23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
05 Dec, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
21 Nov, 2019
1 commit
-
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
08 Oct, 2019
1 commit
-
All boards are using the same prompt that's why add it as default value to
Kconfig to simplify defconfigs.Signed-off-by: Michal Simek
02 Aug, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_USE_PREBOOT
CONFIG_PREBOOTBoth are together in one commit, since otherwise the former causes kconfig
to define the latter, which gives duplicate symbol errors.Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
backslash lands in the wrong place. Similarly with socfpga_vining_fpga.Signed-off-by: Simon Glass
12 Jul, 2019
1 commit
-
The name CONFIG_LEGACY_IMAGE_FORMAT reads slightly better along with
allowing us to avoid a rather nasty Kbuild/Kconfig issue down the line
with CONFIG_IS_ENABLED(IMAGE_FORMAT_LEGACY). In a few places outside of
cmd/ switch to using CONFIG_IS_ENABLED() to test what is set.Signed-off-by: Tom Rini
15 Jun, 2019
1 commit
-
In order to migrate this symbol to Kconfig introduce a new symbol to
guard it, CONFIG_SYS_CUSTOM_LDSCRIPT. When that is set we can then
provide the exact final location o the script.Signed-off-by: Tom Rini
27 May, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
18 May, 2019
1 commit
-
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.Acked-by: Alexey Brodkin
Signed-off-by: Trevor Woerner
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini
30 Apr, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
14 Feb, 2019
2 commits
-
Boards have only one controller enabled that's why move to DM_I2C is
easy.
Add also i2c alias for not to be shown as i2c bus -1 because alias
doesn't exist.
Config file points to MAC stored in eeprom but it is not listed that's
why I have added 24c08 part.Signed-off-by: Michal Simek
Reviewed-by: Heiko Schocher -
This patch is doing two things.
1. Exchanging order of boot commands. distro_bootcmd is run first
followed by Xilinx boot command.
2. Remove CONFIG_BOOTCOMMAND from configs (and follow mainline) by
creating Xilinx distribution bootcommand and wiring it as the last
bootcommand.QSPI, NAND distribution boot command will be added later.
Signed-off-by: Michal Simek
24 Jan, 2019
1 commit
-
Build warning was added by:
"fdt: Add warning about CONFIG_OF_EMBED"
(sha1: 841d5fbae4e993476fa87d8933db0cd58d3c2d41)Zynq mini configurations are not moved yet and it is questionable if
make sense to move them too.Signed-off-by: Michal Simek
08 Jan, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
18 Aug, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMACSigned-off-by: Adam Ford
Acked-by: Jagan Teki
Acked-by: Joe Hershberger
04 Jun, 2018
1 commit
-
CONFIG_DEBUG_UART_BASE and CONFIG_DEBUG_UART_CLOCK have changed that's
why this sync.Signed-off-by: Michal Simek
11 May, 2018
1 commit
-
Now that showing silicon version is part of the CPU
info display, let's remove checkboard().Note that the generic show_board_info() will still
show the DT 'model' property. For instance:U-Boot 2018.05-rc2-00025-g611b3ee0159b (Apr 19 2018 - 11:23:12 +0200)
CPU: Zynq 7z045
Silicon: v1.0
Model: Zynq ZC706 Development Board
I2C: readyBased on patches from Ariel D'Alessandro ,
and Ezequiel Garciamini configuration doesn't need to show this information.
Signed-off-by: Michal Simek
28 Apr, 2018
1 commit
-
This converts IMAGE_FORMAT_LEGACY to Kconfig
Signed-off-by: Alex Kiernan
Reviewed-by: Tom Rini
23 Mar, 2018
1 commit
-
Make defconfigs up2date with current location.
Signed-off-by: Michal Simek
01 Mar, 2018
4 commits
-
This patch added Kconfig support for CONFIG_ZYNQ_I2C0 and
CONFIG_ZYNQ_I2C1 and enabled it in respective defconfig.Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek -
This patch added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET
and enabled it in respective defconfig.Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek -
This patch enabled CONFIG_SYS_I2C_ZYNQ in the respective
defconfig.Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek -
This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the
values over to the defconfigs.Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
02 Feb, 2018
1 commit
-
This commit moves USB_FUNCTION_THOR config to Kconfig.
Signed-off-by: Lukasz Majewski
Acked-by: Michal Simek
Reviewed-by: Jaehoon Chung
30 Jan, 2018
4 commits
-
This patch moved ethernet PHY configs of Zynq boards
to respective defconfig.Signed-off-by: Vipul Kumar
Signed-off-by: Michal Simek -
BOOTCOMMAND is composed with distro_bootcmd but this variable is not
present. Enabling distro defaults setting is fixing it.Signed-off-by: Michal Simek
-
It will cleanup generic config and enable option to change it for every
board.Signed-off-by: Michal Simek
-
There are two reasons for doing this change.
There is still !DM driver for xilinx soft gpio IP and especially it is
saving some space for memory constrained boards like cse (almost ~400B).Signed-off-by: Michal Simek
15 Dec, 2017
1 commit
-
This patch is fixing two issues:
1. Insufficient stack size for fat fs buffers
2. Insufficient space in malloc areaTested on zc702 and zc706.
Signed-off-by: Michal Simek
28 Nov, 2017
3 commits
-
Move cadence/zynq serial driver via Kconfig
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass -
Enabling fpga via Kconfig.
Signed-off-by: Michal Simek
-
Add the Zynq-based SYZYGY Hub board from Opal Kelly. The board
contains a Xilinx Zynq xc7z012s SoC, 1GB DDR3 RAM, and supports
booting from SD.Signed-off-by: Tom McLeod
Cc: Michal Simek
CC: Albert Aribaud
Signed-off-by: Michal Simek