Eric Lee / smarc-uboot

16 Mar, 2016

1 commit

  • d96a98045   disk/part.c: Expose list of available block drivers ... Browse Code »

    We have a pretty nice and generic interface to ask for a specific block
    device. However, that one is still based around the magic notion that
    we know the driver name.

    In order to be able to write fully generic disk access code, expose the
    currently internal list to other source files so that they can scan through
    all available block drivers.

    Signed-off-by: Alexander Graf
    Reviewed-by: Simon Glass
    Tested-by: Simon Glass

    Alexander Graf
     

15 Mar, 2016

11 commits

20 Jan, 2016

1 commit

  • 99e7fc8a2   mmc: emmc and hw partitions partition table id bugfix. ... Browse Code »

    On bootup the emmc's hw partition is always set to 0 and the partition
    table is read from it. When switching to another hw partition the
    partition table's id is not updated but instead the old one from
    hw partition 0 is used. If there is no partition table on hw partition 0
    then the code will terminate and return error even if the desired hw
    partition contains a perfectly fine partition table. This fix updates
    the partition table struct to correspond to the specified hw partition
    before testing if the partition table is valid or not.

    Signed-off-by: Erik Tideman
    Reviewed-by: Tom Rini
    [trini: Squash the patch that corrected whitespace in the original into
    this one, wrap with HAVE_BLOCK_DEVICE test]
    Signed-off-by: Tom Rini

    Erik Tideman
     

15 Jan, 2016

1 commit

14 Jan, 2016

2 commits

24 Nov, 2015

2 commits

  • cfdaf4caa   part:efi: add bootable parameter in gpt command ... Browse Code »

    The optional parameter bootable is added in gpt command to set the
    partition attribute flag "Legacy BIOS bootable"

    This flag is used in extlinux and so in with distro to select
    the boot partition where is located the configuration file
    (please check out doc/README.distro for details).

    With this parameter, U-Boot can be used to create the boot partition
    needed for device using distro.

    example of use:

    setenv partitions "name=u-boot,size=60MiB;name=boot,size=60Mib,bootable;\
    name=rootfs,size=0"

    > gpt write mmc 0 $partitions

    > part list mmc 0

    Partition Map for MMC device 0 -- Partition Type: EFI

    Part Start LBA End LBA Name
    Attributes
    Type GUID
    Partition GUID
    1 0x00000022 0x0001e021 "u-boot"
    attrs: 0x0000000000000000
    type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    guid: cceb0b18-39cb-d547-9db7-03b405fa77d4
    2 0x0001e022 0x0003c021 "boot"
    attrs: 0x0000000000000004
    type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    guid: d4981a2b-0478-544e-9607-7fd3c651068d
    3 0x0003c022 0x003a9fde "rootfs"
    attrs: 0x0000000000000000
    type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    guid: 6d6c9a36-e919-264d-a9ee-bd00379686c7

    > part list mmc 0 -bootable devplist

    > printenv devplist

    devplist=2

    Then the distro scripts will search extlinux in partition 2
    and not in the first partition.

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     
  • cef68bf90   gpt: part: Definition and declaration of GPT verification functions ... Browse Code »
    12

    This commit provides definition and declaration of GPT verification
    functions - namely gpt_verify_headers() and gpt_verify_partitions().
    The former is used to only check CRC32 of GPT's header and PTEs.
    The latter examines each partition entry and compare attributes such as:
    name, start offset and size with ones provided at '$partitions' env
    variable.

    Signed-off-by: Lukasz Majewski
    Reviewed-by: Tom Rini
    Reviewed-by: Przemyslaw Marczak

    Lukasz Majewski
     

13 Nov, 2015

2 commits

  • bcb41dcae   uuid: add selection by string for known partition type GUID ... Browse Code »

    short strings can be used in type parameter of gpt command
    to replace the guid string for the types known by u-boot

    partitions = name=boot,size=0x6bc00,type=data; \
    name=root,size=0x7538ba00,type=linux;
    gpt write mmc 0 $partitions

    and they are also used to display the type of partition
    in "part list" command

    Partition Map for MMC device 0 -- Partition Type: EFI

    Part Start LBA End LBA Name
    Attributes
    Type GUID
    Partition GUID
    1 0x00000022 0x0000037f "boot"
    attrs: 0x0000000000000000
    type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    type: data
    guid: d117f98e-6f2c-d04b-a5b2-331a19f91cb2
    2 0x00000380 0x003a9fdc "root"
    attrs: 0x0000000000000000
    type: 0fc63daf-8483-4772-8e79-3d69d8477de4
    type: linux
    guid: 25718777-d0ad-7443-9e60-02cb591c9737

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     
  • 7561b258a   gpt: add optional parameter type in gpt command ... Browse Code »

    code under flag CONFIG_PARTITION_TYPE_GUID
    add parameter "type" to select partition type guid

    example of use with gpt command :

    partitions = uuid_disk=${uuid_gpt_disk}; \
    name=boot,size=0x6bc00,uuid=${uuid_gpt_boot}; \
    name=root,size=0x7538ba00,uuid=${uuid_gpt_root}, \
    type=0fc63daf-8483-4772-8e79-3d69d8477de4;

    gpt write mmc 0 $partitions

    Signed-off-by: Patrick Delaunay

    Patrick Delaunay
     

25 Oct, 2015

2 commits

12 Sep, 2015

1 commit

09 Jan, 2015

1 commit

  • b349abbfe   gpt: Fix the protective MBR partition size ... Browse Code »

    According to the UEFI Spec (Table 16, section 5.2.3 of the version 2.4 Errata
    B), the protective MBR partition record size must be set to the size of the
    disk minus one, in LBAs.

    However, the current code was setting the size as the total number of LBAs on
    the disk, resulting in an off-by-one error.

    This confused the AM335x ROM code, and will probably confuse other tools as
    well.

    Signed-off-by: Maxime Ripard

    Maxime Ripard
     

18 Dec, 2014

2 commits

27 Nov, 2014

1 commit

25 Oct, 2014

1 commit

25 Sep, 2014

1 commit

22 Jul, 2014

1 commit

24 Jun, 2014

1 commit

  • 4d907025d   sandbox: restore ability to access host fs through standard commands ... Browse Code »

    Commit 95fac6ab4589 "sandbox: Use os functions to read host device tree"
    removed the ability for get_device_and_partition() to handle the "host"
    device type, and redirect accesses to it to the host filesystem. This
    broke some unit tests that use this feature. So, revert that change. The
    code added back by this patch is slightly different to pacify checkpatch.

    However, we're then left with "host" being both:
    - A pseudo device that accesses the hosts real filesystem.
    - An emulated block device, which accesses "sectors" inside a file stored
    on the host.

    In order to resolve this discrepancy, rename the pseudo device from host
    to hostfs, and adjust the unit-tests for this change.

    The "help sb" output is modified to reflect this rename, and state where
    the host and hostfs devices should be used.

    Signed-off-by: Stephen Warren
    Tested-by: Josh Wu
    Acked-by: Simon Glass
    Tested-by: Simon Glass

    Stephen Warren
     

12 Jun, 2014

2 commits

  • ecdd57e27   disk: default to HW partition 0 if not specified ... Browse Code »

    Currently, get_device()/get_dev_hwpart() for MMC devices does not select
    an explicit HW partition unless the user explicitly requests one, i.e. by
    requesting device "mmc 0.0" rather than just "mmc 0". I think it makes
    more sense if the default is to select HW partition 0 (main data area)
    if the user didn't request a specific partition. Otherwise, the following
    happens, which feels wrong:

    Select HW partition 1 (boot0):
    mmc dev 0 1

    Attempts to access SW partition 1 on HW partition 1 (boot0), rather than
    SW partition 1 on HW partition 0 (main data area):
    ls mmc 0:1 /

    With this patch, the second command above re-selects the main data area.

    Many device types don't support HW partitions at all, so if HW partition
    0 is selected (either explicitly or as the default) and there's no
    select_hwpart function, we simply skip attempting to select a HW
    partition.

    Some MMC devices (i.e. SD cards) don't support HW partitions. However,
    this patch still works, since mmc_start_init() sets the current
    partition number to 0, and mmc_select_hwpart() succeeds if the requested
    partition is already selected.

    Signed-off-by: Stephen Warren
    Acked-by: Pantelis Antoniou

    Stephen Warren
     
  • 4a36be9bd   disk: part_dos.c: Add a PBR check when MBR checking fails ... Browse Code »

    Bug: SDCard with a messed up partition but still has a FAT signature
    intact is readable in Linux but unreadable in uboot with 'fatls'.

    Fix: When partition info checking fails, there is no checking for a
    FAT signature (DOS_PBR) which will fail 'fatls'. FAT signature checking
    is done when no valid partition is found in partition table. If FAT
    signature is found, the disk will be read as PBR and continue
    processing.

    Signed-off-by: Darwin Dingel

    Darwin Dingel
     

06 Jun, 2014

3 commits

23 May, 2014

2 commits

  • d23562843   mmc: provide a select_hwpart implementation for get_device() ... Browse Code »

    This enables specifying which eMMC HW partition to target for any U-Boot
    command that uses the generic get_partition() function to parse its
    command-line arguments.

    Acked-by: Pantelis Antoniou
    Signed-off-by: Stephen Warren

    Stephen Warren
     
  • 336b6f904   disk: support devices with HW partitions ... Browse Code »

    Some device types (e.g. eMMC) have hardware-level partitions (for eMMC,
    separate boot and user data partitions). This change allows the user to
    specify the HW partition they wish to access when passing a device ID to
    U-Boot Commands such as part, ls, load, ums, etc.

    The syntax allows an optional ".$hwpartid" to be appended to the device
    name string for those commands.

    Existing syntax, for MMC device 0, default HW partition ID, SW partition
    ID 1:

    ls mmc 0:1 /

    New syntax, for MMC device 0, HW partition ID 1 (boot0), SW partition
    ID 2:

    ls mmc 0.1:2 /

    For my purposes, this is most useful for the ums (USB mass storage
    gadget) command, but there's no reason not to allow the new syntax
    globally.

    This patch adds the core support infra-structure. The next patch will
    provide the implementation for MMC.

    Acked-by: Pantelis Antoniou
    Signed-off-by: Stephen Warren

    Stephen Warren
     

13 May, 2014

1 commit

03 Apr, 2014

1 commit

  • d718ded05   lib: uuid: code refactor for proper maintain between uuid bin and string ... Browse Code »

    Changes in lib/uuid.c to:
    - uuid_str_to_bin()
    - uuid_bin_to_str()

    New parameter is added to specify input/output string format in listed functions
    This change allows easy recognize which UUID type is or should be stored in given
    string array. Binary data of UUID and GUID is always stored in big endian, only
    string representations are different as follows.

    String byte: 0 36
    String char: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    string UUID: be be be be be
    string GUID: le le le be be

    This patch also updates functions calls and declarations in a whole code.

    Signed-off-by: Przemyslaw Marczak
    Cc: Stephen Warren
    Cc: Lukasz Majewski
    Cc: trini@ti.com

    Przemyslaw Marczak