05 Nov, 2020
3 commits
-
Update address length argument
Signed-off-by: Biwen Li
-
Starting with commit 7d9701db4089 ("cmd: mdio/mii: add Kconfig help and
allow break dependency"), CMD_MDIO depends on the PHYLIB Kconfig which
should be enabled properly from the Kconfig and not through any define
from a header file.Move all LS1088AQDS configs to enable PHYLIB and related through
Kconfig options. Also, remove the defines from the header file so that
we do not redefine the same symbol.Signed-off-by: Ioana Ciornei
-
Starting with commit 7d9701db4089 ("cmd: mdio/mii: add Kconfig help and
allow break dependency"), CMD_MDIO depends on the PHYLIB Kconfig which
should be enabled properly from the Kconfig and not through any define
from a header file.Move all LS1088ARDB configs to enable PHYLIB and related through
Kconfig options. Also, remove the defines from the header file so that
we do not redefine the same symbol.Signed-off-by: Ioana Ciornei
03 Nov, 2020
3 commits
-
Check for NULL return value from fdt_getprop() in fdt_fixup_remove_jr()
Signed-off-by: Priyanka Singh
-
Add check for return value of adjust_vdd()
Signed-off-by: Priyanka Singh
-
The sdhc peripheral clock support for lx2162aqds was missed.
Fixes: 1f9ecf088930 ("armv8: lx2162a: Add Soc changes to support LX2162A")
Signed-off-by: Yangbo Lu
29 Oct, 2020
19 commits
-
This adds default environment variable for ls1012aqds
Signed-off-by: Biwen Li
-
Add support of distro boot for ls1046aqds
Signed-off-by: Biwen Li
-
Drop useless environment variable installer and qspi_bootcmd
for ls1012afrwy.
Only 2 MB nor flash in ls1012afrwy. So cannot get kernel(30 MB) from
the nor flash, then drop it.Signed-off-by: Biwen Li
-
Initialize variable 'i2caddress' in adjust_vdd() to zero
Signed-off-by: Priyanka Singh
-
Enable writes to all commands for LTC3882
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for SoC LX2160A
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for LS208xA
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for LS1088A
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1028A
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1043A
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1012A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS208xA
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1088A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1046A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1043A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1028A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1012A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1021A
Signed-off-by: Biwen Li
-
Fix a bug as belows,
=> gpio status -a
"Synchronous Abort" handler, esr 0x96000061
elr: 0000000082047964 lr : 0000000082047960 (reloc)
elr: 00000000fbd72964 lr : 00000000fbd72960
x0 : 00000000ffffffff x1 : 000000000000000a
x2 : 0000000000000020 x3 : 0000000000000001
x4 : 0000000000000000 x5 : 0000000000000030
x6 : 0000000000000020 x7 : 0000000000000002
x8 : 00000000ffffffe0 x9 : 0000000000000008
x10: 0000000000000010 x11: 0000000000000006
x12: 000000000001869f x13: 0000000000000230
x14: 00000000fbc23e9c x15: 00000000ffffffff
...
resetingSigned-off-by: Biwen Li
19 Oct, 2020
8 commits
-
Since the HDP will be shared with i.MX. Move the common HDP library
codes to "driver/video/nxp/hdp" directory.
And use platform specified directory "driver/video/nxp/layerscape"
for LS driver codes and configurations.Signed-off-by: Ye Li
Reviewed-by: Alison Wang -
Initialize variable 'i2caddress' in print_vdd() to zero
Signed-off-by: Priyanka Singh
-
Add lpuart config to enable lpuart feature.
Signed-off-by: Vabhav Sharma
Signed-off-by: Yuantian Tang . -
Rename fsl-ls1028a-qds.dts to fsl-ls1028a-qds.dtsi so that
it can be used as common device tree for lpuart and duart.
Add lpuart device tree and duart device tree respectively
for qds which are used with duart and lpuart console.Signed-off-by: Vabhav Sharma
Signed-off-by: Yuantian Tang -
Add lpuart nodes to enable lpuart feature
Signed-off-by: Vabhav Sharma
Signed-off-by: Yuantian Tang -
mux changes in board file to enable lpuart1 and macro
define for lpuart1 used for mux changes in board configuation
register 13Signed-off-by: Vabhav Sharma
Signed-off-by: Yuantian Tang -
Enable eMMC HS400 mode support on LX2162AQDS.
Signed-off-by: Yangbo Lu
-
The register to enable/disable the write-permission of DBI RO
registers should be accessed via the CFG_ADDR/CFG_DATA registers
instead of accessing directly.Signed-off-by: Hou Zhiqiang
09 Oct, 2020
2 commits
-
add alias for dspi
Signed-off-by: Zhao Qiang
-
As per hardware documentation, ECx_PMUX has precedence
over SerDes protocol.
For LX2160/LX2162 if DPMACs 17 and 18 are enabled as SGMII
through SerDes protocol but ECx_PMUX configured them as RGMII,
then the ports will be configured as RGMII and not SGMII.Signed-off-by: Razvan Ionut Cirjan
05 Oct, 2020
1 commit
-
Variable 'compat' is never NULL so drop the check.
Signed-off-by: Laurentiu Tudor
01 Oct, 2020
2 commits
-
The tsec driver now requires DM_MDIO when DM_ETH is enabled. To avoid
build errors, enable DM_MDIO in these boards' configs before we actually
add DM_MDIO support to tsec.Signed-off-by: Vladimir Oltean
Signed-off-by: Hou Zhiqiang -
make lx2162aqds platform to enable gpio driver.
Signed-off-by: Hui Song
Signed-off-by: Ran Wang
29 Sep, 2020
2 commits
-
Enable the DM_ETH and DM_MDIO config.
On P2020RDB, the eTSEC1 is connecting with a switch VSC7385,
so also enable the fixed PHY support.Signed-off-by: Hou Zhiqiang
Reviewed-by: Vladimir Oltean -
P2020RDB implements 3 enhanced three-speed Ethernet controllers,
and the connection is shown below:
eTSEC1: Connected to RGMII switch VSC7385
eTSEC2: Connected to SGMII PHY VSC8221
eTSEC3: Connected to SGMII PHY AR8021Signed-off-by: Hou Zhiqiang