17 Jul, 2013
1 commit
-
Fill the right command type when using CMD12 to stop data transfer.
Signed-off-by: Haijun Zhang
CC: Fleming Andrew-AFLEMING
CC: Scott Wood
Signed-off-by: Andy Fleming
16 Jul, 2013
8 commits
-
Before setting: mipi_lcd_device.reverse_panel = 1, the Trats's LCD panel
was flipped by 180 degrees.The flip was caused by following change:
Exynos: Change get_timer() to work correctly
SHA1: 3d00c0cb96ff93a929700b80d89cb905e5ab5315This commit fixed udelay(), which is necessary (due to HW LCD controller
oddity) for mipi-dsi correct operation. As a result the display orientation
has been switched.As a follow up, the hwrevision() function has been removed, since it was
used only in this particular place.Test HW: Trats Exynos4210 rev 0.
Signed-off-by: Lukasz Majewski
Signed-off-by: Kyungmin Park
Cc: Minkyu Kang
Acked-by: Minkyu Kang -
Provide proper setting for the APLL fout frequency calculation for
Exynos4 based targets (especially Exynos4210 - Trats board).Signed-off-by: Lukasz Majewski
Cc: Minkyu Kang
Acked-by: Minkyu Kang
Acked-by: Simon Glass
Tested-by: Simon Glass -
Fix:
mpc8323erdb.c: In function 'mac_read_from_eeprom':
mpc8323erdb.c:198:3: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]Signed-off-by: Wolfgang Denk
cc: Timur Tabi
cc: Kim Phillips -
With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type,
which is required to represent block numbers for storage devices that
exceed 2TiB (the block size usually is 512B), e.g. recent hard drivesWe now use lbaint_t for partition offset to reflect the lbaint_t change,
and access partitions beyond or crossing the 2.1TiB limit.
This required changes to signature of ext4fs_devread(), and type of all
variables relatives to block sector.ext2/ext4 fs uses logical block represented by a 32 bit value. Logical
block is a multiple of device block sector. To avoid overflow problem
when calling ext4fs_devread(), we need to cast the sector parameter.Signed-off-by: Frédéric Leroy
-
Some ARM compilers may emit code that makes unaligned accesses when
faced with constructs such as:char name[12] = "bootmenu_";
same fix as commit: 064d55f8bc8d7d205ed0be6abb6717e92eeb7cad
=========================================================
data abortMAYBE you should read doc/README.arm-unaligned-accesses
pc : [] lr : []
sp : 3f346a58 ip : 3ff9c8e6 fp : 02000060
r10: 00000000 r9 : 3df47fc0 r8 : 3f347f40
r7 : 00000000 r6 : 00000000 r5 : 00000003 r4 : 3f759140
r3 : 000003f0 r2 : 00000000 r1 : 000003f1 r0 : 00000000
Flags: nzCv IRQs on FIQs off Mode SVC_32
Resetting CPU ...
======================================================Signed-off-by: Lan Yixun (dlan)
-
"cramfsload uImage_1" succeeds even though the actual file is named
"uImage".Fix file name comparison when one name is the prefix of the other.
Signed-off-by: Holger Brunck
cc: Wolfgang Denk
cc: Albert ARIBAUD -
adjust instructions for the invocation of Patman's self test: the -t
flag appears to have a different meaning now, refer to the --test option
for the builtin unit test; adjust a directory location and make sure to
run the file which resides in the source directorySigned-off-by: Gerhard Sittig
Acked-by: Simon Glass -
The block device expects to see lbaint_t for the blknr parameter. Change
the SCSI read/write functions to suit.This fixes the following build warnings for coreboot:
cmd_scsi.c: In function ‘scsi_scan’:
cmd_scsi.c:119:30: error: assignment from incompatible pointer type [-Werror]
cmd_scsi.c:120:32: error: assignment from incompatible pointer type [-Werror]Signed-off-by: Simon Glass
15 Jul, 2013
1 commit
-
The files board/qi/qi_lb60/qi_lb60.c and include/configs/qi_lb60.h were
licensed under the GPL v3 or later, and not v2 or later. As this is
incompatible with the project, revert this board support until the
responsible parties are available to re-license (if so desired) under
GPL v2.Signed-off-by: Tom Rini
13 Jul, 2013
5 commits
-
Signed-off-by: Tom Rini
-
A recent bootm fix left the error path incomplete. If CONFIG_TRACE is
set it may still not be a supported command, so cover that with the
unsupported subcommand print. Once we handle BOOTM_STATE_OS_GO, we can
just move into the error handler itself, no need for a goto there.Signed-off-by: Simon Glass
[trini: Update slightly based on Simon's changes to also cover
CONFIG_TRACE/BOOTM_STATE_FAKE_OS_GO]
Signed-off-by: Tom Rini -
The driver triggered a BUG() in nand_base.c:3214/nand_scan_tail()
because the ecc.strength was not set in NAND_ECC_HW_SYNDROME ECC
mode.Signed-off-by: Marek Vasut
Cc: Benoit Thebaudeau
Cc: Fabio Estevam
Cc: Scott Wood
Cc: Stefano Babic -
A FIT image with a ramdisk that sets the entry or load points to 0x0
must be treated as meaning "leave in place" and NOT "relocate to 0x0".
This regression was introduced in a51ec63.Signed-off-by: Stefano Babic
12 Jul, 2013
21 commits
-
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and
serial.Conflicts:
arch/arm/dts/exynos5250.dtsiSigned-off-by: Tom Rini
-
The arguments were out of place since commit 983c72f, since this file was
missed and not tested. Correct this.Signed-off-by: Simon Glass
-
If a specific configuraion is selected by the bootm command, e.g. with
'bootm 84000000#recoveryconf' we must honour this for not just the kernel,
but also the ramdisk and FDT.In the conversion to using a common fit_image_load() function for loading
images from FITs (commits a51ec63 and 53f375f) this feature was lost.
Reinstate it by passing the selected configuration back from
fit_image_load() to boot_get_kernel(), then use this configuration
(which is stored in images->fit_uname_cfg) in both boot_get_ramdisk()
and boot_get_fdt().Signed-off-by: Simon Glass
-
The OS function is now always called with the PREP stage. Adjust the
remaining bootm OS functions to deal with this correctly.Signed-off-by: Simon Glass
-
This is not needed as we already print 'OK' later in all cases.
Signed-off-by: Simon Glass
-
With ELDK4.2 we were getting a warning that load_end may be used
uninitialized in calling lmb_reserve. This could not be the case,
however. If we re-order the checks (and make them slightly clearer as
well) the warning goes away. bootm_load_os may only return 0 on
success, BOOTM_ERR_OVERLAP in a non-fatal overlap (already covered in
comments) or a fatal BOOTM_ERR that is covered in the error handler.Signed-off-by: Tom Rini
-
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.Signed-off-by: Otavio Salvador
Acked-by: Fabio Estevam -
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.Signed-off-by: Otavio Salvador
Acked-by: Stefano Babic -
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.Signed-off-by: Otavio Salvador
Acked-by: Fabio Estevam -
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.Signed-off-by: Otavio Salvador
Acked-by: Fabio Estevam -
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.Signed-off-by: Otavio Salvador
Acked-by: Fabio Estevam -
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.Signed-off-by: Otavio Salvador
Acked-by: Jason Liu -
The MX28 multi-layer AHB bus can be too slow and trigger the
FEC DMA too early, before all the data hit the DRAM. This patch
ensures the data are written in the RAM before the DMA starts.
Please see the comment in the patch for full details.This patch was produced with an amazing help from Albert Aribaud,
who pointed out it can possibly be such a bus synchronisation
issue.Signed-off-by: Marek Vasut
Cc: Albert ARIBAUD
Cc: Fabio Estevam
Cc: Stefano Babic
Tested-by: Fabio Estevam
Tested-by: Alexandre Pereira da Silva -
Remove incorrectly called and duplicate flush_dcache_range() call
from fec_mxc driver. The call is not needed, since the caches are
already flushed in fec_tbd_init(), moreover the second argument should
be the ending address, not size.Signed-off-by: Marek Vasut
Reported-by: Albert Aribaud
Cc: Stefano Babic
Cc: Tom Rini -
this is usefull when writing an UBI image which contains
and UBIFS volume (check README.nand and UBI FAQ for more
details)Signed-off-by: Marek Vasut
Cc: Stefano Babic -
Signed-off-by: Stephen Warren
Signed-off-by: Tom Warren -
Signed-off-by: Stephen Warren
Signed-off-by: Tom Warren -
Add USB EHCI, storage and network support.
Tested on Tegra30 Cardhu, and Tegra114 Dalmore
platforms. All works well.Signed-off-by: Jim Lin
Signed-off-by: Tom Warren -
Tegra30 and Tegra114 are compatible except PLL parameters.
Tested on Tegra30 Cardhu, and Tegra114 Dalmore
platforms. All works well.Signed-off-by: Jim Lin
Signed-off-by: Tom Warren -
Add DT node for USB EHCI function.
Add support for T30-Cardhu, T30-Beaver, T114-Dalmore boards.Signed-off-by: Jim Lin
Reviewed-by: Stephen Warren
Tested-by: Stephen Warren
Signed-off-by: Tom Warren
11 Jul, 2013
3 commits
-
Newer gcc versions warn about unused variables. This patch corrects a few of
those warnings that popped up in a build for the palmtreo680 board.Signed-off-by: Mike Dunn
-
The DFU's state machine original implementation author and copyright were
missing.Signed-off-by: Lukasz Majewski
Acked-by: Stefan Schmidt
10 Jul, 2013
1 commit
-
As a zImage does not have a U-Boot header, we cannot really do what
BOOTM_STATE_FINDOTHER does, exactly. Break the ramdisk/fdt portions of
bootm_find_other into bootm_find_ramdisk/fdt which can be called in both
cases.Signed-off-by: Tom Rini