23 Jan, 2018
2 commits
-
This converts the following to Kconfig:
CONFIG_USB_MUSB_HCD
CONFIG_USB_MUSB_UDC
CONFIG_USB_DAVINCI
CONFIG_USB_OMAP3
CONFIG_USB_DA8XX
CONFIG_USB_AM35XSigned-off-by: Adam Ford
-
This converts the following to Kconfig:
CONFIG_USB_MUSB_OMAP2PLUS
CONFIG_USB_MUSB_AM35X
CONFIG_USB_MUSB_DSPS
CONFIG_USB_MUSB_PIO_ONLYSigned-off-by: Adam Ford
22 Jan, 2018
17 commits
-
The SPL doesn't have much room, so in order to support OF_CONTROL
in SPL, we need the extra functionality of SPL_OF_PLATDATA.Adding these features allows us to remove a small part of code without
losing the serial port during SPL.Signed-off-by: Adam Ford
-
Add qemu-x86_64 to the list of targets we use for test.py runs.
Signed-off-by: Tom Rini
-
Fix some style violations in fdtdec.c, and reduce the scope of some
variables.Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
Fix some whitespace-related style violations in fdtdec.c.
Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
Judging from its name and parameters, device_is_compatible looks like it
is compatible with a live device tree, but it actually isn't.Make it compatible with a live device tree.
Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
There are some whitespace-related style violations in read.c; fix those.
Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
There are some style violations in ofnode.c; fix those.
Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
The Makefile entries in the clk driver directory were not alphabetically
sorted. Correct this.Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
The clk uclass was converted to support a live device tree recently,
hence the global data pointer declarations are no longer needed.Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
Fix a mis-indented function call in clk_fixed_rate.c
Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
checkpatch.pl complains that the clk_ops structures used in clk-uclass.c
ought to be const, so we mark them as const.Reviewed-by: Simon Glass
Signed-off-by: Mario Six -
Sync with Linux commit 30a7acd573899fd8b("Linux 4.15-rc6")
to use enum pin_config_param.Signed-off-by: Peng Fan
Reviewed-by: Simon Glass -
get_maintainer.pl quotes names which it considers unsafe, i.e. anything
containing [^a-zA-Z0-9_ \-]. This confuses patman, it will duplicate
addresses which are also in Series-to/cc. Strip the quotes.Signed-off-by: Stefan Brüns
Reviewed-by: Simon Glass -
The function dev_read_addr calls ofnode_get_addr_index in the live tree
case, which does not apply bus translations to the address read from the
device tree. This results in illegal addresses on boards that rely on
bus translations being applied.Fix this situation by applying bus translations in the live tree case as
well.Signed-off-by: Mario Six
Tested-by: Stephen Warren -
%s/falback/fallback/g
Signed-off-by: Heinrich Schuchardt
Reviewed-by: Simon Glass
20 Jan, 2018
21 commits
-
Now the u-boot spi image is greater than 0x90000, increase the same in
env during spi erase.Signed-off-by: Faiz Abbas
Reviewed-by: Tom Rini -
A 2 line help entry for a new Kconfig entry is, at this time, sufficient
in some cases, so lets drop that warning for now.Signed-off-by: Tom Rini
-
The following config symbols are only defined once and never referenced
anywhere else:CONFIG_CYRUS
CONFIG_IDS8313
CONFIG_MPC8308_P1M
CONFIG_MPC8308RDB
CONFIG_MPC8349EMDS
CONFIG_MPC8349ITXGP
CONFIG_SBC8349
CONFIG_SBC8548
CONFIG_SBC8641D
CONFIG_TQM834X
CONFIG_VE8313
CONFIG_XPEDITE5140
CONFIG_XPEDITE5200
CONFIG_XPEDITE550XMost of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.Signed-off-by: Tuomas Tynkkynen
Acked-by: Mario Six -
Move system flags from defconfig to mach-stm32/Kconfig
Signed-off-by: Patrice Chotard
Reviewed-by: Vikas Manocha -
Now this driver is used across stm32f4, stm32f7 and stm32h7
SoCs family, give it a generic name.Signed-off-by: Patrice Chotard
Reviewed-by: Vikas Manocha -
The following config symbols are only defined once and never referenced
anywhere else:CONFIG_AMCORE
CONFIG_ASTRO5373L
CONFIG_M52277EVB
CONFIG_M5253DEMO
CONFIG_M5253EVBE
CONFIG_M5275EVB
CONFIG_M54418TWR
CONFIG_STMARK2Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.Signed-off-by: Tuomas Tynkkynen
-
Seems to be again one of those CONFIG_ symbols named after a board, with
nothing referencing it.Signed-off-by: Tuomas Tynkkynen
-
Last users of the following macros (for n = 0..7) were removed in
commit 5b8e76c35ec312a ("powerpc, 8xx: remove support for 8xx"):CONFIG_SYS_PCMCIA_PBRn
CONFIG_SYS_PCMCIA_PORnSigned-off-by: Tuomas Tynkkynen
-
The corresponding changes in the uboot-test-hooks repo are:
https://github.com/swarren/uboot-test-hooks/pull/15
Signed-off-by: Tuomas Tynkkynen
Reviewed-by: Tom Rini -
For preparation of adding AArch64 test.py jobs.
Signed-off-by: Tuomas Tynkkynen
Reviewed-by: Tom Rini -
It's mostly obvious, except that QEMU is annoying and requires an
explicit '-cpu cortex-a57' (or some other 64-bit core) to actually run
in 64-bit mode.While at it, remove the references to setting the ARCH environment
variable; that is not used in U-Boot.Signed-off-by: Tuomas Tynkkynen
Reviewed-by: Tom Rini -
This adds support for '-machine virt' on AArch64. This is rather simple:
we just add TARGET_QEMU_ARM_xxBIT to select a few different Kconfig
symbols, provide the ARMv8 memory map from the board file and add a new
defconfig based on the 32-bit defconfig.Signed-off-by: Tuomas Tynkkynen
Reviewed-by: Tom Rini -
The signing certificate name is always 15 chars long, but need not be
null terminated. One solution is then to use printf precision modifiers
to only print this many chars ("%.15s"), but tiny printf does not support
this, so lets just drop printing the cert name for now.Signed-off-by: Andrew F. Davis
-
Fix the size calculation in the verify boot. The header size
should be subtracted from the image size, not be assigned to
the image size.Fixes: 0830d72bb9f8 ("arm: am33xx: security: adds auth support for encrypted images")
Signed-off-by: Madan Srinivas
Signed-off-by: Dan Murphy
Signed-off-by: Andrew F. Davis
Reviewed-by: Lokesh Vutla -
CONFIG_OF_EMBED in particular is needed to allow the Raspberry Pi
firmware to pass the DTB to U-Boot and on to the kernel.Signed-off-by: Drew Moseley
-
This commit adds UBIFS_NAND to BOOT_TARGET_DEVICES. This will
allow the kernel zImage to be loaded from '/boot/zImage' in UBIFS
(ubi0:rootfs).Additionally update the *_MMC devices to also load kernel image from
the MMC 0:2 EXT4 file system.DISTRO_DEFAULTS Setup
=====================
[primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot
[fallback 1] Check MMC 0:2 /boot/zImage and run mmcbootz
[fallback 2] Check MMC 0:2 /boot/uImage and run mmcboot
[fallback 3] Check NAND UBIFS /boot/zImage and run nandbootubifs
[fallback 4] Check NAND partitions and run nandbootThe following "extlinux.conf" can be used to load images in the
top-level of the MMC 0:1 FAT partition.[MMC(0:1)/extlinux/extlinux.conf]
---8 -
initr_mem() is already enclosed by
#if defined(CONFIG_PRAM)
#endifSo there is no need to check CONFIG_PRAM again inside the
function.Signed-off-by: Heinrich Schuchardt
Reviewed-by: Simon Glass -
The command portion of the GPIO driver can only be used in full SPL so
re-work to guard the command related portions and mark it as static.Cc: Dan Murphy
Signed-off-by: Tom Rini -
The command portion of the GPIO driver can only be used in full SPL so
re-work to guard the command related portions and mark it as static.Cc: Bin Meng
Cc: Simon Glass
Cc: Philipp Tomsich
Signed-off-by: Tom Rini
Reviewed-by: Simon Glass