Eric Lee / smarc-uboot

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

14 Feb, 2018

1 commit

20 Jan, 2018

1 commit

  • e6e5ecc5e   m68k: Drop unreferenced CONFIG_* defines ... Browse Code »

    The following config symbols are only defined once and never referenced
    anywhere else:

    CONFIG_AMCORE
    CONFIG_ASTRO5373L
    CONFIG_M52277EVB
    CONFIG_M5253DEMO
    CONFIG_M5253EVBE
    CONFIG_M5275EVB
    CONFIG_M54418TWR
    CONFIG_STMARK2

    Most of them are config symbols named after the respective boards which
    seems to have been a standard practice at some point.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

04 Sep, 2017

4 commits

  • e090579d0   include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions ... Browse Code »

    This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
    equal to CONFIG_SYS_CBSIZE in numerous configuration files.

    We remove such definitions in two situations:

    - CONFIG_SYS_CBSIZE is otherwise not defined in the board
    configuration file, which means the default value of
    CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
    larger.

    - CONFIG_SYS_CBSIZE is defined in the board configuration file, but
    to a value equal or less than 512. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
    is equal or larger.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 1f20fc53b   include/configs: drop default definitions of CONFIG_SYS_MAXARGS ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 432e39806   include/configs: drop default definitions of CONFIG_SYS_PBSIZE ... Browse Code »
    1

    Now that the fallback value of CONFIG_SYS_PBSIZE in
    include/config_fallbacks.h has been adjusted, remove its definition
    from a large number of board configuration files.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 3784c789e   include/configs: remove CONFIG_SYS_CBSIZE when the default value is used ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini
    [trini: Drop from stih410-b2260.h]
    Signed-off-by: Tom Rini

    Thomas Petazzoni
     

26 Jul, 2017

2 commits

23 Jul, 2017

1 commit

  • f3603b438   powerpc: Remove unneccessary #ifdefs in reginfo ... Browse Code »

    reginfo command is calling mpc8xx_reginfo(), mpc85xx_reginfo()
    or mpc86xx_reginfo() based on CONFIG_ symbol.
    As those 3 functions can't me defined at the same time, let's
    rename them print_reginfo() to avoid the #ifdefs
    The name is kept generic as it is not at all dependent on
    powerpc arch and any other arch could want to also print
    such information.

    In addition, as the Makefile compiles cmd/reginfo.c only when
    CONFIG_CMD_REGINFO is set, there is no need to enclose the U_BOOT_CMD
    definition inside a #ifdef CONFIG_CMD_REGINFO

    Lets all remove the #ifdefs around the U_BOOT_CMD as this
    file is only compiled when CONFIG_CMD_REGINFO is defined

    Finally, this is a PowerPC-only command, disable it on a number of
    non-PowerPC platforms.

    Signed-off-by: Christophe Leroy
    Signed-off-by: Tom Rini

    Christophe Leroy
     

23 May, 2017

1 commit

16 May, 2017

1 commit

15 May, 2017

1 commit

01 May, 2017

1 commit

30 Apr, 2017

1 commit

20 Mar, 2017

1 commit

28 Jan, 2017

3 commits

24 Oct, 2016

1 commit

10 Sep, 2016

1 commit

10 Jun, 2016

1 commit

26 Apr, 2016

2 commits

25 Nov, 2015

1 commit

21 Oct, 2015

1 commit

13 Aug, 2015

1 commit

  • 181bd9dc6   kconfig: add config option for shell prompt ... Browse Code »
    102

    Add option to set shell prompt string from menuconfig and migrate
    boards globally.

    The migration is done as follows:
    - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
    entry moved to their defconfig files.
    - Boards that defined some kind of #ifdef logic which selects the
    CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
    right before the #ifdef logic and were left alone.
    - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
    CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
    files. This results in a streamlined default value across platforms, and
    includes the following files: spear-common, sunxi-common, mv-common,
    ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
    - Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
    not updated in their respective defconfig files under the assumption that
    since they did not explicitly define a value, they're fine with whatever
    the default is.
    - On the other hand, boards that relied on a value defined in some
    _common.h file such as woodburn_common, rpi-common,
    bur_am335x_common, ls2085a_common, siemens_am33x_common, and
    omap3_evm_common, had their values moved to the respective defconfig files.
    - The define V_PROMPT was removed, since it is not used anywhere except for
    assigning a value for CONFIG_SYS_PROMPT.

    Cc: Tom Rini
    Cc: Masahiro Yamada
    Cc: Stefano Babic
    Cc: Igor Grinberg
    Signed-off-by: Nikita Kiryanov
    [trini: Add spring, sniper, smartweb to conversion]
    Signed-off-by: Tom Rini

    Nikita Kiryanov
     

26 Jun, 2015

2 commits

  • ef0f2f575   Move defaults from config_cmd_default.h to Kconfig ... Browse Code »

    This sets the default commands Kconfig to match
    include/config_cmd_default.h commands in the common/Kconfig and removes
    them from include/configs.

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
    Signed-off-by: Tom Rini

    Joe Hershberger
     
  • c9bb942e2   Move default y configs out of arch/board Kconfig ... Browse Code »

    Some archs/boards specify their own default by pre-defining the config
    which causes the Kconfig system to mix up the order of the configs in
    the defconfigs... This will cause merge pain if allowed to proliferate.

    Remove the configs that behave this way from the archs.

    A few configs still remain, but that is because they only exist as
    defaults and do not have a proper Kconfig entry. Those appear to be:

    SPIFLASH
    DISPLAY_BOARDINFO

    Signed-off-by: Joe Hershberger
    [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
    drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
    Signed-off-by: Tom Rini

    Joe Hershberger
     

01 Jun, 2015

1 commit

24 Apr, 2015

1 commit

28 Mar, 2015

1 commit

05 Nov, 2013

1 commit

15 Oct, 2013

1 commit

24 Jul, 2013

2 commits

23 Jul, 2013

2 commits

16 Oct, 2012

1 commit

21 Jun, 2012

1 commit