22 Jun, 2011
24 commits
-
Signed-off-by: Wolfgang Denk
-
Make AFEB9260 build again.
Based on fix for AT91SAM9260EK.Signed-off-by: Sergey Lapin
-
This patch fixes following compile warning:
---88---
Signed-off-by: Andreas Bießmann
-
This patch removes the warning
---88---
Signed-off-by: Andreas Bießmann
-
Signed-off-by: Eric Bénard
-
Signed-off-by: Eric Bénard
-
Signed-off-by: Eric Bénard
-
atmel rework changed define names which broke this file
Signed-off-by: Eric Bénard
-
The rework effort for ATMEL (AT91/AVR32) accidentially broke build of
this driver. Fix this to make it build again. However this driver should
be reworked as soon as possible!Signed-off-by: Reinhard Meyer
-
Fix EMK TOP9000 board to build again:
- changes required due to ATMEL reworkSigned-off-by: Reinhard Meyer
-
Make ATMEL's at91sam9260/9g20/9xe-ek boards build again
Signed-off-by: Reinhard Meyer
-
Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
single board computer modules. Includes NAND flash and Ethernet
support.Signed-off-by: Ryan Mallon
-
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
* Fix: timer.c compile error io.h not found with arm/at91rm9200
* update arm920t/at91 to ATMEL_xxx name scheme
* update arm920t/at91 soc lib
* update at91_emac driverSigned-off-by: Jens Scharsig
Tested-by: Andreas Bießmann -
Signed-off-by: Fabio Estevam
-
Signed-off-by: Helmut Raiger
-
Signed-off-by: Fabio Estevam
-
Signed-off-by: Fabio Estevam
-
Remove obsolete config.mk from QONG board.
Signed-off-by: Stefano Babic
-
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V
Signed-off-by: Sandeep Paulraj -
DRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V
Signed-off-by: Sandeep Paulraj -
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V
Signed-off-by: Sandeep Paulraj -
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V
Signed-off-by: Sandeep Paulraj -
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V
Signed-off-by: Sandeep Paulraj -
Provide SDRAM base address and use SRAM for initial stack
Signed-off-by: Aneesh V
Signed-off-by: Sandeep Paulraj
10 Jun, 2011
1 commit
-
The clock-frequency property in an audio codec's device tree node is set to
the input clock frequency for that codec. On the Freescale P1022DS board,
the input clock is enabled only if the hwconfig 'audclk' option is set.
Therefore, the property should only be set in the device tree if the clock
is actually enabled.Signed-off-by: Timur Tabi
Signed-off-by: Kumar Gala
09 Jun, 2011
2 commits
-
* 'master' of git://git.denx.de/u-boot-arm:
SMDK6400: fix the compiler error
imx27lite: Remove local config.mk
mx31ads: Fix environment location on flash
imx31_litekit: Remove local config.mk
mx31litekit: Fix boot with the new relocation scheme.
mx31ads: Use the new relocation scheme -
This patch adds _end for fix following compiler error
arch/arm/cpu/arm1176/start.o: In function `_end_ofs':
arch/arm/cpu/arm1176/start.S:61: undefined reference to `_end'Signed-off-by: Minkyu Kang
07 Jun, 2011
3 commits
-
Local board config.mk should be avoided.
Place CONFIG_SYS_TEXT_BASE definition into the board config file instead.
Signed-off-by: Fabio Estevam
-
At the moment u-boot and u-boot environment on flash
have overlapping addresses, so each u-boot update erases
the environment. Fix this by placing evironment right
after u-boot. Also, remove confusing comment about environment
location.Signed-off-by: Felix Radensky
-
Local board config.mk should be avoided.
Place CONFIG_SYS_TEXT_BASE definition into the board config file instead.
Signed-off-by: Fabio Estevam
Acked-by: Stefano Babic
06 Jun, 2011
2 commits
-
imx31_litekit has been converted to the new relocation scheme, but it does not boot.
Make the boot functional by using board_early_init_f .
Signed-off-by: Fabio Estevam
Tested-by: Magnus Lilja -
This fixes the MX31ADS build by using the new relocation scheme.
Signed-off-by: Fabio Estevam
Tested-by: Felix Radensky
04 Jun, 2011
5 commits
-
The recent commit ea882baf9c1 broke embedding environments in the middle
of a sector, so relocate it to the start of the 2nd sector.Signed-off-by: Harald Krapfenbauer
Signed-off-by: Mike Frysinger -
Now that the zlib code has been relocated to a dedicated subdir, make
sure we still build it with -O2 for boards that want speed over size.Signed-off-by: Mike Frysinger
-
Relocate the env to one of the small end sectors to avoid issues with
embedding it, such as support being broken (by recent commit ea882baf9c1),
and for taking a while to save updates.Signed-off-by: Mike Frysinger
-
Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset. So when the on-chip rom has a
functioning reset helper, use it.Signed-off-by: Mike Frysinger
-
Now that common code is a bit smarter when it comes to default LDSCRIPT
values, rename the default Blackfin file and drop the Blackfin-specific
config.mk logic.Signed-off-by: Mike Frysinger
03 Jun, 2011
2 commits
-
Signed-off-by: Wolfgang Denk
-
Signed-off-by: Wolfgang Denk
02 Jun, 2011
1 commit
-
All data in dtb is big endian. Some ARM devices are little-endian.
In print_data(), it displays data with big-endian format. For ARM device,
data should be converted to little-endian first.Signed-off-by: Haojian Zhuang
Cc: Gerald Van Baren
