24 Feb, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIGSigned-off-by: Adam Ford
[trini: Re-run the migration]
Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.I did not attempt to add more default values in and for now will leave
that to maintainers.Signed-off-by: Tom Rini
16 Jan, 2018
1 commit
-
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig.
Signed-off-by: Nobuhiro Iwamatsu
Acked-by: Joe Hershberger
10 Jan, 2018
1 commit
-
The following config symbols are only defined once and never referenced
anywhere else:CONFIG_AP325RXA
CONFIG_AP_SH4A_4A
CONFIG_CPU_SH_TYPE_R
CONFIG_ECOVEC
CONFIG_ESPT
CONFIG_MIGO_R
CONFIG_MPR2
CONFIG_MS7720SE
CONFIG_MS7722SE
CONFIG_MS7750SE
CONFIG_R0P7734
CONFIG_R2DPLUS
CONFIG_RSK7203
CONFIG_RSK7264
CONFIG_RSK7269
CONFIG_SH7752EVB
CONFIG_SH7753EVB
CONFIG_SH7757LCR
CONFIG_SH7763RDP
CONFIG_SH7785LCRMost of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.Signed-off-by: Tuomas Tynkkynen
04 Sep, 2017
3 commits
-
CONFIG_SYS_BARGSIZE is already defined to 512 in common/image.c when
not defined. Therefore, there is no point in having board
configuration files define it to 512.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini -
Now that include/config_fallbacks.h define a sane fallback for
CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
configurations that were using the default value.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini -
Now that include/config_fallbacks.h define a sane fallback for
CONFIG_SYS_CBSIZE, we can drop the definition of this constant in all
configurations that were using the default value.Signed-off-by: Thomas Petazzoni
Reviewed-by: Tom Rini
[trini: Drop from stih410-b2260.h]
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini
12 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_SDRAMSigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
08 Aug, 2017
1 commit
-
Signed-off-by: Alexandru Gagniuc
Acked-by: Joe Hershberger
03 Aug, 2017
1 commit
-
Convert the SH Serial to Kconfig using tools/moveconfig.py tool
and a bit of manual adjustment to cater for failed conversions.Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_FLASHSigned-off-by: Simon Glass
23 May, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_JFFS2Signed-off-by: Simon Glass
20 Mar, 2017
1 commit
-
Move this in to Kconfig with a default of 115200.
Signed-off-by: Philipp Tomsich
[trini: Run moveconfig.py, reword commit slightly]
Signed-off-by: Tom Rini
03 Dec, 2016
1 commit
-
All SH boards define a checkboard() function which outputs basic board
information on boot, however generic board support requires to define
CONFIG_DISPLAY_BOARDINFO to do that, so define it for the boards.Signed-off-by: Vladimir Zapolskiy
Reviewed-by: Simon Glass
10 Sep, 2016
1 commit
-
move VERSION_VARIABLE from board config file into a
Kconfig option.Signed-off-by: Heiko Schocher
10 Jun, 2016
1 commit
-
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.Signed-off-by: Heiko Schocher
Reviewed-by: Tom Rini
Acked-by: Viresh Kumar
Acked-by: Igor Grinberg
26 Apr, 2016
2 commits
-
Update the config.h and defconfig files for the commands that 8e3c036
converted over to KconfigSigned-off-by: Tom Rini
-
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND. Due to how we have used this historically
we need to take further care here when converting.Signed-off-by: Tom Rini
06 Feb, 2016
1 commit
-
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).Signed-off-by: Bin Meng
Reviewed-by: Heiko Schocher
Reviewed-by: Simon Glass
Reviewed-by: Minkyu Kang
26 Jun, 2015
1 commit
-
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.Signed-off-by: Joe Hershberger
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini
01 Jun, 2015
1 commit
-
This also selects CONFIG_NET for any CONFIG_CMD_NET board.
Remove the imx default for CONFIG_NET.
This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).Signed-off-by: Joe Hershberger
08 Jan, 2014
2 commits
-
CONFIG_SH4 was already defined in arch/sh/sh4/config.mk.
This removes CONFIG_SH4 from board config files of SH4.Signed-off-by: Nobuhiro Iwamatsu
-
CONFIG_SH is defined in arch/sh/config.mk.
It is not necessary to define it in each board
header config header file.Signed-off-by: Masahiro Yamada
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
05 Nov, 2013
2 commits
-
Remove platform CONFIG_SYS_HZ definition for configs a-z*.
Signed-off-by: Rob Herring
-
The definitions for CONFIG_SYS_PROMPT are varied with little reason other
than to display the board name. Over half the definitions are "==> ", so
make this the default. The rest of the boards remain unchanged to avoid
breaking any external scripts expecting a certain prompt.Signed-off-by: Rob Herring
Reviewed-by: Fabio Estevam
17 Oct, 2013
1 commit
-
This changes clock definition of SCIF from CONFIG_SYS_CLK_FREQ to
CONFIG_SH_SCIF_CLK_FREQ, and clock definition of TMU from CONFIG_SYS_CLK_FREQ to
CONFIG_SH_TMU_CLK_FREQ for boards.Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
CC: Albert Aribaud
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
28 May, 2012
1 commit
-
The board with sh_eth needs to set CONFIG_SH_ETHER_PHY_MODE.
And SH7734 needs to set value of CONFIG_SH_ETHER_SH7734_MII.Signed-off-by: Nobuhiro Iwamatsu
02 Dec, 2011
1 commit
-
The new sh_eth driver uses the phy driver. So, this patch enables it.
Signed-off-by: Yoshihiro Shimoda
Signed-off-by: Nobuhiro Iwamatsu
06 Oct, 2011
1 commit
-
Now that none of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it. So scrub all references to it.Signed-off-by: Mike Frysinger
13 May, 2011
1 commit
-
commit 25ddd1fb0a2281b182529afbc8fda5de2dc16d96 left remnants of
many comments about CONFIG_SYS_GBL_DATA_SIZE.Signed-off-by: Michael Jones
02 Feb, 2011
1 commit
-
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.Signed-off-by: Nobuhiro Iwamatsu
27 Oct, 2010
1 commit
-
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool. In the result, all definitions of this value can be
deleted from the board config files. We have to make sure that all
files that reference such data include the new file.No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.Signed-off-by: Wolfgang Denk
Acked-by: Kumar Gala
08 Jul, 2009
2 commits
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
Cc: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
18 Feb, 2009
1 commit
-
The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
rather than a generic "env" command, or anything else related to the
environment. So, let's make sure the define is named accordingly.Signed-off-by: Mike Frysinger
25 Jan, 2009
1 commit
-
Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.
Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Ben Warren
19 Oct, 2008
1 commit
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
11 Sep, 2008
1 commit
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD