05 Apr, 2009
20 commits
-
On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
> Currently the mtdparts commands are included in the jffs2 command support.
> This doesn't make sense anymore since other commands (e.g. UBI) use this
> infrastructure as well now. This patch separates the mtdparts commands from
> the jffs2 commands making it possible to only select mtdparts when no JFFS2
> support is needed.... and to make it useful for NAND chips as well, we should also remove now
unrelated CONFIG_JFFS2_NAND. Note that struct part_info etc is in
jffs2/load_kernel.h which is a bit misleading filename for that purpose,
but that can be fixed later (tm).Signed-off-by: Ladislav Michl
-
Rather than sticking Blackfin-specific stuff into the eeprom example, use
an indirect macro so that any board can override it with their own magic
sauce in their board config file.Also fix some spurious semi-colons in defines while I'm at it ...
Signed-off-by: Mike Frysinger
CC: Ben Warren -
Do not initialize phy on startup, instead initialize it
when we actually need it.Signed-off-by: Sascha Hauer
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
Acked-by: Stelian Pop -
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
Update the rm9200 reset sequence to try executing a board-specific reset
function and move specific board reset to board.Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
introduce serial_exit for this purpose. Use it only when the rm9200
serial driver is activeSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
add CONFIG_AT91RM9200_USART to activate the driver
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
The AT91RM9200-EK Evaluation Board supports the AT91RM9200
ARM9-based 32-bit RISC microcontroller and enables real-time code development
and evaluation.Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507with
- NOR (cfi driver)
- DataFlash
- USB OHCI
- Net
- I2C (hard)Signed-off-by: Ulf Samuelsson
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD -
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
Signed-off-by: Nicolas Ferre
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD -
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
-
This is required so that the MAC address will be updated in the device tree.
Signed-off-by: Scott Wood
-
PCI on PQ2FADS is very similar to PCI on MPC8272ADS.
Signed-off-by: Scott Wood
04 Apr, 2009
20 commits
-
Signed-off-by: Wolfgang Denk
-
Include instead of to get htons()
prototpye.Signed-off-by: Wolfgang Denk
-
In set_ddr_laws() when we determined how much of the size requested
to be mapped was covered by the the first LAW we needed to recalculate
the size based on what was actually mapped.Signed-off-by: Kumar Gala
-
Signed-off-by: Kumar Gala
-
Rename the pci header for FSL HW so we can move some prototypes
in there and stop doing explicit externsSigned-off-by: Kumar Gala
-
Since commit a706bfc7 common/env_embedded.o and tools/envcrc were
only built when CONFIG_ENV_IS_EMBEDDED was set, but this breaks
building for many boards.We always have to build these files when CONFIG_ENV_IS_IN_FLASH is
set.Signed-off-by: Wolfgang Denk
-
Some systems have zlib.h installed in /usr/include/. This isn't the
desired file for u-boot code - we want the one in include/zlib.h.
This rename will avoid the conflict.Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Mike Frysinger -
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Mike Frysinger -
Signed-off-by: Mike Frysinger
-
Instead of special casing the different access patterns, use common
code with light macros sprinkled in to accomodate for the different
layouts of the register structure.Note that this also changes the types of the registers for the
"positively packed (>1)" cases. As the registers truly are unsigned
chars, this is surely the Right Thing, but it is a semantic change.
Note that for this case depending on the endianness on the bus, we may
see a change of behaviour.Signed-off-by: Detlev Zundel
-
Signed-off-by: Peter Tyser
-
Add support for compiling the host tools in the tools directory using
the MinGW toolchain. This produces executables which can be used on
standard Windows computers without requiring cygwin.One must specify the MinGW compiler and strip utilities as if they
were the host toolchain in order to build win32 executables, eg:make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
Signed-off-by: Peter Tyser
-
Signed-off-by: Peter Tyser
-
Create a few generic build rules to replace the current method which has
1 build target for each fileSigned-off-by: Peter Tyser
-
Files in the SRCS variable have their dependencies automatically
generated so remove duplicate explicit dependenciesSigned-off-by: Peter Tyser
-
Signed-off-by: Peter Tyser
-
Add the libfdt files to the SRCS variable so that they have their
dependencies automatically generatedSigned-off-by: Peter Tyser
-
Signed-off-by: Peter Tyser
-
This change makes the process of symlinking libfdt_internal.h
unnecessarySigned-off-by: Peter Tyser
-
crc32.c uses the zlib.h header in include/u-boot/zlib.h. The symlink
was previously necessary to give U-Boot's version of zlib.h precedence
over the host computer's version of zlib.h.Signed-off-by: Peter Tyser
