
0x40000 bytes of the memory cannot be tested by get_ram_size().
So let's test from 0x40000 to the end of detected memory
instead.Signed-off-by: Linus Walleij
-
timer.c used static data and are called before relocation.
Move all static variables into global_data structure. Also cleanup
timer.c from unused stubs and make it truly use 64 bit tick values.Remove reset_timer_masked() get_timer_masked()
reference: arch/arm/cpu/arm926ejs/at91/timer.c
Based on Reinhard Meyer 's patches
5dca710a3d7703e41da0e9894f2d71f9e25bea6b
cfff263f41e32c7ba2ee9162a8cc6423eb5a8390Signed-off-by: Po-Yu Chuang
Tested-by: Macpaul Lin -
Signed-off-by: Asen Chavdarov Dimov
Acked-by: Igor Grinberg
08 Nov, 2011
9 commits
-
add a function in board file to pass board revision
info to kernel. Revision number 0 and 1 are passed in
case of DM6467 and DM6467T respectively.Signed-off-by: Manjunath Hadli
Signed-off-by: Sandeep Paulraj -
add new configuration file for dm6467T and appropraite changes
in boards.cfg. dm6467T is the new varaiant of dm6467 SOC which
supports 33 MHz reference clock where as dm6467 supports 27 MHz
reference clock.Signed-off-by: Manjunath Hadli
Signed-off-by: Sandeep Paulraj -
da850_ddr_setup() expects the BOOTUNLOCK bit to be set in
If BOOTUNLOCK is not set in this define, several configuration
bits will not be writeable and the code will not work.Since the BOOTUNLOCK and TIMUNLOCK bits are not configuration options
but access control bits, this patch changes the code to work
irrespective of the value of these bits in CONFIG_SYS_DA850_DDR2_SDBCR.Signed-off-by: Christian Riesch
Cc: Heiko Schocher
Cc: Paulraj Sandeep
Signed-off-by: Sandeep Paulraj -
The LPSC functions defined in
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
are replaced by those already defined in
arch/arm/cpu/arm926ejs/davinci/psc.c.Signed-off-by: Christian Riesch
Cc: Heiko Schocher
Cc: Paulraj Sandeep
Cc: Albert ARIBAUD
Acked-by: Heiko Schocher
Signed-off-by: Sandeep Paulraj -
Rename arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c and
arch/arm/include/asm/arch-davinci/am1808_lowlevel.h to da850_lowlevel.c
and da850_lowlevel.h since they apply not only to the AM1808 SoC
but to all DA850 chips. The function names and #defines are changed
likewise.Signed-off-by: Christian Riesch
Cc: Heiko Schocher
Cc: Paulraj Sandeep
Cc: Albert ARIBAUD
Acked-by: Heiko Schocher
Signed-off-by: Sandeep Paulraj -
This patch fixes following compile error for da8xx evm
da830evm.c: In function 'board_init':
da830evm.c:222: error: 'DAVINCI_SYSCFG_SUSPSRC_UART2' undeclared (first use in this function)
da830evm.c:222: error: (Each undeclared identifier is reported only once
da830evm.c:222: error: for each function it appears in.)
make[2]: *** [da830evm.o] Error 1similarly for da850evm.
introduced through commit:
f9fc237f1f07d4e5ff7c9c2da39cabc8d3d7b339Signed-off-by: Prabhakar Lad
Signed-off-by: Sandeep Paulraj -
Signed-off-by: David Mueller
-
* 'master' of git://git.denx.de/u-boot-mpc83xx:
powerpc/mpc83xx: Add 33.33MHz support for mpc8360emds
powerpc/mpc83xx: Add 512MB DDR support for mpc8360emds
mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code
mpc83xx: Cleanup usage of LBC constants
mpc83xx: Cleanup usage of DDR constants
mpc83xx: Cleanup usage of BAT constants
mpc83xx: cosmetic: vme8349.h checkpatch compliance
mpc83xx: cosmetic: ve8313.h checkpatch compliance
mpc83xx: cosmetic: sbc8349.h checkpatch compliance
mpc83xx: cosmetic: mpc8308_p1m.h checkpatch compliance
mpc83xx: cosmetic: kmeter1.h checkpatch compliance
mpc83xx: cosmetic: TQM834x.h checkpatch compliance
mpc83xx: cosmetic: SIMPC8313.h checkpatch compliance
mpc83xx: cosmetic: MVBLM7.h checkpatch compliance
mpc83xx: cosmetic: MPC837XERDB.h checkpatch compliance
mpc83xx: cosmetic: MPC837XEMDS.h checkpatch compliance
mpc83xx: cosmetic: MPC8360ERDK.h checkpatch compliance
mpc83xx: cosmetic: MPC8360EMDS.h checkpatch compliance
mpc83xx: cosmetic: MPC8349ITX.h checkpatch compliance
mpc83xx: cosmetic: MPC8349EMDS.h checkpatch compliance
mpc83xx: cosmetic: MPC832XEMDS.h checkpatch compliance
mpc83xx: cosmetic: MPC8323ERDB.h checkpatch compliance
mpc83xx: cosmetic: MPC8315ERDB.h checkpatch compliance
mpc83xx: cosmetic: MPC8313ERDB.h checkpatch compliance
mpc83xx: cosmetic: MPC8308RDB.h checkpatch compliance
mpc83xx: cosmetic: MERGERBOX.h checkpatch compliance
mpc83xx: Fix ipic structure definition
powerpc, mpc83xx: add DDR SDRAM Timing Configuration 3 definitions
cosmetic, powerpc, mpc83xx: checkpatch cleanup
powerpc/83xx: move km 83xx specific i2c code to km83xx_i2c
mpc83xx: fix global timer structure definition -
The new MPC8360EMDS board changes the oscillator to 33.33MHz
in order to support QE 500MHz since 2008.Signed-off-by: Jerry Huang
Signed-off-by: Kim Phillips
