Eric Lee / smarc-uboot

11 Feb, 2018

2 commits

06 Feb, 2018

1 commit

  • a4fa81146   cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA ... Browse Code »

    cmd/Makefile has:

    ifdef CONFIG_FPGA
    obj-$(CONFIG_CMD_FPGA) += fpga.o
    endif

    which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently
    does nothing. Let's remove that Makefile conditional and instead express
    this equivalent dependency in Kconfig, so a lot of redundant

    # CONFIG_CMD_FPGA is not set

    can be removed from board defconfigs that don't actually have an FPGA.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

29 Jan, 2018

1 commit

  • caf2233b2   bcm283x: Add pinctrl driver ... Browse Code »
    40

    The bcm283x family of SoCs have a GPIO controller that also acts as
    pinctrl controller.

    This patch introduces a new pinctrl driver that can actually properly mux
    devices into their device tree defined pin states and is now the primary
    owner of the gpio device. The previous GPIO driver gets moved into a
    subdevice of the pinctrl driver, bound to the same OF node.

    That way whenever a device asks for pinctrl support, it gets it
    automatically from the pinctrl driver and GPIO support is still available
    in the normal command line phase.

    Signed-off-by: Alexander Graf

    Alexander Graf
     

11 Oct, 2017

1 commit

  • ad12dc184   cmd: Toggle the default value of CONFIG_CMD_IMLS ... Browse Code »

    Having this as a 'default y' is rather annoying because it doesn't
    actually compile unless other options are defined in the board header:

    ../cmd/bootm.c: In function 'do_imls_nor':
    ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
    i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

    Make it 'default n' so people who develop new boards that start from a
    blank defconfig have one less compilation failure to debug.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

27 Sep, 2017

1 commit

08 Sep, 2017

3 commits

07 Sep, 2017

1 commit

  • 2d0cf3b2a   Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED" ... Browse Code »

    This reverts commit 25877d4e4c45451c5398aec3de50e0d5befe0e9f.

    This is a workaround for Raspberry Pi boot failures seen when passing on
    the device tree provided by the Raspberry Pi firmware at boot. Without
    CONFIG_OF_EMBED, we just get stuck at "Starting kernel ..." when we try
    to boot Linux with this device tree.

    Signed-off-by: Paul Barker
    Cc: Simon Glass
    Tested-by: Jonathan Gray
    Reviewed-by: Simon Glass

    Paul Barker
     

02 Sep, 2017

1 commit

  • ecad7051b   configs: Migrate all of the existing USB symbols, except fastboot ... Browse Code »
    20

    This syncs all of the currently Kconfig'd symbols out of the headers and
    into the defconfig files. This has two exceptions, first am335x_evm
    needs to be converted to DM in SPL and then it can stop undef'ing
    CONFIG_DM_USB. Leaving this as-is results in a build failure, and
    without work, run time failure. The other case is am43xx_evm.h and in
    turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB
    host mode in SPL, but still desire to have gadget mode in U-Boot proper.

    Signed-off-by: Tom Rini

    Tom Rini
     

28 Aug, 2017

1 commit

27 Aug, 2017

1 commit

15 Aug, 2017

1 commit

31 Jul, 2017

1 commit

11 Jul, 2017

1 commit

10 Jul, 2017

1 commit

07 Jul, 2017

1 commit

10 May, 2017

5 commits

01 May, 2017

1 commit

30 Dec, 2016

2 commits

  • 45a68fe26   mmc: move some SDHCI related options to Kconfig ... Browse Code »

    While I moved the options, I also renamed them so that they are all
    prefixed with MMC_SDHCI_.

    This commit was created in the following steps.

    [1] Rename with the following command
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e '
    s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g
    s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g
    s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g
    s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g
    s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g
    s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g
    '

    [2] create the Kconfig entries in drivers/mmc/Kconfig

    [3] Move the options by the following command
    tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \
    MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR

    [4] Sort drivers/mmc/Makefile for readability

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     
  • e1ce61fbb   mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCI ... Browse Code »

    Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
    My motivation for the rename is, ultimately, to make all the MMC
    options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
    like Linux.

    This commit was created as follows:

    [1] Rename the config option with the following command:
    find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
    -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g'

    [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig

    [3] run "tools/moveconfig.py -y MMC_SDHCI"

    [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Tom Rini
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

04 Dec, 2016

1 commit

  • 3337e3af5   Enable DISTRO_DEFAULT on platforms that missed it before ... Browse Code »
    20

    A number of platforms had been using the distro default feature before
    it was moved to Kconfig but did not enable the new Kconfig option when
    it was enabled. This caused a regression in terms of features and this
    introduces breakage when more things move to Kconfig.

    Signed-off-by: Tom Rini

    Tom Rini
     

29 Nov, 2016

1 commit

24 Oct, 2016

3 commits

12 Oct, 2016

2 commits

10 Sep, 2016

1 commit

09 Sep, 2016

1 commit

07 Sep, 2016

1 commit

  • 601147b06   serial: bcm283x_mu: Detect disabled serial device ... Browse Code »

    On the raspberry pi, you can disable the serial port to gain dynamic frequency
    scaling which can get handy at times.

    However, in such a configuration the serial controller gets its rx queue filled
    up with zero bytes which then happily get transmitted on to whoever calls
    getc() today.

    This patch adds detection logic for that case by checking whether the RX pin is
    mapped to GPIO15 and disables the mini uart if it is not mapped properly.

    That way we can leave the driver enabled in the tree and can determine during
    runtime whether serial is usable or not, having a single binary that allows for
    uart and non-uart operation.

    Signed-off-by: Alexander Graf
    Acked-by: Stephen Warren
    Reviewed-by: Simon Glass

    Alexander Graf
     

26 Apr, 2016

3 commits

12 Apr, 2016

1 commit

  • d22a76575   ARM: add Raspberry Pi 3 64-bit config ... Browse Code »

    On all Pis so far, the VC FW provides a short stub to set up the ARM CPU
    before entering the kernel (a/k/a U-Boot for us). This feature is not
    currently supported by the VC FW when booting in 64-bit mode. However,
    this feature will likely appear in the near future, and this U-Boot port
    assumes that such a feature is in place. Without that feature, or a
    temporary workaround described below, U-Boot will not boot.

    Once the VC FW does provide the ARM stub, u-boot.bin built for rpi_3 can
    be used drectly as kernel7.img, in the same way as any other RPi port. The
    following config.txt is required:

    # Fix mini UART input frequency, and setup/enable up the UART.
    # Without this option, U-Boot will not boot, even if you don't care
    # about the serial console. This option will always be required for
    # all RPi3 use-cases, unless the PL011 UART is used, which is not
    # yet supported by rpi_3* builds of U-Boot.
    enable_uart=1
    # Boot in AArch64 (64-bit) mode.
    # It is possible that a future VC FW will remove the need for this
    # option, instead auto-setting 32-/64-bit mode based on the "kernel"
    # filename present on the SD card.
    arm_control=0x200

    Prior to the VC FW providing the ARM boot stub, you can use the following
    steps to build an equivalent stub into the U-Boot binary:

    git clone https://github.com/swarren/rpi-3-aarch64-demo.git \
    ../rpi-3-aarch64-demo
    (cd ../rpi-3-aarch64-demo && ./build.sh)
    Build U-Boot for rpi_3 in the usual way
    cat ../rpi-3-aarch64-demo/armstub64.bin u-boot.bin > u-boot.bin.stubbed
    Use u-boot.bin.stubbed as kernel7.img on the Pi SD card.

    In this case, the following additional entries are required in config.txt:

    # Tell the FW to load the kernel image at address 0, the reset vector.
    kernel_old=1

    Signed-off-by: Stephen Warren
    Reviewed-by: Tom Rini

    Stephen Warren