01 Nov, 2013
1 commit
-
Signed-off-by: Masahiro Yamada
Cc: Albert ARIBAUD
Cc: Andreas Bießmann
Cc: Stefano Babic
Cc: Prafulla Wadaskar
Cc: Minkyu Kang
Cc: Vipin Kumar
Cc: Tom Warren
Cc: Tom Rini
21 Oct, 2013
2 commits
-
This paramter will later be used to initialize OTG ports in
host or device mode.Signed-off-by: Troy Kisky
-
This commit unifies board-specific USB initialization implementations
under one symbol (usb_board_init), declaration of which is available in
usb.h.New API allows selective initialization of USB controllers whenever needed.
Signed-off-by: Mateusz Zalega
Signed-off-by: Kyungmin Park
Reviewed-by: Lukasz Majewski
Cc: Marek Vasut
Cc: Lukasz Majewski
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
10 Jun, 2013
1 commit
-
To be consistent with other ARM platforms,
renaming asm/arch-omap*/clocks.h to asm/arch-omap*/clock.hSigned-off-by: Lokesh Vutla
09 Mar, 2013
3 commits
-
Currently, omap3_dss_panel_config() sets gfx_format to a value that is hardcoded
in the code. This forces anyone who wants to use a different gfx_format to make
adjustments after calling omap3_dss_panel_config(). This could be avoided if the
value of gfx_format were parameterized as input for omap3_dss_panel_config().Make gfx_format a field in struct panel_config, and update existing structs to
set this field to the value that was originally hard coded.Cc: Wolfgang Denk
Cc: Jeroen Hofstee
Cc: Tom Rini
Cc: Anatolij Gustschin
Signed-off-by: Nikita Kiryanov
Signed-off-by: Igor Grinberg -
Add check for write protection in omap mmc driver.
Signed-off-by: Nikita Kiryanov
Signed-off-by: Igor Grinberg
Reviewed-by: Tom Rini -
Implement driver check for card detection.
Signed-off-by: Nikita Kiryanov
Signed-off-by: Igor Grinberg
26 Oct, 2012
3 commits
-
Add video support to the board with the display
focaltech etm070003dh6.Signed-off-by: Stefano Babic
-
Some GPIOs differ in the new revision board.
Previous revision are considered obsolete and
they will not anymore supported.Signed-off-by: Stefano Babic
-
The mcx board was slightly modified and the pinmux must be updated.
There is no need to support the old board, that becomes obsolete.Signed-off-by: Stefano Babic
16 Oct, 2012
1 commit
-
Kill off ehci-core.h
It was used to specify some static controller data. To support more than
one controller being active at any time we have to carry the controller
data ourselfes. Change the ehci interface accordingly.NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed
to do the same thing as other platforms. But the change for now is at least
compile clean.Signed-off-by: Lucas Stach
Reviewed-by: Marek Vasut
01 Sep, 2012
2 commits
-
Detect hot-water-button to start a differnt image.
Signed-off-by: Stefano Babic
CC: Tom Rini -
Signed-off-by: Stefano Babic
CC: Tom Rini
15 May, 2012
2 commits
-
Introduce a __weak misc_init_r function that just runs dieid_num_r().
Remove misc_init_r from cm_t35, mcx, omap3_logic and mt_ventoux as this was
all they did for misc_init_r.Cc: Igor Grinberg
Cc: Ilya Yanok
Cc: Peter Barada
Cc: Stefano Babic
Signed-off-by: Tom Rini
Acked-by: Igor Grinberg -
Add parameters to the OMAP MMC initialization function so the board can
mask host capabilities and set the maximum clock frequency. While the
OMAP supports a certain set of MMC host capabilities, individual boards
may be more restricted and the OMAP may need to be configured to match
the board. The PRG_SDMMC1_SPEEDCTRL bit in the OMAP3 is an example.Signed-off-by: Jonathan Solnit
12 Feb, 2012
1 commit
-
This patch adds support for the HTKW mcx AM3517-based board.
Serial, Ethernet, NAND, MMC, RTC, EHCI USB host and both
NAND and MMC SPLs are supported.Signed-off-by: Ilya Yanok
Signed-off-by: Stefano Babic
CC: Tom Rini
Cc: Detlev Zundel
Acked-by: Igor Grinberg
