Eric Lee / smarc-uboot

04 Dec, 2019

1 commit

21 Nov, 2019

1 commit

  • a09fea1d2   env: Finish migration of common ENV options ... Browse Code »
    1

    - In ARMv8 NXP Layerscape platforms we also need to make use of
    CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
    - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
    to 0.
    - Add Kconfig entry for ENV_ADDR.
    - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
    - Add ENV_xxx_REDUND options that depend on their primary option and
    SYS_REDUNDAND_ENVIRONMENT
    - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
    for the pre-main-U-Boot environment location.
    - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
    rather it being non-zero, as it will now be zero by default.
    - Rework the env_offset absolute in env/embedded.o to not use
    CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
    ENV_IS_IN_FLASH.
    - Migrate all platforms.

    Cc: Wolfgang Denk
    Cc: Joe Hershberger
    Cc: Patrick Delaunay
    Cc: uboot-stm32@st-md-mailman.stormreply.com
    Signed-off-by: Tom Rini
    Acked-by: Joe Hershberger
    Reviewed-by: Simon Goldschmidt

    Tom Rini
     

26 Aug, 2019

1 commit

  • 97605d3ca   ARM: omap3_logic: Fix SPL boot failure when EHCI enabled ... Browse Code »

    Some of the USB code is still being built into SPL even when the
    SPL menu options have it explicitly disabled for SPL. Unit there is
    a better solution, This patch undefines CONFIG_USB_EHCI_OMAP when
    building SPL which reduces the code and lets the board boot again.

    Fixes: 25e4ff45b17d ("ARM: omap3_logic: Enable OMAP EHCI support
    for SOM-LV Boards")

    Signed-off-by: Adam Ford

    Adam Ford
     

02 Aug, 2019

2 commits

28 Jul, 2019

1 commit

09 Jul, 2019

1 commit

  • a9221f3eb   at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs ... Browse Code »
    12

    Enable the extended ENV options for AT91 and OMAP2PLUS in order to be
    able to use CONFIG_ENV_UBI_* on these architectures.

    As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE,
    ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to
    KConfig.

    This migration was run using an extended moveconfig.py which evaluates
    expressions such as "(512 << 10)". See patch ("moveconfig: expand
    simple expressions").

    All modified boards were built with SOURCE_DATE_EPOCH=0 before and
    after the change and successfully confirmed that the identical binary
    is generated (the only exception was igep00x0, which does not define
    CONFIG_ENV_IS_IN_UBI in the original board header. Once that is
    defined, the test passes too).

    hs: rebased patch to:
    68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT"

    Signed-off-by: Markus Klotzbuecher
    Cc: Heiko Schocher
    Cc: Eugen Hristev
    Cc: Tom Rini

    Markus Klotzbuecher
     

01 May, 2019

1 commit

30 Apr, 2019

1 commit

25 Apr, 2019

1 commit

22 Oct, 2018

1 commit

  • 290097fe2   ARM: omap3_logic: Add NOR Flash Support for SOM-LV ... Browse Code »

    The DM37 and OMAP35 SOM-LV SOM-LV products both support a NOR
    flash part connected to CS2 in addition to the NAND part on CS0.
    This patch setups the GPMC timings for the MT28 NOR Flash and
    enables the CFI-Flash driver now that the CFI stuff is in Kconfig

    Signed-off-by: Adam Ford

    Adam Ford
     

07 Oct, 2018

1 commit

18 Aug, 2018

1 commit

17 Aug, 2018

1 commit

  • 86cf1c828   configs: Migrate CONFIG_NR_DRAM_BANKS ... Browse Code »
    13

    We have the following cases:
    - CONFIG_NR_DRAM_BANKS was defined, migrate normally
    - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
    CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
    - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
    2), set this to 8.

    Signed-off-by: Tom Rini

    Tom Rini
     

11 Aug, 2018

1 commit

04 Aug, 2018

1 commit

  • bdaf24f8a   ti_omap3_common: Add CONFIG_SYS_NS16550_COMx entries ... Browse Code »

    Several boards do not use the default UART3, so they do a check
    for ifdef CONFIG_SPL_BUILD and enable the pointer for
    CONFIG_SYS_NS16550_COMx to point to OMAP34XX_UARTx.

    Let's consoldate this all into one place, and remove them from the
    individual boards.

    Signed-off-by: Adam Ford

    Adam Ford
     

23 Jul, 2018

1 commit

11 Jul, 2018

1 commit

  • e745782c2   omap3_logic: Change console from ttyO0 to ttyS0 ... Browse Code »

    Newer kernels have moved from ttyO0 to ttyS0, and when booting
    it drops a notice:

    WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
    This ensures that you still see kernel messages. Please
    update your kernel commandline.

    This patch updates the console to use ttyS0 and eliminate the
    chatter.

    Signed-off-by: Adam Ford

    Adam Ford
     

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    56

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

07 Apr, 2018

1 commit

16 Mar, 2018

1 commit

  • 6f6b7cfa8   Convert all of CONFIG_CONS_INDEX to Kconfig ... Browse Code »
    14

    This converts the following to Kconfig:
    CONFIG_CONS_INDEX

    We have existing entries for this option in a number of places, with
    different guards on them. They're also sometimes used for things not
    directly inside of the serial driver. First, introduce a new symbol to
    guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
    need this for the serial driver, but for some other use, we can still do
    it. Next, consolidate all of these into the single entry in
    drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that
    we can imply a correct value here to make the defconfig side of this
    smaller.

    Signed-off-by: Adam Ford
    [trini: Rework a lot of the logic here, such that I took authorship from
    Adam, but kept his S-o-B line]
    Signed-off-by: Tom Rini

    Tom Rini
     

05 Mar, 2018

1 commit

15 Feb, 2018

1 commit

  • 75670c81e   configs: Migrate CONFIG_SPL_FRAMEWORK ... Browse Code »

    Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the
    current set of options we have in Kconfig. We will need to have some
    options available for SPL and !SPL_FRAMEWORK so this is important. In a
    few cases we re-order existing options so that we have less escapes from
    the SPL_FRAMEWORK guard.

    Signed-off-by: Tom Rini

    Tom Rini
     

23 Jan, 2018

3 commits

13 Dec, 2017

1 commit

06 Nov, 2017

1 commit

21 Oct, 2017

2 commits

  • 8daec2d9d   net: Add SMC911X driver to Kconfig, convert ... Browse Code »

    We add the various SMC91XX symbols to drivers/net/Kconfig and then this
    converts the following to Kconfig:
    CONFIG_SMC911X
    CONFIG_SMC911X_BASE
    CONFIG_SMC911X_16_BIT
    CONFIG_SMC911X_32_BIT

    Signed-off-by: Adam Ford
    [trini: Apply to the rest of the tree, re-squash old and new patch]
    Signed-off-by: Tom Rini

    Adam Ford
     
  • 0a9ef4515   Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig ... Browse Code »

    This converts the following to Kconfig:
    CONFIG_NAND_MXC
    CONFIG_NAND_OMAP_GPMC
    CONFIG_NAND_OMAP_GPMC_PREFETCH
    CONFIG_NAND_OMAP_ELM
    CONFIG_SPL_NAND_AM33XX_BCH
    CONFIG_SPL_NAND_SIMPLE
    CONFIG_SYS_NAND_BUSWIDTH_16BIT

    Signed-off-by: Adam Ford
    Reviewed-by: Heiko Schocher
    [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues,
    add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT]
    Signed-off-by: Tom Rini

    Adam Ford
     

04 Oct, 2017

1 commit

13 Sep, 2017

1 commit

08 Sep, 2017

1 commit

02 Sep, 2017

4 commits

17 Aug, 2017

1 commit

12 Aug, 2017

2 commits