25 Apr, 2012
1 commit
-
Signed-off-by: Wolfgang Denk
24 Apr, 2012
4 commits
-
Now that run_command() handles both parsers, clean up sandbox to use it.
This fixes a build error.Signed-off-by: Simon Glass
Acked-by: Mike Frysinger -
Commit 0a672d4 "arm: Add Prep subcommand support to bootm" re-organized
do_bootm_linux for ARM. During the re-organization, the call to
fdt_fixup_ethernet() was removed. I assume this was useful, so add it
back.Signed-off-by: Stephen Warren
Acked-by: Tom Rini -
Commit 0a672d4 "arm: Add Prep subcommand support to bootm" re-organized
do_bootm_linux() for ARM. During the re-organization, the code to pass
the device tree to the kernel was removed. Add it back. This restores
the ability to boot a kernel using device tree.Signed-off-by: Stephen Warren
Acked-by: Tom Rini
Acked-by: Allen Martin
Tested-by: Allen Martin -
If one command fails, 'run' command should terminate and not execute
any remaining variables.Signed-off-by: Timo Ketola
Tested-by: Wolfgang Denk
Tested-by: Simon Glass
Acked-by: Simon Glass
22 Apr, 2012
1 commit
-
Also tiny style cleanup to tools/patman/README
Signed-off-by: Wolfgang Denk
21 Apr, 2012
8 commits
-
... after commit "net/miiphy/serial: drop duplicate NAMESIZE
define" (sha1:f6add13) was applied. The building of the new
LL TEMAC network driver fails with error below:xilinx_ll_temac.c: In function 'xilinx_ll_temac_initialize':
xilinx_ll_temac.c:301: error: 'NAMESIZE' undeclared (first use in this function)
xilinx_ll_temac.c:301: error: (Each undeclared identifier is reported only once
xilinx_ll_temac.c:301: error: for each function it appears in.)Signed-off-by: Stephan Linz
Acked-by: Mike Frysinger -
What is this?
=============
This tool is a Python script which:
- Creates patch directly from your branch
- Cleans them up by removing unwanted tags
- Inserts a cover letter with change lists
- Runs the patches through checkpatch.pl and its own checks
- Optionally emails them out to selected peopleIt is intended to automate patch creation and make it a less
error-prone process. It is useful for U-Boot and Linux work so far,
since it uses the checkpatch.pl script.It is configured almost entirely by tags it finds in your commits.
This means that you can work on a number of different branches at
once, and keep the settings with each branch rather than having to
git format-patch, git send-email, etc. with the correct parameters
each time. So for example if you put:in one of your commits, the series will be sent there.
See the README file for full details.
ENDSigned-off-by: Simon Glass
-
Signed-off-by: Jens Scharsig
-
Fix the warning
mmc.c: In function 'mmc_send_cmd':
mmc.c:87: warning: assignment from incompatible pointer typein case CONFIG_MMC_TRACE is enabled.
Signed-off-by: Dirk Behme
CC: Andy Fleming
Acked-by: Simon Glass
Acked-by: Marek Vasut -
This is just a patch for the problem reported here:
http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor."Looks like this is copy paste error from my side,(for port2/3 it should have been bypass
for port2/3 rather its port1 set in bypass mode)"I only submit the patch since it is missing in 2012.04-rc3 while the twister board
depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.note: the twister boards still needs an additional `usb reset`, don't know why.
U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38)
AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz
TAM3517 TWISTER Board + LPDDR/NAND
I2C: ready
DRAM: 256 MiB
NAND: 512 MiB
MMC: OMAP SD/MMC: 0
In: serial
Out: serial
Err: serial
Die ID #746c0000000000000155dc1405011024
Net: DaVinci-EMAC, smc911x-0
Hit any key to stop autoboot: 0
twister => usb start
(Re)start USB...
USB: Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
twister => usb reset
(Re)start USB...
USB: Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
twister => usb reset
(Re)start USB...
USB: Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
twister => usb reset
(Re)start USB...
USB: Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) foundSigned-off-by: Jeroen Hofstee
Acked-by: Govindraj.R ti.com>
Acked-by: Tom Rini -
Current versions of dtc always print a message like
DTC: dts->dtb on file "dt.dtb.tmp"
which cannot even be suppressed with "-qqq". To avoid incorrect
MAKEALL status, we manually filter out this message. This is a bit
complicated, as we have to make sure to set a correct return code.Also, get rid of the temp file: dtc accepts "-" for stdin.
Signed-off-by: Wolfgang Denk
Cc: Simon Glass
Acked-by: Simon Glass -
Fix: FATAL ERROR: Couldn't open "../arch/arm/dts/tegra20.dtsi": No
such file or directorySigned-off-by: Wolfgang Denk
Cc: Simon Glass
Acked-by: Simon Glass -
Fix gcc 4.6 build warnings:
onenand_base.c: In function 'onenand_probe':
onenand_base.c:2577:6: warning: variable 'maf_id' set but not used
[-Wunused-but-set-variable]Signed-off-by: Wolfgang Denk
Cc: Lukasz Majewski
Cc: Kyungmin Park
Tested-by: Lukasz Majewski
19 Apr, 2012
2 commits
-
Signed-off-by: Wolfgang Denk
-
* 'master' of git://git.denx.de/u-boot-sh:
sh: ecovec: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
sh: Fix rsk7264 pin setup for on-board ethernet
18 Apr, 2012
2 commits
-
When calling board_late_init, we need to define CONFIG_BOARD_LATE_INIT.
The latest ecovec config defines BOARD_LATE_INIT, board_late_init is not called.Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
This sets up the external ethernet IRQ pin.
Signed-off-by: Phil Edworthy
Signed-off-by: Nobuhiro Iwamatsu
17 Apr, 2012
5 commits
-
Do the same AXI cache and Qos settings done already in the
SabreLite imximage.cfg for the ARM2 board, too.It fixes a display flash issue caused by low priority of
the display IDMA channel.Signed-off-by: Dirk Behme
CC: Jason Chen
CC: Jason Liu
CC: Stefano Babic
CC: Fabio Estevam
Acked-by: Jason Liu -
Signed-off-by: Wolfgang Denk
-
* 'master' of git://git.denx.de/u-boot-arm:
ARM926EJS: Fix cache.c to comply with checkpatch.pl
ARM926EJS: Make asm routines volatile in cache ops
MX35: mx35pdk: wrong board revision
ARM1136: MX35: Make asm routines volatile in cache ops
ARM: add u-boot.imx as target for i.MX SOCs
M28: Pull out CONFIG_APBH_DMA so it's always enabled
DMA: Split the APBH DMA init into block and channel init
imx: Return gpio_set_value in gpio_direction_output
imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5)
imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
imx: Remove unneeded/repititive definitions from imx headers
i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
MX31: mx31pdk: drop enable_caches from board file
i.MX28: Fix initial stack pointer position
mx35: mx35pdk: fix when cache functions are linked
mx35: flea3: fix when cache functions are linked
ARM: 926ejs: use debug() for misaligned addresses
ARM1136: add cache flush and invalidate operations
mx6qsabrelite: Fix the serial console port
mx6qsabrelite: Add boot switch setting information into the README
i.MX6: mx6qsabrelite: add cache commands if cache is enabled
i.MX6: implement enable_caches()
i.MX6: define CACHELINE_SIZE
MX53: DDR: Fix ZQHWCTRL field TZQ_CS
mx28evk: Add a README file
mx28: Split the README into a common part and a m28 specific part
tricorder: Load kernel from ubifs
tricorder: Add UBIFS
cm-t35: fix Ethernet reset timing
hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT
BeagleBoard: Remove userbutton command and use gpio command instead
OMAP: Move omap1510inn to Unmaintained / Orphaned -
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Albert ARIBAUD -
We certainly don't want the compiler to reorganise the code for dcache flushing.
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Albert ARIBAUD
Acked-by: Mike Frysinger
Acked-by: Stefano Babic
16 Apr, 2012
17 commits
-
The board revision is detected accessing to the pmic,
that is not available before relocation (I2C).
This generates the following error:CPU: Freescale i.MX35 rev 2.0 at 532 MHz.
Reset cause: WDOG
= 7 is invalid. Should be less than 0
Board: MX35 PDK 1.0The revision number is wrong, as a default value is printed
(tested on a mx35pdk Rev. 2.0).Move the output in the board_late_init(), when
pmic can be accessed.Signed-off-by: Stefano Babic
-
As well as pushed for ARM926EJS, we certainly don't want
the compiler to reorganise the code for dcache flushing
Fix checkpatch warnings as well.Signed-off-by: Stefano Babic
CC: Marek Vasut
CC: Albert Aribaud -
Freescale SOCs require an header to u-boot.bin
The patch adds u-boot.imx to the default targets
if the imx file is set (IMX_CONFIG).Signed-off-by: Stefano Babic
Cc: Albert ARIBAUD
CC: Loïc Minier
CC: Mike Frysinger
Acked-by: Mike Frysinger
Acked-by: Dirk Behme
Tested-by: Dirk Behme -
The ABPH DMA is now used also by the SD card. Therefore it has to be enabled
even if NAND is disabled.Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel
Cc: Fabio Estevam -
This fixes the issue where mxs_dma_init() was called either twice or never,
without introducing any new init hooks.The idea is to allow each and every device using the APBH DMA block to
configure and request only the channels it uses, instead of making it call init
for all the channels as is now.The common DMA block init part, which only configures the block, is then called
from CPUs arch_cpu_init() call.NOTE: This patch depends on:
http://patchwork.ozlabs.org/patch/150957/
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel
Cc: Fabio Estevam
Tested-by: Fabio Estevam -
Return gpio_set_value in gpio_direction_output.
Earlier it returned 0 and ignored gpio_set_value's return value.Signed-off-by: Vikram Narayanan
Acked-by: Stefano Babic -
Use the defined GPIO_TO_PORT macro. Remove gpio >> 5 references.
Signed-off-by: Vikram Narayanan
Acked-by: Stefano Babic -
Add GPIO_TO_PORT macro in the mxc_gpio.c driver
Signed-off-by: Vikram Narayanan
Acked-by: Stefano Babic -
Remove gpio related unused/repititive definitions from imx headers.
Signed-off-by: Vikram Narayanan
Acked-by: Stefano Babic -
This SD DMA function of i.MX28 is still apparently too experimental to be
enabled by default in 2012.04 release. Enable this feature only if the user
plans to tinker with DCache or explicitly enables it.Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Wolfgang Denk
Cc: Detlev Zundel
Cc: Fabio Estevam -
enable_caches() is implemented now in cpu.c for
ARM1136.Signed-off-by: Stefano Babic
CC: Fabio Estevam
Acked-by: Fabio Estevam -
The patch:
m28evk: Use GENERATED_GBL_DATA_SIZE
commit 1084606c972ea5f1d89f69bdbd978b867d0ee521introduced usage of GENERATED_GBL_DATA_SIZE and calculation of initial stack
pointer position defived from that. Due to a small typo, the SP position moved
to 0x21f80, which is past the SRAM area. This didn't manifest on the real
hardware as the SRAM repeats there (address bits in the CPU being ignored).Though this was caught in QEMU, where it crashed the emulator.
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Fabio Estevam
Tested-by: Fabio Estevam -
Signed-off-by: Stefano Babic
-
Signed-off-by: Stefano Babic
-
Misaligned warnings are useful to debug faulty drivers.
A misaligned warning is printed also when the driver
is correct - use debug() instead of printf().Signed-off-by: Stefano Babic
CC: Albert Aribaud
CC: Mike Frysinger
CC: Marek Vasut
Acked-by: Marek Vasut -
Since commit 5c1ad3e6f8ae578bbe30e09652f1531e9bc22031
(net: fec_mxc: allow use with cache enabled) the FEC_MXC
driver uses flush_dcache_range() and invalidate_dcache_range()
functions. This driver is also configured for ARM1136 based
'flea3' and 'mx35pdk' boards which currently do not build
as there are no ARM1136 specific flush_dcache_range() and
invalidate_dcache_range() functions. Add various ARM1136
cache functions to fix building for 'flea3' and 'mx35pdk'.Signed-off-by: Anatolij Gustschin
Signed-off-by: Stefano Babic
Cc: Fabio Estevam
CC: Mike Frysinger
CC: Marek Vasut
Acked-by: Marek Vasut -
On mx6qsabrelite the console is ttymxc1.
Signed-off-by: Fabio Estevam
