25 Jan, 2014
1 commit
-
Signed-off-by: Tom Rini
20 Apr, 2013
2 commits
-
With 'mtest' no longer a default command, we will have unused defines
which should be removed for the v2013.10 release.Signed-off-by: Tom Rini
-
As per doc/feature-removal-schedule.txt, remove CONFIG_CMD_MEMTEST from
default list of commands.Signed-off-by: Tom Rini
12 Apr, 2013
1 commit
-
This reverts commit 1285a2808a254f3d1a809c1a541f0c0f746e03d7 since the migration
of boards from Makefile to boards.cfg is now complete.Signed-off-by: Benoît Thébaudeau
08 Apr, 2013
1 commit
-
We shall remove these OMAP4/5-specific options in v2013.07, barring
insufficient progress on the kernel side.Cc: Sricharan R
Signed-off-by: Tom Rini
12 Mar, 2013
1 commit
-
The "mtest" command is of little practical use (if any), and
experience has shown that a large number of board configurations
define useless or even dangerous start and end addresses. If not even
the board maintainers are able to figure out which memory range can be
reliably tested, how can we expect such from the end users? As this
problem comes up repeatedly, we rather do not enable this command by
default, so only people who know what they are doing will be
confronted with it.As this changes the user interface, we allow for a grace period
before this change takes effect. For now, we make "mtest"
configurable through the CONFIG_CMD_MEMTEST variable, which is defined
in include/config_cmd_default.h; we also add an entry to
doc/feature-removal-schedule.txt which announces the removal of this
default setting in two releases from now, i. e. with v2013.07.Signed-off-by: Wolfgang Denk
Cc: Tom Rini
06 Dec, 2011
1 commit
-
We want to move everything to phylib, and we definitely don't want
new drivers using the miiphy infrastructure.Signed-off-by: Andy Fleming
06 Oct, 2011
2 commits
-
This is long over due. All but two net drivers have been converted, but
those have now been dropped.The only thing left to do is actually delete all references to NET_MULTI
and code that is compiled when that is not defined. So here we scrub the
core code.Signed-off-by: Mike Frysinger
-
Now that we've got boards.cfg and most people have converted over,
start warning people who have yet to so we can phase board configs
completely out of the Makefile.Signed-off-by: Mike Frysinger
30 Oct, 2010
1 commit
-
When this define was introduced, the idea was to provide a soft
migration path for ARM boards to get adapted to the new relocation
support. However, other recent changes led to a different
implementation (ELF relocation), where this no longer works. By now
CONFIG_SYS_ARM_WITHOUT_RELOC does not only not help any more, but it
actually hurts because it obfuscates the actual code by sprinkling it
with lots of dead and non-working debris.So let's make a clean cut and drop CONFIG_SYS_ARM_WITHOUT_RELOC.
Signed-off-by: Wolfgang Denk
Tested-by: Heiko Schocher
Tested-by: Reinhard Meyer
04 Oct, 2010
1 commit
-
Signed-off-by: Wolfgang Denk
23 Sep, 2009
1 commit
-
The more standard 'source' command provides identical functionality to
the autoscr command.Environment variable names/values on the MVBC_P, MVBML7, kmeter1,
mgcoge, and km8xx boards are updated to no longer refernce 'autoscr'.The 'autoscript' and 'autoscript_uname' environment variables are
also removed.Signed-off-by: Peter Tyser
Acked-by: Andre Schwarz
Acked-by: Heiko Schocher
17 Jul, 2009
1 commit
-
Legacy NAND had been scheduled for removal. Any boards that use this
were already not building in the previous release due to an #error.The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed. There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.Signed-off-by: Scott Wood
13 Jun, 2009
1 commit
-
The following individual I2C commands have been removed: imd, imm, inm,
imw, icrc32, iprobe, iloop, isdram.The functionality of the individual commands is still available via
the 'i2c' command.This change only has an impact on those boards which did not have
CONFIG_I2C_CMD_TREE defined.Signed-off-by: Peter Tyser
16 May, 2009
1 commit
-
This will make CONFIG_NET_MULTI the only net driver configuration and
we'll be able to remove this option.Signed-off-by: Ben Warren
05 Apr, 2009
1 commit
04 Apr, 2009
2 commits
-
According to the doc/feature-removal-schedule.txt, the "autoscr"
command will be replaced by the "source" command in approximately 6
months from now.This patch prepares this change and starts a 6 month transition
period as follows:- The new "source" command has been added, which implements exactly
the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the
new "source" command
- Related environment variables ("autoscript", "autoscript_uname")
have *not* been adapted yet; these will be renamed resp. removed in
a separate patch when the support for the "autoscr" command get's
finally dropped.Signed-off-by: Wolfgang Denk
-
Announce removal of all non-GPL or GPL-incompatible files
after August 2009.Signed-off-by: Wolfgang Denk
12 Feb, 2009
1 commit
-
Signed-off-by: Peter Tyser