Eric Lee / smarc-uboot

07 May, 2018

1 commit

  • 83d290c56   SPDX: Convert all of our single license tags to Linux Kernel style ... Browse Code »
    56

    When U-Boot started using SPDX tags we were among the early adopters and
    there weren't a lot of other examples to borrow from. So we picked the
    area of the file that usually had a full license text and replaced it
    with an appropriate SPDX-License-Identifier: entry. Since then, the
    Linux Kernel has adopted SPDX tags and they place it as the very first
    line in a file (except where shebangs are used, then it's second line)
    and with slightly different comment styles than us.

    In part due to community overlap, in part due to better tag visibility
    and in part for other minor reasons, switch over to that style.

    This commit changes all instances where we have a single declared
    license in the tag as both the before and after are identical in tag
    contents. There's also a few places where I found we did not have a tag
    and have introduced one.

    Signed-off-by: Tom Rini

    Tom Rini
     

16 Aug, 2017

2 commits

  • 00caae6d4   env: Rename getenv/_f() to env_get() ... Browse Code »

    We are now using an env_ prefix for environment functions. Rename these
    two functions for consistency. Also add function comments in common.h.

    Quite a few places use getenv() in a condition context, provoking a
    warning from checkpatch. These are fixed up in this patch also.

    Suggested-by: Wolfgang Denk
    Signed-off-by: Simon Glass

    Simon Glass
     
  • 382bee57f   env: Rename setenv() to env_set() ... Browse Code »

    We are now using an env_ prefix for environment functions. Rename setenv()
    for consistency. Also add function comments in common.h.

    Suggested-by: Wolfgang Denk
    Signed-off-by: Simon Glass

    Simon Glass
     

12 Jul, 2017

2 commits

19 Jan, 2016

1 commit

  • 5b8031ccb   Add more SPDX-License-Identifier tags ... Browse Code »
    40

    In a number of places we had wordings of the GPL (or LGPL in a few
    cases) license text that were split in such a way that it wasn't caught
    previously. Convert all of these to the correct SPDX-License-Identifier
    tag.

    Signed-off-by: Tom Rini

    Tom Rini
     

13 Aug, 2015

1 commit

  • 32b4a8a2a   ARM: highbank: remove DRAM bank setup ... Browse Code »

    On the highbank platform the SoC's management controller firmware
    will probe the DRAM modules and populates the initial device tree with
    the correct values. Therefore the memory sizes in the DT are already
    correct, so remove U-Boot's DRAM bank setup so the memory node is not
    "fixed up" by u-boot.

    Signed-off-by: Rob Herring
    Signed-off-by: Andre Przywara

    Rob Herring
     

15 Jun, 2015

1 commit

  • ef51c416b   highbank: add custom ahci_link_up function ... Browse Code »

    The Calxeda highbank SOC needs a custom sequence to bring up SATA links,
    so override ahci_link_up with custom function to handle combophy setup.

    Signed-off-by: Mark Langsdorf
    Signed-off-by: Richard Gibbs
    Signed-off-by: Rob Herring
    Signed-off-by: Andre Przywara

    Mark Langsdorf
     

13 Jun, 2015

2 commits

19 Apr, 2015

1 commit

  • 9efaca3e8   ahci: mmio_base is a virtual address ... Browse Code »

    Don't store it in a u32.

    Don't dereference the bus address as if it were a virtual address
    (fixes 284231e49a2b4 ("ahci: Support splitting of read transactions
    into multiple chunks")).

    Fixes crash on boot in MPC8641HPCN_36BIT target.

    Signed-off-by: Scott Wood
    Cc: Vadim Bendebury
    Acked-by: York Sun

    Scott Wood
     

21 Nov, 2014

1 commit

  • e895a4b06   fdt: Allow ft_board_setup() to report failure ... Browse Code »

    This function can fail if the device tree runs out of space. Rather than
    silently booting with an incomplete device tree, allow the failure to be
    detected.

    Unfortunately this involves changing a lot of places in the code. I have
    not changed behvaiour to return an error where one is not currently
    returned, to avoid unexpected breakage.

    Eventually it would be nice to allow boards to register functions to be
    called to update the device tree. This would avoid all the many functions
    to do this. However it's not clear yet if this should be done using driver
    model or with a linker list. This work is left for later.

    Signed-off-by: Simon Glass
    Acked-by: Anatolij Gustschin

    Simon Glass
     

31 Aug, 2014

1 commit

30 Jul, 2014

2 commits

  • 93d4334f7   Add board MAINTAINERS files ... Browse Code »

    We have switched to Kconfig and the boards.cfg file is going to
    be removed. We have to retrieve the board status and maintainers
    information from it.

    The MAINTAINERS format as in Linux Kernel would be nice
    because we can crib the scripts/get_maintainer.pl script.

    After some discussion, we chose to put a MAINTAINERS file under each
    board directory, not the top-level one because we want to collect
    relevant information for a board into a single place.

    TODO:
    Modify get_maintainer.pl to scan multiple MAINTAINERS files.

    Signed-off-by: Masahiro Yamada
    Suggested-by: Tom Rini
    Acked-by: Simon Glass

    Masahiro Yamada
     
  • dd84058d2   kconfig: add board Kconfig and defconfig files ... Browse Code »

    This commit adds:
    - arch/${ARCH}/Kconfig
    provide a menu to select target boards
    - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
    - configs/${TARGET_BOARD}_defconfig
    default setting of each board

    (This commit was automatically generated by a conversion script
    based on boards.cfg)

    In Linux Kernel, defconfig files are located under
    arch/${ARCH}/configs/ directory.
    It works in Linux Kernel since ARCH is always given from the
    command line for cross compile.

    But in U-Boot, ARCH is not given from the command line.
    Which means we cannot know ARCH until the board configuration is done.
    That is why all the "*_defconfig" files should be gathered into a
    single directory ./configs/.

    Signed-off-by: Masahiro Yamada
    Acked-by: Simon Glass

    Masahiro Yamada
     

11 Mar, 2014

1 commit

05 Mar, 2014

1 commit

  • 1ace40223   sizes.h - consolidate for all architectures ... Browse Code »

    Copied from Linux sources "include/linux/sizes.h" commit
    413541dd66d51f791a0b169d9b9014e4f56be13c

    Signed-off-by: Alexey Brodkin

    Cc: Vineet Gupta
    Cc: Tom Rini
    Cc: Stefan Roese
    Cc: Albert Aribaud
    Acked-by: Tom Rini
    Acked-by: Stefan Roese
    [trini: Add bcm Kona platforms to the patch]
    Signed-off-by: Tom Rini

    Alexey Brodkin
     

01 Nov, 2013

1 commit

25 Jul, 2013

3 commits

24 Jul, 2013

1 commit

03 Feb, 2013

1 commit

29 Mar, 2012

4 commits

06 Jan, 2012

1 commit

28 Oct, 2011

1 commit