03 Nov, 2018

1 commit

• aa4fea4f3   MLK-20154-2 imx8mm_ddr3l_val: Add SPI NOR support ... Browse Code »

  iMX8MM DDR3L validation board uses FPGA to link with SPI NOR flash
  on ECSPI1 port. Update the codes and configurations to enable the
  ECSPI1 to access SPI NOR in u-boot.

  Signed-off-by: Ye Li
  Reviewed-by: Peng Fan

  Ye Li

  2018-11-03 09:50:09 +0800  

25 Oct, 2018

1 commit

• 1742883a1   MLK-20049-2 imx8mm_val: Add DDR3L validation board support ... Browse Code »

  2

  Add DDR3 init codes, board codes, defconfig and DTS into u-boot.
  Basic modules are ready: SD, UART, I2C, USB host and NAND.

  There is a FPGA on this board. It controls WDOG_B, and ENET PHY RESET.
  So reset and ethernet won't work at default.

  Signed-off-by: Ye Li
  Acked-by: Peng Fan

  Ye Li

  2018-10-25 11:22:43 +0800  

06 Sep, 2018

1 commit

• 7c10aa87f   MLK-19458 imx8/imx8m: Fix initrd_high env to disable relocation initramfs ... Browse Code »

  When running on ARM64 platforms like imx8 and imx8m, the initrd_high should set to
  0xffffffffffffffff not 0xffffffff. Otherwise the initramfs will be relocated to high
  memory by u-boot before booting up kernel.
  This may not cause issue, but to align with previous imx series and save boot time,
  we'd better disable relocation for initramfs.

  Signed-off-by: Ye Li
  (cherry picked from commit 33d88b0f2e31d965fd455bff9da7391d6a7b3594)

  Ye Li

  2018-09-06 09:52:46 +0800  

28 Aug, 2018

1 commit

• b9116f903   MLK-18901-3 imx8mm: Enable mtest command for validation and EVK boards ... Browse Code »

  Enable the mtest command and add relevant configurations for tested memory
  range to all validation boards and EVK board.

  Signed-off-by: Ye Li
  (cherry picked from commit d92447e705ff6f077c602d340c01535ccee0ea66)

  Ye Li

  2018-08-28 16:33:18 +0800  

06 Aug, 2018

1 commit

• 8bc766feb   MLK-18431-01 imx8mm: move the spl bss base to ocram 0x910000 ... Browse Code »

  Move the SPL bss and malloc base to OCRAM 0x910000.
  OCRAM_S will be reserved for dram low power purpose.

  Signed-off-by: Bai Ping
  (cherry picked from commit 2b2cd1adc23525d2fb79dc281cd2a741ebe13f90)

  Bai Ping

  2018-08-06 11:37:44 +0800  

19 Jul, 2018

1 commit

• 27e6ab4eb   MLK-18980 imx8mm_ddr4_val: fix build break for imx8mm_ddr4_val defconfig ... Browse Code »

  The patch fixes the following build break by adding some missing definitons
  into the defconfig

  drivers/usb/gadget/f_sdp.c:278:59: error: ‘CONFIG_SDP_LOADADDR’
  undeclared (first use in this function)
  sdp->dnl_address = cmd->addr ? be32_to_cpu(cmd->addr):CONFIG_SDP_LOADADDR;
  ^
  make[3]: *** [spl/drivers/usb/gadget/f_sdp.o] Error 1

  Signed-off-by: Jason Liu

  Jason Liu

  2018-07-19 09:26:26 +0800  

02 Jul, 2018

1 commit

• fa79b5236   MLK-18639-3 imx8mm_val: Add board codes for iMX8MM DDR4 validation board ... Browse Code »

  2

  Add SPL/u-boot board codes and DDR4 settings for iMX8MM DDR4 validation board.
  DDR overnight stress test is passed.

  Supported modules:
  SD/eMMC, I2C, ENET, Flexspi, UART and USB.

  Build config:
  imx8mm_ddr4_val_defconfig

  Signed-off-by: Ye Li
  (cherry picked from commit 6045484796a87a31938a19d2d8fa2ae095804586)

  Ye Li

  2018-07-02 11:57:08 +0800