Eric Lee / smarc-uboot

21 Nov, 2014

1 commit

  • e895a4b06   fdt: Allow ft_board_setup() to report failure ... Browse Code »

    This function can fail if the device tree runs out of space. Rather than
    silently booting with an incomplete device tree, allow the failure to be
    detected.

    Unfortunately this involves changing a lot of places in the code. I have
    not changed behvaiour to return an error where one is not currently
    returned, to avoid unexpected breakage.

    Eventually it would be nice to allow boards to register functions to be
    called to update the device tree. This would avoid all the many functions
    to do this. However it's not clear yet if this should be done using driver
    model or with a linker list. This work is left for later.

    Signed-off-by: Simon Glass
    Acked-by: Anatolij Gustschin

    Simon Glass
     

14 Sep, 2014

1 commit

  • 461be2f96   kconfig: remove redundant "string" type in arch and board Kconfigs ... Browse Code »
    43

    Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
    are specified in arch/Kconfig.

    We can delete the ones in arch and board Kconfig files.

    This commit can be easily reproduced by the following command:

    find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
    /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
    }
    '

    Signed-off-by: Masahiro Yamada

    Masahiro Yamada
     

30 Jul, 2014

2 commits

  • 93d4334f7   Add board MAINTAINERS files ... Browse Code »

    We have switched to Kconfig and the boards.cfg file is going to
    be removed. We have to retrieve the board status and maintainers
    information from it.

    The MAINTAINERS format as in Linux Kernel would be nice
    because we can crib the scripts/get_maintainer.pl script.

    After some discussion, we chose to put a MAINTAINERS file under each
    board directory, not the top-level one because we want to collect
    relevant information for a board into a single place.

    TODO:
    Modify get_maintainer.pl to scan multiple MAINTAINERS files.

    Signed-off-by: Masahiro Yamada
    Suggested-by: Tom Rini
    Acked-by: Simon Glass

    Masahiro Yamada
     
  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada
     

08 Nov, 2013

1 commit

01 Nov, 2013

1 commit

24 Jul, 2013

1 commit

12 Dec, 2011

1 commit

  • 02ab0970b   mpc5200: digsy_mtc: Fix extension board detection ... Browse Code »

    Switch to extension board detection using pci_find_device()
    instead of detecting by i2c access to EEPROM device on
    extension board.

    This is a cleaner detection method since EEPROM addresses
    can be different on different board revisions. This also
    avoids "i2c_read: failed to address chip" error messages
    in the boot log on boards without extension board which
    may confuse users.

    Signed-off-by: Anatolij Gustschin

    Anatolij Gustschin
     

16 Oct, 2011

1 commit

  • 464c79207   punt unused clean/distclean targets ... Browse Code »

    The top level Makefile does not do any recursion into subdirs when
    cleaning, so these clean/distclean targets in random arch/board dirs
    never get used. Punt them all.

    MAKEALL didn't report any errors related to this that I could see.

    Signed-off-by: Mike Frysinger

    Mike Frysinger
     

05 Aug, 2011

1 commit

29 Jul, 2011

1 commit

28 Jul, 2011

1 commit