10 Oct, 2014
1 commit
09 Oct, 2014
4 commits
-
SCIF of koelsch use external clock mode.
This enables external clock mode on koelsch board.Signed-off-by: Nobuhiro Iwamatsu
-
SCIF of lager use external clock mode.
This enables external clock mode on lager board.Signed-off-by: Nobuhiro Iwamatsu
-
The clock of SCIF (serial port) of lager is supplied from External
Clock. And value of clock is 14.7456MHz.Signed-off-by: Nobuhiro Iwamatsu
-
The single file conflict below is actually trivial.
Conflicts:
board/boundary/nitrogen6x/nitrogen6x.c
08 Oct, 2014
12 commits
-
Enable this feature to support driver model before relocation.
Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
Change this board to add a device tree.
Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
Change this board to add a device tree.
This also adds a pinmux header file although it is not used as yet.
Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
Most of the smdkv310 features are common with other exynos4 boards. To
permit easier addition of driver model support, use the common file and
add a device tree file.Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
Most of the arndale features are common with other exynos5250 boards. To
permit easier addition of driver model support, use the common file.Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
These boards do not in fact have a Chrome OS EC, nor a TPS565090 PMIC, so
move the settings into a separate common file to be used by those that need
it.Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
A few things are common but are not in the common file. Fix this and
rename the file to fit with the other exynos*-common files.Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
Since exynos4 and exyno5 share many settings, we should move these into
a common file to avoid duplication.In effect the changes are that all exynos boards now have EXT4 and FAT
write support. This affects exynos5250 and exynos5420 which previously
did not. This also disables the ext2 commands which are equivalent to
ext4 anyway.Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
We want exynos5250-dt.h to be a board which can support any exynos5250
device. This matches the naming used by Linux. As a first step, rename
the existing -dt files to -common to make it clear they are common files,
and not specific boards.Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
With the driver model conversion we are going to be using driver model for
SPI and not for I2C. This works OK so long as a board doesn't need both
dm and non-dm versions of the cros_ec driver. Since pit uses SPI and snow
uses I2C we need to split the configs so that only one driver is compiled
for each platform.We can fix this later when driver model supports I2C.
Signed-off-by: Simon Glass
Signed-off-by: Minkyu Kang -
Exynos 5250 boards (snow, spring) use the I2C driver but Exynos 5420 boards
cannot due to a hardware design decision. Select the correct driver to use
in each case.Signed-off-by: Simon Glass
Tested-by: Ajay Kumar
Signed-off-by: Minkyu Kang -
Things run faster when the data cache is enabled, so turn it on along with
the 'dcache' command.Signed-off-by: Simon Glass
Tested-by: Ajay Kumar
Signed-off-by: Minkyu Kang
07 Oct, 2014
1 commit
06 Oct, 2014
18 commits
-
Support reading/writing ext4 partitions.
Signed-off-by: Kevin Mihelich
Signed-off-by: Eric Nelson -
Enable 'fastboot' command.
This is currently enabled but not yet functional. Including it in the
configuration will ease further testing and development as discussed
on the mailing list.Signed-off-by: Eric Nelson
-
Enable the 'gpio' command to allow reading and toggling of GPIO
pins.Signed-off-by: Eric Nelson
-
Some users (QNX and Windows CE users in particular) have asked
to disable the Penguin shown on the display at boot time.Signed-off-by: Eric Nelson
Acked-by: Stefano Babic -
Increase the maximum number of arguments allowed by the Hush parser.
This prevents errors when users or scripts aren't quoting parameters
when setting the "bootargs" variable et al.Signed-off-by: Troy Kisky
Signed-off-by: Eric Nelson -
Enable the "i2c edid" command to query data from an attached
HDMI monitor.Usage is typically this:
U-Boot > i2c dev 1
U-Boot > i2c edid 0x50
...Signed-off-by: Eric Nelson
-
Enable the 'mtest' command on Nitrogen6x and SABRE Lite boards.
Signed-off-by: Eric Nelson
-
Enable the use of USB keyboards on SABRE Lite and Nitrogen6x boards.
Signed-off-by: Eric Nelson
-
If no boot script was found, expose internal storage over the
USB mass storage gadget to allow easy programming.This is especially useful when SD cards are inaccessible or when
loading SATA drives.More details are available in this blog post:
http://boundarydevices.com/u-boot-usb-mass-storage-gadget/Signed-off-by: Eric Nelson
-
Support RAM disks by setting initrd_high. See commit 7e9603e
Signed-off-by: Eric Nelson
-
Remove the individual attempts to load using ext2 and fat, replace with the
generic load command supporting available filesystem types.Signed-off-by: Kevin Mihelich
-
This patch enables boot to USB storage devices by expanding on the list
of boot devices.Because the USB startup currently takes a long time, it places USB at
the end of the list of supported devices.You can over-ride the boot order using the bootdevs environment variable.
For instance, this will make USB the first (highest priority) device:U-Boot > setenv bootdevs usb mmc sata
U-Boot > saveenvSigned-off-by: Diego Rondini
Signed-off-by: Eric Nelson -
Add support for the USB mass storage to enable access to on-board
storage (especially eMMC and SATA).Details at:
http://boundarydevices.com/u-boot-usb-mass-storage-gadget/Signed-off-by: Eric Nelson
-
This patch adds support for the OT1200 series of devices.
Following components are used in u-boot:
+ ethernet
+ i2c
+ emmc
+ gpioFor more details see README.
Changes v1 > v2
- make use of enable_cspi_clock(..)
- fix usage of OUTPUT_40OHM define
- added READMEChanges v2 > v3
- improve spelling in README
- added own copy of mx6q_4x_mt41j128.cfgSigned-off-by: Christian Gmeiner
-
Remove this tab from env, since it's useless, just use spaces.
Signed-off-by: Marek Vasut
Cc: Stefano Babic -
Remove this tab from env, since it's useless, just use spaces.
Signed-off-by: Marek Vasut
Cc: Stefano Babic -
PERST_GPIO and POWER_GPIO are currently swapped.
Fix the GPIO assignments as per the board schematics.
Signed-off-by: Fabio Estevam
-
Besides converting the LS-XHL and LS-CHLv2 to generic board, fix a typo
which accidentally reverted the bootsource to 'hdd' although the default
bootsource should be 'legacy'.Cc: Tom Rini
Cc: Prafulla Wadaskar
Signed-off-by: Michael Walle
Signed-off-by: Prafulla Wadaskar
05 Oct, 2014
1 commit
-
These are used by Panasonic UniPhier SoC family.
Signed-off-by: Masahiro Yamada
01 Oct, 2014
3 commits
-
This patch add HUSH command parser
Signed-off-by: Gerald Kerma
Changes in v1:
- add HUSH command parser
Signed-off-by: Prafulla Wadaskar -
This patch redefine MTDPARTS
Signed-off-by: Gerald Kerma
Changes in v1:
- redefine MTDPARTS
Signed-off-by: Prafulla Wadaskar -
This patch add MTDIDS and MTDPARTS defaults settings to sheevaplug
Signed-off-by: Gerald Kerma
Changes in v1:
- add MTDIDS and MTDPARTS default to sheevaplug
Signed-off-by: Prafulla Wadaskar