Eric Lee / smarc-uboot

07 Feb, 2020

1 commit

  • 8a6ffeda9   video: enable VIDEO_ANSI and all VIDEO_BBP options ... Browse Code »

    This partially reverts changes by commit 2cc393f32fd9
    ("video: make BPP and ANSI configs optional") since it
    caused issues with other boards (missing LCD console
    output on pinebook, x86 platform or sandbox). Enable
    all disabled options again and opt out of not supported
    color depth in board defconfigs.

    Signed-off-by: Anatolij Gustschin
    Reported-by: Vagrant Cascadian

    Anatolij Gustschin
     

06 Dec, 2019

1 commit

  • 2cc393f32   video: make BPP and ANSI configs optional ... Browse Code »
    12

    Many boards do not use all selected framebuffer depth
    configurations, for such boards there is some unused
    code in video and console uclass routines. Make depth
    specific code optional to avoid dead code and slightly
    reduce binary size. Also make ANSI code optional for
    the same reason. When i.e. using only VIDEO_BPP16 the
    code size shrinks (below values when using gcc-7.3.0):

    $ ./tools/buildman/buildman -b video-wip -sS wandboard
    ...
    01: Merge git://git.denx.de/u-boot-sh
    02: video: add guards around 16bpp/32bbp code
    03: video: make BPP and ANSI configs optional
    arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0

    Signed-off-by: Anatolij Gustschin
    Tested-by: Eugen Hristev
    Tested-by: Patrice Chotard
    Tested-by: Steffen Dirkwinkel

    Anatolij Gustschin
     

05 Dec, 2019

1 commit

23 Nov, 2019

1 commit

  • b7cdecfc1   efi_loader: default EFI_LOADER=n on ARM11 ... Browse Code »

    Some of the ARM11 boards have tight limits on the size of U-Boots. Hence
    use EFI_LOADER=n as default on ARM11.

    Set EFI_LOADER=y for the Raspberry Pi and Raspberry Pi Zero as these boards
    have sufficient storage on the SD card.

    Suggested-by: Tom Rini
    Signed-off-by: Heinrich Schuchardt

    Heinrich Schuchardt
     

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

26 Aug, 2019

1 commit

02 Aug, 2019

1 commit

  • 37304aaf6   Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig ... Browse Code »
    4

    This converts the following to Kconfig:
    CONFIG_USE_PREBOOT
    CONFIG_PREBOOT

    Both are together in one commit, since otherwise the former causes kconfig
    to define the latter, which gives duplicate symbol errors.

    Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
    backslash lands in the wrong place. Similarly with socfpga_vining_fpga.

    Signed-off-by: Simon Glass

    Simon Glass
     

30 Apr, 2019

1 commit

08 Jan, 2019

1 commit

03 Dec, 2018

1 commit

  • 11e10bfce   ARM: rpi_*_defconfig: Add support to find UUID for filesystem ... Browse Code »

    The most generic way of having a stable boot behavior is to rely on
    UUID instead of device names for root partition, so the order of
    probing does not cause issues with booting.

    This enables the `CMD_FS_UUID` for following defconfig files:

    - rpi_0_w_defconfig
    - rpi_2_defconfig
    - rpi_3_32b_defconfig
    - rpi_3_defconfig
    - rpi_defconfig

    Signed-off-by: Otavio Salvador
    Signed-off-by: Fabio Berton
    Signed-off-by: Alexander Graf

    Otavio Salvador
     

04 Sep, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

09 Apr, 2018

1 commit

08 Apr, 2018

1 commit

05 Apr, 2018

1 commit

  • 065dcacf3   rpi: Allow to boot without serial ... Browse Code »

    When we enable CONFIG_OF_BOARD on Raspberry Pis, we may end up without
    serial console support in early boot. Hence we need to make the serial
    port optional, otherwise we will never get to the point where serial
    would be probed.

    Signed-off-by: Alexander Graf

    Alexander Graf
     

11 Feb, 2018

2 commits

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

29 Jan, 2018

1 commit

  • caf2233b2   bcm283x: Add pinctrl driver ... Browse Code »
    40

    The bcm283x family of SoCs have a GPIO controller that also acts as
    pinctrl controller.

    This patch introduces a new pinctrl driver that can actually properly mux
    devices into their device tree defined pin states and is now the primary
    owner of the gpio device. The previous GPIO driver gets moved into a
    subdevice of the pinctrl driver, bound to the same OF node.

    That way whenever a device asks for pinctrl support, it gets it
    automatically from the pinctrl driver and GPIO support is still available
    in the normal command line phase.

    Signed-off-by: Alexander Graf

    Alexander Graf
     

20 Jan, 2018

1 commit

19 Dec, 2017

1 commit

04 Dec, 2017

1 commit