Eric Lee / smarc-uboot

09 Mar, 2018

1 commit

  • b996b7d42   ARM: Drop unreferenced CONFIG_* defines named after boards ... Browse Code »

    The following config symbols are only defined once and never referenced
    anywhere else:

    CONFIG_AT91SAM9263EK
    CONFIG_AT91SAM9RLEK
    CONFIG_BARIX_IPAM390
    CONFIG_BOARD_H2200
    CONFIG_EP9301
    CONFIG_KZM_A9_GT
    CONFIG_PICOSAM
    CONFIG_PLATINUM_PICON
    CONFIG_PLATINUM_TITANIUM
    CONFIG_PM9261
    CONFIG_PM9263
    CONFIG_PM9G45
    CONFIG_SIEMENS_DRACO
    CONFIG_SIEMENS_PXM2
    CONFIG_SIEMENS_RUT
    CONFIG_SMDKC100
    CONFIG_SMDKV310
    CONFIG_STM32F4DISCOVERY

    Most of them are config symbols named after the respective boards which
    seems to have been a standard practice at some point.

    Signed-off-by: Tuomas Tynkkynen

    Tuomas Tynkkynen
     

24 Feb, 2018

1 commit

  • d021e9421   Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_BOOTP_BOOTPATH
    CONFIG_BOOTP_DNS
    CONFIG_BOOTP_GATEWAY
    CONFIG_BOOTP_HOSTNAME
    CONFIG_BOOTP_PXE
    CONFIG_BOOTP_SUBNETMASK
    CONFIG_CMDLINE_EDITING
    CONFIG_AUTO_COMPLETE
    CONFIG_SYS_LONGHELP
    CONFIG_SUPPORT_RAW_INITRD
    CONFIG_ENV_VARS_UBOOT_CONFIG

    Signed-off-by: Adam Ford
    [trini: Re-run the migration]
    Signed-off-by: Tom Rini

    Adam Ford
     

11 Feb, 2018

1 commit

  • 278b90ce7   configs: Migrate CONFIG_SYS_TEXT_BASE ... Browse Code »
    15

    On the NIOS2 and Xtensa architectures, we do not have
    CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
    values into the defconfig and removing them from the headers.

    I did not attempt to add more default values in and for now will leave
    that to maintainers.

    Signed-off-by: Tom Rini

    Tom Rini
     

29 Jan, 2018

1 commit

04 Sep, 2017

3 commits

  • e090579d0   include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions ... Browse Code »

    This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be
    equal to CONFIG_SYS_CBSIZE in numerous configuration files.

    We remove such definitions in two situations:

    - CONFIG_SYS_CBSIZE is otherwise not defined in the board
    configuration file, which means the default value of
    CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is
    larger.

    - CONFIG_SYS_CBSIZE is defined in the board configuration file, but
    to a value equal or less than 512. In this case, the default value
    of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it
    is equal or larger.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 1f20fc53b   include/configs: drop default definitions of CONFIG_SYS_MAXARGS ... Browse Code »

    Now that include/config_fallbacks.h define a sane fallback for
    CONFIG_SYS_MAXARGS, we can drop the definition of this constant in all
    configurations that were using the default value.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     
  • 432e39806   include/configs: drop default definitions of CONFIG_SYS_PBSIZE ... Browse Code »
    1

    Now that the fallback value of CONFIG_SYS_PBSIZE in
    include/config_fallbacks.h has been adjusted, remove its definition
    from a large number of board configuration files.

    Signed-off-by: Thomas Petazzoni
    Reviewed-by: Tom Rini

    Thomas Petazzoni
     

15 Aug, 2017

1 commit

26 Jul, 2017

1 commit

23 May, 2017

1 commit

01 May, 2017

1 commit

07 Apr, 2017

1 commit

  • 01abae4d0   Remove various unused interrupt related code ... Browse Code »

    With d53ecad92f06 some unused interrupt related code was removed.
    However all of these options are currently unused. Rather than migrate
    some of these options to Kconfig we just remove the code in question.

    The only related code changes here are that in some cases we use
    CONFIG_STACKSIZE in non-IRQ related context. In these cases we rename
    and move the value local to the code in question.

    Fixes: d53ecad92f06 ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
    Signed-off-by: Tom Rini

    Tom Rini
     

20 Mar, 2017

1 commit

26 Jan, 2017

1 commit

22 Jan, 2017

1 commit

  • 2d8d190c8   status_led: Kconfig migration ... Browse Code »
    14

    Move all of the status LED feature to drivers/led/Kconfig.
    The LED status definitions were moved from the board configuration
    files to the defconfig files.

    TBD: Move all of the definitions in the include/status_led.h to the
    relevant board's defconfig files.

    Tested boards: CL-SOM-AM57x, CM-T335

    Signed-off-by: Uri Mashiach

    Uri Mashiach
     

14 Jan, 2017

1 commit

30 Dec, 2016

1 commit

  • c27269953   mmc: complete unfinished move of CONFIG_MMC ... Browse Code »
    26

    Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created
    a Kconfig entry for this option without any actual moves, then
    commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved
    instances only for SUNXI.

    We generally do not like such partial moves. This kind of work
    is automated by tools/moveconfig.py, so it is pretty easy to
    complete this move.

    I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
    This shortens the configs and will ease new board porting.

    This commit was created as follows:

    [1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

    [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Jaehoon Chung

    Masahiro Yamada
     

10 Sep, 2016

1 commit

10 Jun, 2016

1 commit

26 Apr, 2016

4 commits

06 Feb, 2016

1 commit

  • a187559e3   Use correct spelling of "U-Boot" ... Browse Code »

    Correct spelling of "U-Boot" shall be used in all written text
    (documentation, comments in source files etc.).

    Signed-off-by: Bin Meng
    Reviewed-by: Heiko Schocher
    Reviewed-by: Simon Glass
    Reviewed-by: Minkyu Kang

    Bin Meng
     

25 Oct, 2015

1 commit

  • 09f3ca3dd   arm, powerpc: select SYS_GENERIC_BOARD ... Browse Code »

    We have finished Generic Board conversion for ARM and PowerPC, i.e.
    all the boards have been converted except OpenRISC, SuperH, SPARC,
    which have not supported Generic Board framework yet.

    Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
    defines in include/configs/*.h.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

13 Sep, 2015

1 commit

13 Aug, 2015

1 commit

  • 181bd9dc6   kconfig: add config option for shell prompt ... Browse Code »
    102

    Add option to set shell prompt string from menuconfig and migrate
    boards globally.

    The migration is done as follows:
    - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
    entry moved to their defconfig files.
    - Boards that defined some kind of #ifdef logic which selects the
    CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
    right before the #ifdef logic and were left alone.
    - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
    CONFIG_SYS_PROMPT was removed from all _common.h and _common.h
    files. This results in a streamlined default value across platforms, and
    includes the following files: spear-common, sunxi-common, mv-common,
    ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
    - Boards that relied on _common.h values of CONFIG_SYS_PROMPT were
    not updated in their respective defconfig files under the assumption that
    since they did not explicitly define a value, they're fine with whatever
    the default is.
    - On the other hand, boards that relied on a value defined in some
    _common.h file such as woodburn_common, rpi-common,
    bur_am335x_common, ls2085a_common, siemens_am33x_common, and
    omap3_evm_common, had their values moved to the respective defconfig files.
    - The define V_PROMPT was removed, since it is not used anywhere except for
    assigning a value for CONFIG_SYS_PROMPT.

    Cc: Tom Rini
    Cc: Masahiro Yamada
    Cc: Stefano Babic
    Cc: Igor Grinberg
    Signed-off-by: Nikita Kiryanov
    [trini: Add spring, sniper, smartweb to conversion]
    Signed-off-by: Tom Rini

    Nikita Kiryanov
     

26 Jun, 2015

1 commit

02 Jun, 2015

1 commit

21 Nov, 2014

1 commit

  • f2168440d   ARM: remove CONFIG_ARM920T defines ... Browse Code »

    CONFIG_CPU_ARM920T was introduced into Kconfig by commit 2e07c249a67e
    (kconfig: arm: introduce symbol for ARM CPUs).

    This commit removes all the defines of CONFIG_ARM920T and replaces the
    only reference in drivers/usb/host/ohci-hcd.c with CONFIG_CPU_ARM920T.

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

24 Oct, 2014

1 commit

  • 8c688bc4d   kconfig: move CONFIG_SYS_HZ to lib/Kconfig ... Browse Code »

    CONFIG_SYS_HZ is always defined as 1000 in config_fallbacks.h
    (but some boards still have redundant definitions).

    This commit moves the definition and the document in README to
    Kconfig. Since lib/Kconfig can assure that CONFIG_SYS_HZ is 1000,
    the sanity check in lib/time.c should be removed.

    Signed-off-by: Masahiro Yamada
    Reviewed-by: Marek Vasut

    Masahiro Yamada
     

05 Jul, 2014

1 commit

04 Sep, 2011

1 commit

27 Oct, 2010

1 commit

  • 25ddd1fb0   Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value ... Browse Code »

    CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
    being able to use "sizeof(struct global_data)" in assembler files.
    Recent experience has shown that manual synchronization is not
    reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into
    GENERATED_GBL_DATA_SIZE which gets automatically generated by the
    asm-offsets tool. In the result, all definitions of this value can be
    deleted from the board config files. We have to make sure that all
    files that reference such data include the new file.

    No other changes have been done yet, but it is obvious that similar
    changes / simplifications can be done for other, related macro
    definitions as well.

    Signed-off-by: Wolfgang Denk
    Acked-by: Kumar Gala

    Wolfgang Denk
     

19 Oct, 2010

1 commit

  • d24f2d321   mkconfig: change CONFIG_MK_ prefix into plain CONFIG_ ... Browse Code »

    When planning for more generalization and Makefile cleanup it became
    obvious that the introduction of a separate CONFIG_MK_ name space for
    config options that were set through scripting in the Makefile was
    not a good idea.

    Originally the idea was to provide a script-free approach to supply
    configuration options - there was no real need for a separate name
    space. But when we now convert the existing Makefile entries to make
    use of this approach, it would mean that we have to touch a large
    number of board config files and add #ifdef / #define sequences to
    "convert" from the CONFIG_MK_ to the CONFIG_ name space.

    It seems much cleaner to get rid of this somewhat arbitrary _MK
    string now for the few boards that actually use it.

    Signed-off-by: Wolfgang Denk
    Acked-by: Mike Frysinger

    Wolfgang Denk
     

13 Feb, 2010

1 commit