03 Jan, 2017

2 commits

• ada832f8f   defconfigs: imx6: engicam: Enable FIT ... Browse Code »

  Enable Flattened Image Tree support for all Engicam boards.

  Cc: Stefano Babic
  Cc: Matteo Lisi
  Cc: Michael Trimarchi
  Signed-off-by: Jagan Teki

  Jagan Teki

  2017-01-03 00:34:11 +0800  
• bfd96402c   imx6: engicam: Use bootm instead of bootz ... Browse Code »

  Boot Linux with uImage instead of zImage, so update
  bootz with bootm.

  Cc: Stefano Babic
  Cc: Matteo Lisi
  Cc: Michael Trimarchi
  Signed-off-by: Jagan Teki

  Jagan Teki

  2017-01-03 00:25:05 +0800  

30 Dec, 2016

1 commit

• 187809517   Sync defconfig files by savedefconfig ... Browse Code »

  Generated by "tools/moveconfig -s".

  This will make config moves easier.

  Signed-off-by: Masahiro Yamada

  Masahiro Yamada

  2016-12-30 02:07:33 +0800  

17 Dec, 2016

3 commits

• 854bb75be   imx6: icorem6_rqs: Add FEC support ... Browse Code »

  Add FEC support for Engicam i.CoreM6 RQS modules.

  Cc: Stefano Babic
  Cc: Matteo Lisi
  Cc: Michael Trimarchi
  Signed-off-by: Jagan Teki

  Jagan Teki

  2016-12-17 01:39:06 +0800  
• dca7c2878   imx6: icorem6_rqs: Add I2C support ... Browse Code »

  Add I2C support for Engicam i.CoreM6 RQS modules.

  icorem6qdl-rqs> i2c bus
  Bus 0: i2c@021a0000
  Bus 1: i2c@021a4000
  Bus 2: i2c@021a8000
  icorem6qdl-rqs> i2c dev 0
  Setting bus to 0
  icorem6qdl-rqs> i2c speed 100000
  Setting bus speed to 100000 Hz
  icorem6qdl-rqs> i2c probe
  Valid chip addresses: 4F
  icorem6qdl-rqs> i2c md 4F 0xff
  00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
  icorem6qdl-rqs> i2c bus
  Bus 0: i2c@021a0000 (active 0)
  4f: generic_4f, offset len 1, flags 0
  Bus 1: i2c@021a4000
  Bus 2: i2c@021a8000

  Cc: Stefano Babic
  Cc: Matteo Lisi
  Cc: Michael Trimarchi
  Signed-off-by: Jagan Teki

  Jagan Teki

  2016-12-17 01:39:05 +0800  
• 6121a54d6   arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support ... Browse Code »

  Boot from MMC:
  -------------
  U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07)
  Trying to boot from MMC1

  U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07 +0530)

  CPU: Freescale i.MX6DL rev1.3 at 792 MHz
  Reset cause: POR
  Model: Engicam i.CoreM6 DualLite/Solo RQS Starter Kit
  DRAM: 512 MiB
  MMC: FSL_SDHC: 0
  *** Warning - bad CRC, using default environment

  In: serial
  Out: serial
  Err: serial
  Net: CPU Net Initialization Failed
  No ethernet found.
  Hit any key to stop autoboot: 0
  icorem6qdl-rqs>

  Cc: Stefano Babic
  Cc: Matteo Lisi
  Cc: Michael Trimarchi
  Signed-off-by: Jagan Teki

  Jagan Teki

  2016-12-17 00:16:10 +0800