01 Jun, 2017
30 commits
-
This function does not change the device tree so adjust it to use const
for this parameter.Signed-off-by: Simon Glass
-
Add functions to access addresses in the device tree. These are brought
in from Linux 4.10.Also fix up the header guard for fdtaddr.h to avoid confusion.
Signed-off-by: Simon Glass
-
Since U-Boot supports both a live tree and a flat tree, we need an easy
way to access the tree without worrying about which is currently active.
To support this, U-Boot has the concept of an ofnode, which can refer
either to a live tree node or a flat tree node.For the live tree, the reference contains a pointer to the node (struct
device_node *) or NULL if the node is invalid. For the flat tree, the
reference contains the node offset or -1 if the node is invalid.Add a basic set of operations using ofnodes. These are implemented by
using either libfdt functions (in the case of a flat DT reference) or
the live-tree of_...() functions.Note that it is not possible to have both live and flat references active
at the same time. As soon as the live tree is available, everything in
U-Boot should switch to using that. This avoids confusion and allows us to
assume that the type of a reference is simply based on whether we have a
live tree yet, or not.Signed-off-by: Simon Glass
-
The of_ prefix conflicts with the livetree version of this function.
Rename it to avoid problems when we add livetree support.Signed-off-by: Simon Glass
-
If enabled, build a live device tree after relocation. This can then be
used by driver model.Signed-off-by: Simon Glass
-
This function converts the flat device tree into a hierarchical one with
C structures and pointers. This is easier to access.Signed-off-by: Simon Glass
-
Add a basic assortment of functions to access the live device tree. These
come from Linux v4.9 and are modified for U-Boot to the minimum extent
possible. While these functions are now very stable in Linux, it will be
possible to merge in fixes if needed.Signed-off-by: Simon Glass
-
Add a Kconfig option to enable a live device tree, built at run time from
the flat tree. Also add structure definitions and a root node.Signed-off-by: Simon Glass
-
In linux v4.9 this returns a value. This saves checking the warning
condition twice in some code.Update the U-Boot version to do this also.
Signed-off-by: Simon Glass
-
Adjust the order to make it clear that *devp is set to NULL by default.
Signed-off-by: Simon Glass
-
Enable CONFIG_DM_MMC_OPS and CONFIG_BLK for all Tegra devices. This moves
Tegra to use driver model fully for MMC.Signed-off-by: Simon Glass
-
This function is called when the MMC block device is being probed. There
is a recursive call in this function since find_mmc_device() itself can
cause the MMC device to be probed.Admittedly the MMC device should already be probed, since we would not be
probing its child otherwise, but the current code is unnecessarily
convoluted.Rewrite this to access the MMC structure directly.
Signed-off-by: Simon Glass
-
When binding a new MMC device, make sure that it has the required
operations. Since for now we still support *not* having the operations
(with CONFIG_DM_MMC_OPS not enabled) it makes sense to add this check.Signed-off-by: Simon Glass
-
The intention with block devices is that the device number (devnum field
in its descriptor) matches the alias of its parent device. For example,
with:aliases {
mmc0 = "/sdhci@700b0600";
mmc1 = "/sdhci@700b0400";
}we expect that the block devices for mmc0 and mmc1 would have device
numbers of 0 and 1 respectively.Unfortunately this does not currently always happen. If there is another
MMC device earlier in the driver model data structures its block device
will be created first. It will therefore get device number 0 and mmc0
will therefore miss out. In this case the MMC device will have sequence
number 0 but its block device will not.To avoid this, allow a device to request a device number and bump any
existing device number that is using it. This all happens during the
binding phase so it is safe to change these numbers around. This allows
device numbers to match the aliases in all circumstances.Add a test to verify the behaviour.
Signed-off-by: Simon Glass
-
At present this code is inline. Move it into a function to allow it to
be used elsewhere.Signed-off-by: Simon Glass
-
Sometimes it is useful to be able to find a block device without also
probing it. Add a function for this as well as the associated test.Signed-off-by: Simon Glass
-
With driver model MMC is probed automatically when needed. We should not
re-init MMC each time.Signed-off-by: Simon Glass
-
We should not call out to board code from drivers. With driver model,
mmc_power_init() already has code to use a named regulator, but the
legacy code path remains. Update the code to make this clear.Signed-off-by: Simon Glass
-
This core function will need to work with a live tree also. Update it to
accept an ofnode instead of an offset.Signed-off-by: Simon Glass
-
With live tree we need a struct device_node * to reference a node. With
the existing flat tree, we need an int offset. We need to unify these into
a single value which can represent both.Add an ofnode union for this and adjust existing code to move to this.
Signed-off-by: Simon Glass
-
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.Signed-off-by: Simon Glass
-
This function is only used in one place. It is better to just declare it
internally since there is a simpler replacement for use outside the
driver-model core code.Signed-off-by: Simon Glass
-
It is good practice to include common.h as the first header. This ensures
that required features like the DECLARE_GLOBAL_DATA_PTR macro,
configuration options and common types are available.Fix up some files which currently don't do this. This is necessary because
driver model will soon start using global data and configuration in the
dm/read.h header file, included via dm.h. The gd->fdt_blob value will be
used to access the device tree and CONFIG options will be used to
determine whether to support inline functions in the header file.Signed-off-by: Simon Glass
-
This function should not be used outside the core driver-model code.
Update it to use dm_scan_fdt_dev() instead.Signed-off-by: Simon Glass
-
These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.In the end we will have:
1. dev_read_addr...() - works on devices, supports flat/live tree
2. devfdt_get_addr...() - current functions, flat tree only
3. of_get_address() etc. - new functions, live tree onlyAll drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.Note this involves changing some dead code - the imx_lpi2c.c file.
Signed-off-by: Simon Glass
-
Move this group of address-related functions into a new file. These use
the flat device tree. Future work will provide new versions of these which
can support the live tree.Signed-off-by: Simon Glass
-
This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
presentSigned-off-by: Simon Glass
-
Please pull another update for Broadcom MIPS.
This contains new SoC's, new boards and new drivers and some bugfixes. -
Mostly including the Armada 37xx pinctrl / gpio driver.
-
Currently these (board agnostic) commands cannot be selected using
menuconfig and friends. Fix this the obvious way. As part of this,
don't muddle the meaning of CONFIG_HASH_VERIFY to mean both 'hash -v'
and "we have a hashing command" as this makes the Kconfig logic odd.Signed-off-by: Daniel Thompson
[trini: Re-apply, add imply for a few cases, run moveconfig.py, also
migrate CRC32_VERIFY]
Signed-off-by: Tom Rini
31 May, 2017
10 commits
-
Instead of having a peripheral clock of 50 MHz like the BCM63xx family, it
has a 48 MHz clock.
This fixes uart baud rate calculation for BCM3380.Signed-off-by: Álvaro Fernández Rojas
-
Now that the uart driver has been fixed we support more baud rates.
Signed-off-by: Álvaro Fernández Rojas
-
It's currently bugged and doesn't work for even cases.
Right shift bits instead of dividing and fix even cases.Signed-off-by: Álvaro Fernández Rojas
-
I missed this when I added support for BMIPS UART driver and it's needed to
achieve a real 115200 8N1 setup.Signed-off-by: Álvaro Fernández Rojas
-
Signed-off-by: Álvaro Fernández Rojas
Reviewed-by: Simon Glass -
Signed-off-by: Álvaro Fernández Rojas
Reviewed-by: Simon Glass -
Signed-off-by: Álvaro Fernández Rojas
Reviewed-by: Simon Glass -
BCM6338 has a fixed CPU frequency of 240 MHz.
Signed-off-by: Álvaro Fernández Rojas
Reviewed-by: Simon Glass -
Signed-off-by: Álvaro Fernández Rojas
Reviewed-by: Simon Glass -
Signed-off-by: Álvaro Fernández Rojas
Reviewed-by: Simon Glass
