Eric Lee / smarc-uboot

20 Feb, 2020

1 commit

30 Jan, 2020

1 commit

23 Jan, 2020

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

12 Nov, 2019

1 commit

10 Nov, 2019

2 commits

  • 006ab58d4   rockchip: rk3399: update SPL_STACK_R_ADDR ... Browse Code »

    Use the same SPL_STACK_R_ADDR in Kconfig instead of each board config;
    default to 0x4000000(64MB) instead of 0x80000(512KB) for this address
    can support all the SoCs including those may have only 64MB memory, and
    also reserve enough space for atf, kernel(in falcon mode) loading.

    After the ATF entry move to 0x40000, the stack from 0x80000 may be override
    when loading ATF bl31.

    Signed-off-by: Kever Yang

    Kever Yang
     
  • 5ce94c74a   rockchip: rk3399: defconfig: no need to reserve IRAM for SPL ... Browse Code »

    We use to reserve IRAM to avoid the SPL text overlap with ATF M0 code,
    and when we introduce the TPL, the SPL space is in DRAM, we reserve
    space to avoid SPL text overlap with ATF bl31.

    Now we decide to move ATF entry point to 0x40000 instead of 0x1000,
    so that the SPL can have 0x4000 as code size and no need to reserve
    space or relocate before loading ATF.

    The mainline ATF has update since:
    0aad563c rockchip: Update BL31_BASE to 0x40000

    Signed-off-by: Kever Yang

    Kever Yang
     

08 Nov, 2019

1 commit

23 Aug, 2019

1 commit

14 Aug, 2019

1 commit

20 Jul, 2019

2 commits

30 May, 2019

1 commit

27 May, 2019

1 commit

08 May, 2019

3 commits

  • 2666bd42c   arm: rockchip: rk3399: Move common configs in Kconfig ... Browse Code »

    Few SPL and U-Boot proper configs are common to all rk3399 target
    defconfigs, move them and select it from platform kconfig.

    Moved configs:
    - SPL_ATF
    - SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
    - SPL_LOAD_FIT
    - SPL_CLK if SPL
    - SPL_PINCTRL if SPL
    - SPL_RAM if SPL
    - SPL_REGMAP if SPL
    - SPL_SYSCON if SPL
    - CLK
    - FIT
    - PINCTRL
    - RAM
    - REGMAP
    - SYSCON
    - DM_PMIC
    - DM_REGULATOR_FIXED

    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 695dca9a4   Kconfig: Add default SPL_FIT_GENERATOR for rockchip ... Browse Code »

    Add default SPL_FIT_GENERATOR py script for rockchip platforms if
    specific target enabled SPL_LOAD_FIT.

    So, this would help get rid of explicitly mentioning the default
    SPL FIT generator in defconfigs. however some targets, like puma_rk3399
    still require their own FIT generator so in those cases the default will
    override with defconfig defined generator.

    Reviewed-by: Paul Kocialkowski
    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     
  • 0d31044eb   rockchip: rk3399: orangepi: Add SPL_TEXT_BASE ... Browse Code »

    CONFIG_SPL_TEXT_BASE was available in configs/rk3399_common.h
    when the OrangePI rk3399 board supported during first
    version patch.

    But, later below change which move this config into Kconfig and
    same has been merged in mainline tree.
    "configs: move CONFIG_SPL_TEXT_BASE to Kconfig"
    (sha1: f89d6133eef2e068f9c33853b6584d7fcbfa9d2e)

    Unfortunately, the maintainer applied the initial version patch,
    instead of looking for next version changes.

    Fix it by adding SPL_TEXT_BASE in orangepi-rk3399 defconfig.

    Signed-off-by: Jagan Teki
    Reviewed-by: Kever Yang

    Jagan Teki
     

01 May, 2019

1 commit

  • ed9c9059f   rockchip: rk3399: Add Orangepi RK3399 support ... Browse Code »

    Add initial support for Orangepi RK3399 board.

    Specification
    - Rockchip RK3399
    - 2GB/4GB DDR3
    - 16GB eMMC
    - SD card slot
    - RTL8211E 1Gbps
    - AP6356S WiFI/BT
    - HDMI In/Out, DP, MIPI DSI/CSI
    - Mini PCIe
    - Sensors, Keys etc
    - DC12V-2A and DC5V-2A

    Commit details about Linux DTS sync:
    "arm64: dts: rockchip: Add support for the Orange Pi RK3399"
    (sha1: d3e71487a790979057c0fdbf32f85033639c16e6)

    Signed-off-by: Jagan Teki
    Reviewed-by: Philipp Tomsich

    Jagan Teki