18 Sep, 2017
1 commit
-
bss section is cleared in crt0.S. board_init_r() is also
entered from crt0 code.Signed-off-by: Anatolij Gustschin
Cc: Christian Gmeiner
Cc: Nikita Kiryanov
Cc: Jagan Teki
Cc: Tim Harvey
Cc: Marek Vasut
Cc: Lukasz Majewski
Cc: Fabio Estevam
Reviewed-by: Lukasz Majewski
Reviewed-by: Christian Gmeiner
Reviewed-by: Fabio Estevam
28 Aug, 2017
1 commit
-
Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D,
MX6Q and MX6QP processors move it to the soc.c file.Signed-off-by: Breno Lima
Acked-by: Stefano Babic
Reviewed-by: Lukasz Majewski
Reviewed-by: Fabio Estevam
16 Aug, 2017
1 commit
-
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.Suggested-by: Wolfgang Denk
Signed-off-by: Simon Glass
12 Jul, 2017
2 commits
-
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.This change is also coherent with the structure in kernel.
Signed-off-by: Stefano Babic
CC: Fabio Estevam
CC: Akshay Bhat
CC: Ken Lin
CC: Marek Vasut
CC: Heiko Schocher
CC: "Sébastien Szymanski"
CC: Christian Gmeiner
CC: Stefan Roese
CC: Patrick Bruenn
CC: Troy Kisky
CC: Nikita Kiryanov
CC: Otavio Salvador
CC: "Eric Bénard"
CC: Jagan Teki
CC: Ye Li
CC: Peng Fan
CC: Adrian Alonso
CC: Alison Wang
CC: Tim Harvey
CC: Martin Donnelly
CC: Marcin Niestroj
CC: Lukasz Majewski
CC: Adam Ford
CC: "Albert ARIBAUD (3ADEV)"
CC: Boris Brezillon
CC: Soeren Moch
CC: Richard Hu
CC: Wig Cheng
CC: Vanessa Maegima
CC: Max Krummenacher
CC: Stefan Agner
CC: Markus Niebel
CC: Breno Lima
CC: Francesco Montefoschi
CC: Jaehoon Chung
CC: Scott Wood
CC: Joe Hershberger
CC: Anatolij Gustschin
CC: Simon Glass
CC: "Andrew F. Davis"
CC: "Łukasz Majewski"
CC: Patrice Chotard
CC: Nobuhiro Iwamatsu
CC: Hans de Goede
CC: Masahiro Yamada
CC: Stephen Warren
CC: Andre Przywara
CC: "Álvaro Fernández Rojas"
CC: York Sun
CC: Xiaoliang Yang
CC: Chen-Yu Tsai
CC: George McCollister
CC: Sven Ebenfeld
CC: Filip Brozovic
CC: Petr Kulhavy
CC: Eric Nelson
CC: Bai Ping
CC: Anson Huang
CC: Sanchayan Maity
CC: Lokesh Vutla
CC: Patrick Delaunay
CC: Gary Bisson
CC: Alexander Graf
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam
Reviewed-by: Christian Gmeiner -
At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
12 May, 2017
1 commit
-
The variable pwm_pad is never referenced, drop.
Cc: Christian Gmeiner
Signed-off-by: Tom Rini
Reviewed-by: Christian Gmeiner
07 Sep, 2016
1 commit
-
Currently MX6 SPL DDR initialization hardcodes the REF_SEL and
REFR fields of the MDREF register as 1 and 7, respectively for
DDR3 and 0 and 3 for LPDDR2.Looking at the MDREF initialization done via DCD we see that
boards do need to initialize these fields differently:$ git grep 0x021b0020 board/
board/bachmann/ot1200/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800
board/ccv/xpress/imximage.cfg:DATA 4 0x021b0020 0x00000800 /* MMDC0_MDREF */
board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x7800
board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/mx6dl.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6qsabreauto/mx6qp.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6sabresd/mx6dlsabresd.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800
board/freescale/mx6slevk/imximage.cfg:DATA 4 0x021b0020 0x00001800
board/freescale/mx6sxsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00000800
board/freescale/mx6sxsabresd/imximage.cfg:DATA 4 0x021b0020 0x00000800
board/warp/imximage.cfg:DATA 4 0x021b0020 0x00001800So introduce a mechanism for users to be able to configure
REFSEL and REFR fields as needed.Keep all the mx6 SPL users in their current REF_SEL and REFR values,
so no functional changes for the existing users.Signed-off-by: Fabio Estevam
Reviewed-by: Eric Nelson
13 Nov, 2015
1 commit
-
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.Cc: Christian Gmeiner
Signed-off-by: Fabio Estevam
Acked-by: Christian Gmeiner
13 Sep, 2015
2 commits
-
We should not return 0 on failure, so return a negative error code
instead.Also centralize the error path so that is easier to follow.
Cc: Christian Gmeiner
Signed-off-by: Fabio Estevam -
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Heiko Schocher
Cc: Christian Gmeiner
Cc: Stefan Roese
Cc: Troy Kisky
Cc: Nikita Kiryanov
Cc: "Eric Bénard"
Cc: Fabio Estevam
Cc: Tim Harvey
Cc: Marek Vasut
Cc: Markus Niebel
Cc: Otavio Salvador
Acked-by: Stefan Roese
Acked-by: Marek Vasut
Acked-by: Christian Gmeiner
Acked-by: Markus Niebel
Acked-by: Troy Kisky
Acked-by: Igor Grinberg
08 Jun, 2015
2 commits
-
On this bus there is a EEPROM containing EDID and ddr3
calibration information.Signed-off-by: Christian Gmeiner
-
Make it possible to use the i2c bus in SPL.
Signed-off-by: Christian Gmeiner
22 Jan, 2015
4 commits
-
Currently we only support the Micron MT41K128M16JT-125 ddr3 chip.
Signed-off-by: Christian Gmeiner
-
Signed-off-by: Christian Gmeiner
-
We need this way for SPL boot.
Signed-off-by: Christian Gmeiner
-
To support different ddr3 memory sizes we should start using
imx_ddr_size(..) instead of the define PHYS_SDRAM_SIZE.Signed-off-by: Christian Gmeiner
24 Nov, 2014
1 commit
-
When an invalid USDHC port is passed we should return -EINVAL instead of 0.
Also, return the error immediately on fsl_esdhc_initialize() failure.
Cc: Christian Gmeiner
Signed-off-by: Fabio Estevam
13 Nov, 2014
1 commit
-
Today I got the final board and found out that a different
connector is used as the one on my development board. The
new connector has swaped pins for cd and wp.This change is tested on a production ready board.
Signed-off-by: Christian Gmeiner
06 Nov, 2014
1 commit
30 Oct, 2014
3 commits
-
Signed-off-by: Christian Gmeiner
-
On the 'mr' variant switching to 'mmc dev 1' will result
in "MMC: no card present".Signed-off-by: Christian Gmeiner
-
The older 'mr' variant and the generic variant of the
OT1200 differ in some places. As the name suggests the
generic variant supports more boot devices.In order to be compatible with the 'mr' variant we define
some 'feature' GPIOs. On the 'mr' variant this pads are
not connected so we define their state with the help
of the internal pullups.On the generic variant this GPIOs are connected and
represent the state of the hardware.Signed-off-by: Christian Gmeiner
29 Oct, 2014
1 commit
-
This commit introduces a Kconfig symbol for each ARM CPU:
CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
for CPU_ARM1176 and CPU_V7.For each target, the corresponding CPU is selected and the definition of
SYS_CPU in the corresponding Kconfig file is removed.Also, it removes redundant "string" type in some Kconfig files.
Signed-off-by: Georges Savoundararadj
Acked-by: Albert ARIBAUD
Cc: Masahiro Yamada
23 Oct, 2014
2 commits
-
One of the possible boot devices can be sata.
Signed-off-by: Christian Gmeiner
-
Commit 155fa9af95ac5be857a7327e7a968a296e60d4c8 changed the way
to define a GPIO line, which can be used to force CS high
across multiple transactions. In order to fix sf detection
change board code to make use of board_spi_cs_gpio(..).Signed-off-by: Christian Gmeiner
Acked-by: Stefano Babic
Acked-by: Nikita Kiryanov
21 Oct, 2014
1 commit
-
Signed-off-by: Christian Gmeiner
Reviewed-by: Masahiro Yamada
06 Oct, 2014
1 commit
-
This patch adds support for the OT1200 series of devices.
Following components are used in u-boot:
+ ethernet
+ i2c
+ emmc
+ gpioFor more details see README.
Changes v1 > v2
- make use of enable_cspi_clock(..)
- fix usage of OUTPUT_40OHM define
- added READMEChanges v2 > v3
- improve spelling in README
- added own copy of mx6q_4x_mt41j128.cfgSigned-off-by: Christian Gmeiner