09 Aug, 2014
1 commit
-
MAINTAINERS contains all currently known custodians based on
infos from wiki [1] and u-boot git forks [2].[1] http://www.denx.de/wiki/U-Boot/Custodians
[2] http://git.denx.de/?p=u-boot.git;a=forksSigned-off-by: Daniel Schwierzeck
12 Sep, 2013
1 commit
-
Put all informations about targets, including state (active or
orphan) and maintainers, in boards.cfg; remove MAINTAINERS;
adjust the build system accordingly.Signed-off-by: Albert ARIBAUD
11 Sep, 2013
1 commit
-
Conflicts:
tools/Makefile
04 Sep, 2013
1 commit
30 Aug, 2013
1 commit
-
Arndale board is based on samsung's exynos5250 soc.
Signed-off-by: Inderpal Singh
Signed-off-by: Chander Kashyap
Signed-off-by: Minkyu Kang
28 Aug, 2013
1 commit
-
add support for the am335x based boards from siemens:
dxr2:
- DDR3 128MiB
- NAND 256MiB
- Ethernet with external Switch SMSC LAN9303
- no PMIC
- internal Watchdog
- DFU supportpxm2:
- DDR2 512 MiB
- NAND 1024 MiB
- PMIC
- PHY atheros ar803x
- USB Host
- internal Watchdog
- DFU supportrut:
- DDR3 256 MiB
- NAND 256 MiB
- PMIC
- PHY natsemi dp83630
- external Watchdog
- DFU supportSigned-off-by: Heiko Schocher
Signed-off-by: Roger Meier
Signed-off-by: Samuel Egli
Cc: Pascal Bach
Cc: Tom Rini
20 Aug, 2013
1 commit
-
This board and especially the CPU (PPC405CR) is EOL.
Signed-off-by: Matthias Fuchs
Acked-by: Wolfgang Denk
19 Aug, 2013
1 commit
-
Fixup an easy conflict over adding the clk_get prototype and USB_OTG
defines for am33xx having moved.Conflicts:
arch/arm/include/asm/arch-am33xx/hardware.hSigned-off-by: Tom Rini
18 Aug, 2013
1 commit
16 Aug, 2013
2 commits
-
Signed-off-by: Antoine Tenart
[trini: Change to SPDX, fix a few compiler warnings, adapt to
CONFIG_OMAP_COMMON]
Signed-off-by: Tom Rini -
add the am1808 based ipam390 board from Barix.
- 128MByte, DDR2, synchronous RAM 16bit databus to SDRAM
interface
- 128MByte, NAND Flash, 8bit databus to the NANDFlash
Interface
- Ethernet PHY Micrel KSZ8051R via RMII
- Console on UART 0
- booting fron nand flash
- spl falcon bootmodeSigned-off-by: Heiko Schocher
Cc: Tom Rini
13 Aug, 2013
1 commit
10 Aug, 2013
2 commits
-
C29XPCIE board is a series of Freescale PCIe add-in cards to perform
as public key crypto accelerator or secure key management module. It
includes C293PCIE board, C293PCIE board and C291PCIE board.- 512KB platform SRAM in addition to 512K L2 Cache/SRAM
- 512MB soldered DDR3 32bit memory
- CPLD System Logic
- 64MB x16 NOR flash and 4GB x8 NAND flash
- 16MB SPI flashSigned-off-by: Mingkai Hu
Singed-off-by: Po Liu
[yorksun: Fixup include/configs/C29XPCIE.h]
Signed-off-by: York Sun -
Add emulator support for T4240. Emulator has limited peripherals and
interfaces. Difference between emulator and T4240QDS includes:
ECC for DDR is disabled due the procedure to load images
No board FPGA (QIXIS)
NOR flash has 32-bit port for higher loading speed
IFC and I2C timing don't really matter, so set them fast
No ethernetSigned-off-by: York Sun
09 Aug, 2013
1 commit
-
Signed-off-by: Andes
Cc: Macpaul Lin
Cc: Kuan-Yu Kuo
26 Jul, 2013
1 commit
-
mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's avoid the
code duplication and only use the nitrogen6x source code to make board code
maintainance easier.Tested booting a mainline device tree kernel on a mx6qsabrelite board.
Signed-off-by: Fabio Estevam
17 Jul, 2013
1 commit
-
The gdsys ControlCenter Digital board is based on a Freescale P1022 QorIQ SOC.
It boots from SPI-Flash but can be configured to boot from SD-card for
factory programming and testing.
On board peripherals include:
- 2x GbE
- Lattice ECP3 FPGA connected via PCIe
- mSATA RAID1
- USB host
- DisplayPort video output
- Atmel TPMSigned-off-by: Dirk Eibach
Signed-off-by: Reinhard Pfau
Signed-off-by: Andy Fleming
15 Jul, 2013
1 commit
-
The files board/qi/qi_lb60/qi_lb60.c and include/configs/qi_lb60.h were
licensed under the GPL v3 or later, and not v2 or later. As this is
incompatible with the project, revert this board support until the
responsible parties are available to re-license (if so desired) under
GPL v2.Signed-off-by: Tom Rini
28 Jun, 2013
2 commits
-
Signed-off-by: Fabio Estevam
Acked-by: Otavio Salvador
26 Jun, 2013
1 commit
-
The SabreSD platform is available with i.MX6Q or i.MX6DL. This patch adds the
support of the i.MX6DL. The config file and the board directory are renamed
to remove the reference to the MX6Q.Signed-off-by: Pierre Aubert
CC: Stefano Babic
Reviewed-by: Fabio Estevam
22 Jun, 2013
1 commit
-
This patch adds support for the Palm Treo 680 smartphone. A quick overview of
u-boot implementation on the treo 680...The treo 680 has a Diskonchip G4 nand flash chip. This device has a 2k region
that maps to the system bus at the reset vector in a NOR-like fashion so that it
can be used as the boot device. The phone is shipped with this 2k region
configured as write-protected (can't be modified) and programmed with an initial
program loader (IPL). At power-up, this IPL loads the contents of two flash
blocks to SDRAM and jumps to it. The capacity of the two blocks is not large
enough to hold all of u-boot, so a u-boot SPL is used. To conserve flash space,
these two blocks and the necessary number of subsequent blocks are programmed
with a concatenated spl + u-boot image. That way, the IPL will also load a
portion of u-boot proper, and when the spl runs, it relocates the portion of
u-boot that the IPL has already loaded, and then resumes loading the remaining
part of u-boot before jumping to it.The default_environment is used (CONFIG_ENV_IS_NOWHERE) because I didn't think
that having a writable environment was worth the cost of a flash block, although
adding it would be straightforward. I abuse the CONFIG_EXTRA_ENV_SETTINGS
option to specify the usbtty for the console (CONFIG_SYS_CONSOLE_IS_IN_ENV).Support for the LCD is included, but currently it is only useful for displaying
the u-boot splash screen. But if u-boot is built without the usbtty console, it
does display the auto-boot progress nicely.Signed-off-by: Mike Dunn
13 Jun, 2013
1 commit
-
LP-8x4x is a programmable automation controller by ICP DAS. It is
shipped with outdated U-Boot v1.3.0This patch adds enough supports to boot the board:
- 128M of 128M SDRAM
- 32M of 48M NOR Flash memory
- 1 of 4 Serial consoles (PXA FFUART)
- 2 of 2 Ethernet controllers (DM9000)Signed-off-by: Sergey Yanovich
Series-to: u-boot
Series-cc: marex
10 Jun, 2013
2 commits
-
Adding Maintainer for DRA7xx.
Signed-off-by: Lokesh Vutla
-
The omap2420H4 was the only mainline omap24xx board. Prior to being
fixed by Jon Hunter in time for v2013.04 it had been functionally broken
for a very long time. Remove this board as there's not been interest in
it in U-Boot for quite a long time.Signed-off-by: Tom Rini
08 Jun, 2013
1 commit
-
Conflicts:
drivers/serial/Makefile
04 Jun, 2013
1 commit
-
Add minimal support (only boot from mmc device) for the Congatec
Conga-QEVAl Evaluation Carrier Board with conga-Qmx6q (i.MX6 Quad
processor) module.Signed-off-by: Leo Sartre
Acked-by: Stefano Babic
Acked-by: Otavio Salvador
03 Jun, 2013
1 commit
-
VF610TWR is a board based on Vybrid VF610 SoC.
This patch adds basic support for Vybrid VF610TWR board.
Signed-off-by: Alison Wang
Signed-off-by: Jason Jin
Signed-off-by: TsiChung Liew
Reviewed-by: Benoît Thébaudeau
30 May, 2013
1 commit
-
Conflicts:
common/cmd_fpga.c
drivers/usb/host/ohci-at91.c
23 May, 2013
3 commits
-
Add Seagate GoFlex Home support
Start with dockstar configuration
define support for RTC, DATE, SATA and EXT4FSSigned-off-by: Suriyan Ramasami
-
This patch creates a new config for the A5 dual core tile that includes the
generic config for the Versatile Express platform.The generic config has been modified to provide support for the Extended
Memory Map, as used on the A5 core tile. A5 does not support the legacy
memory map.Signed-off-by: Ryan Harkin
Signed-off-by: Andre Przywara -
The current ca9x4_ct_vxp platform contains support for a Versatile
Express motherboard with a quad core A9 core tile.This patch separates the Versatile Express motherboard code and the
A9 specific code, to ease supporting more core tiles in the next
patches.Andre: merged the first two of Ryan's original patches and did some
checkpatch fixes.Signed-off-by: Ryan Harkin
Signed-off-by: Andre Przywara
21 May, 2013
1 commit
-
Add sama5d3xek support with following feature
- boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector
- boot from SPI flash support
- boot from SD card support
- LCD support
- EMAC support
- USB OHCI supportSigned-off-by: Bo Shen
Signed-off-by: Andreas Bießmann
18 May, 2013
2 commits
-
This currently has no maintainer listed.
Signed-off-by: Simon Glass
-
This still shows the previous maintainer.
Signed-off-by: Simon Glass
12 May, 2013
2 commits
-
Add support for following features:
- nand boot, with PMECC 2bit ECC for 512 bytes sector
- SPI flash boot
- SD card boot
- LCD supportSigned-off-by: Josh Wu
[fix -Wimplicit-function-declaration for at91_lcd_hw_init()]
Signed-off-by: Andreas Bießmann
10 May, 2013
2 commits
-
"cm-t35" in U-Boot source code is called "cm_t35".
Make the change "cm-t35" -> "cm_t35" for better greppability.Signed-off-by: Igor Grinberg
-
The IGEP COM AQUILA and CYGNUS are industrial processors modules with
following highlights:o AM3352/AM3354 Texas Instruments processor
o Cortex-A8 ARM CPU
o 3.3 volts Inputs / Outputs use industrial
o 256 MB DDR3 SDRAM / 128 Megabytes FLASH
o MicroSD card reader on-board
o Ethernet controller on-board
o JTAG debug connector available
o Designed for industrial range purposesSigned-off-by: Enric Balletbo i Serra
05 May, 2013
1 commit
-
Add basic support for the DENX M53EVK board. Currently supported is:
MMC (incl. booting)
NAND (incl. booting)
Ethernet, I2C, USB, SATA, RTC.Signed-off-by: Marek Vasut
Cc: Albert ARIBAUD
Cc: Benoît Thébaudeau
Cc: Fabio Estevam
Cc: Scott Wood
Cc: Stefano Babic
Cc: Tom Rini
Cc: Wolfgang Denk