Eric Lee / smarc-uboot

23 Jan, 2020

1 commit

21 Nov, 2019

2 commits

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     
  • 8d8ee47e0   env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol ... Browse Code »
    24

    Today in initr_reloc_global_data() we use some non-obvious tests to
    determine if we need to relocate the env_addr within gd or not. In
    order to facilitate migration of other symbols to Kconfig we need to
    introduce a new symbol for this particular use case.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Signed-off-by: Tom Rini

    Tom Rini
     

08 Nov, 2019

1 commit

04 Nov, 2019

1 commit

  • 05737f358   imx: update i.MX8MQ device trees ... Browse Code »

    This updates the i.MX8MQ device trees and, necessarily, also the
    i.MX8MQ clock bindings. These are taken verbatim from from the
    Linux kernel version v5.4-rc2, which three small changes which
    were already part of the previous device tree:

    * Keep the PSCI reserved memory range
    * Keep the alias for ethernet, so that the MAC address can be set
    * Keep the modified #include for the IOMUXC pins

    Signed-off-by: Patrick Wildt
    Acked-by: Peng Fan

    Patrick Wildt
     

08 Oct, 2019

3 commits

05 Oct, 2019

1 commit

23 Sep, 2019

1 commit

24 Aug, 2019

1 commit

14 Aug, 2019

1 commit

23 Jun, 2019

2 commits

21 Jun, 2019

1 commit

27 May, 2019

1 commit

18 May, 2019

1 commit

  • 100150254   CONFIG_SPL_SYS_[DI]CACHE_OFF: add ... Browse Code »

    While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
    where these configuration items are conditional on SPL. This commit adds SPL
    variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
    the configurations as required.

    Acked-by: Alexey Brodkin
    Signed-off-by: Trevor Woerner
    [trini: Make the default depend on the setting for full U-Boot, update
    more zynq hardware]
    Signed-off-by: Tom Rini

    Trevor Woerner
     

05 May, 2019

1 commit

  • 623de3f08   Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_SUPPORT_EMMC_BOOT

    As requested by Michal Simek , these boards
    have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:

    xilinx_zynqmp_zc1275_revB
    xilinx_zynqmp_zc1751_xm018_dc4
    xilinx_zynqmp_zc1751_xm019_dc5
    xilinx_zynqmp_zcu100_revC
    xilinx_zynqmp_zcu102_rev1_0
    xilinx_zynqmp_zcu102_revA
    xilinx_zynqmp_zcu102_revB
    xilinx_zynqmp_zcu104_revA
    xilinx_zynqmp_zcu104_revC
    xilinx_zynqmp_zcu106_revA
    xilinx_zynqmp_zcu111_revA

    Signed-off-by: Alex Kiernan
    Acked-by: Lukasz Majewski
    Acked-by: Patrick Delaunay
    Acked-by: Ramon Fried
    Reviewed-by: Andy Shevchenko
    Tested-by: Sébastien Szymanski

    Alex Kiernan
     

30 Apr, 2019

1 commit

13 Mar, 2019

2 commits

  • 15b7e91f5   imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to Kconfig ... Browse Code »

    Currently the command "saveenv" is not available.

    The CONFIG_ENV_IS_IN_MMC symbol has been converted to Kconfig,
    so fix the problem by moving it to the defconfig.

    Signed-off-by: Fabio Estevam
    Reviewed-by: Peng Fan

    Fabio Estevam
     
  • 61adaf25c   imx8mq_evk_defconfig: Enable pinctrl driver ... Browse Code »

    The Ethernet controller is not able to initialise correctly without the
    pinctrl driver.

    This config setting was enabled in the initial version of this file,
    but was removed by a savedefconfig resync because the parameter did not
    actually exist at that point.

    Fixes: 1bac199e8c87 ("configs: Resync with savedefconfig")
    Signed-off-by: Chris Spencer
    Reviewed-by: Fabio Estevam

    Chris Spencer
     

19 Jan, 2019

1 commit

15 Jan, 2019

1 commit

  • 789ee25de   imx8mq_evk_defconfig: Move file system options to Kconfig ... Browse Code »

    Chris Spencer reports that when enabling ext4 read support without
    also enabling write support the following error is seen:

    fs/fs.c:198:12: error: 'ext4_write_file' undeclared here (not in a
    function); did you mean 'ext4_read_file'?
    .write = ext4_write_file,
    ^~~~~~~~~~~~~~~
    Fix this problem by moving these options to Kconfig.

    Reported-by: Chris Spencer
    Acked-by: Peng Fan
    Signed-off-by: Fabio Estevam

    Fabio Estevam
     

08 Jan, 2019

1 commit

01 Jan, 2019

1 commit

  • 86ac7a9a5   imx: add i.MX8MQ EVK support ... Browse Code »

    Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy
    firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to
    DRAM.

    The boot log with Arm trusted firmware console enabled:
    "
    U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
    PMIC: PFUZE100 ID=0x10
    Normal Boot
    Trying to boot from MMC2
    NOTICE: Configureing TZASC380
    NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty
    NOTICE: BL31: Built : 09:28:54, Nov 8 2018
    lpddr4 swffc start
    NOTICE: sip svc init

    U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)

    CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz
    Reset cause: POR
    Model: Freescale i.MX8MQ EVK
    DRAM: 3 GiB
    MMC: FSL_SDHC: 0, FSL_SDHC: 1
    In: serial
    Out: serial
    Err: serial
    Net:
    Warning: ethernet@30be0000 using MAC address from ROM
    eth0: ethernet@30be0000
    Hit any key to stop autoboot: 0
    "

    Signed-off-by: Peng Fan
    Cc: Fabio Estevam
    Cc: Stefano Babic

    Peng Fan