23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
05 Dec, 2019
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
In some files, options of CMD_NAND are selected but not the command
itself. Fix this inconsistency.Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon
04 Dec, 2019
2 commits
-
Like in Linux, just use CONFIG_MTD to compile the MTD stack.
Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon -
Add more clarity by changing the Kconfig entry name.
Signed-off-by: Miquel Raynal
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini
Reviewed-by: Boris Brezillon
21 Nov, 2019
1 commit
-
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not. In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.Cc: Wolfgang Denk
Cc: Joe Hershberger
Signed-off-by: Tom Rini
24 Oct, 2019
1 commit
-
The commit 4b0bcfa7c4ec ("Kconfig: Migrate CONFIG_BOOTM_* options")
moved BOOTM_ options to Kconfig that's why align zynq defconfig with it.Disabling NETBSD was done by commit d6f48ea5ce18
("ARM: zynq: Do not enable NETBSD support by default").Signed-off-by: Michal Simek
08 Oct, 2019
1 commit
-
All boards are using the same prompt that's why add it as default value to
Kconfig to simplify defconfigs.Signed-off-by: Michal Simek
02 Aug, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_USE_PREBOOT
CONFIG_PREBOOTBoth are together in one commit, since otherwise the former causes kconfig
to define the latter, which gives duplicate symbol errors.Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the
backslash lands in the wrong place. Similarly with socfpga_vining_fpga.Signed-off-by: Simon Glass
12 Jul, 2019
1 commit
-
The name CONFIG_LEGACY_IMAGE_FORMAT reads slightly better along with
allowing us to avoid a rather nasty Kbuild/Kconfig issue down the line
with CONFIG_IS_ENABLED(IMAGE_FORMAT_LEGACY). In a few places outside of
cmd/ switch to using CONFIG_IS_ENABLED() to test what is set.Signed-off-by: Tom Rini
15 Jun, 2019
1 commit
-
In order to migrate this symbol to Kconfig introduce a new symbol to
guard it, CONFIG_SYS_CUSTOM_LDSCRIPT. When that is set we can then
provide the exact final location o the script.Signed-off-by: Tom Rini
18 May, 2019
1 commit
-
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.Acked-by: Alexey Brodkin
Signed-off-by: Trevor Woerner
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini
30 Apr, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
14 Feb, 2019
1 commit
-
This patch is doing two things.
1. Exchanging order of boot commands. distro_bootcmd is run first
followed by Xilinx boot command.
2. Remove CONFIG_BOOTCOMMAND from configs (and follow mainline) by
creating Xilinx distribution bootcommand and wiring it as the last
bootcommand.QSPI, NAND distribution boot command will be added later.
Signed-off-by: Michal Simek
01 Feb, 2019
1 commit
-
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so
obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both
SPL and U-Boot.Signed-off-by: Tien Fong Chee
Reviewed-by: Simon Goldschmidt
Reviewed-by: Tom Rini
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
23 Jul, 2018
1 commit
-
This converts the following to Kconfig:
CONFIG_MTD_PARTITIONS
CONFIG_MTD_DEVICESigned-off-by: Adam Ford
04 Jun, 2018
1 commit
-
CONFIG_DEBUG_UART_BASE and CONFIG_DEBUG_UART_CLOCK have changed that's
why this sync.Signed-off-by: Michal Simek
11 May, 2018
1 commit
-
Now that showing silicon version is part of the CPU
info display, let's remove checkboard().Note that the generic show_board_info() will still
show the DT 'model' property. For instance:U-Boot 2018.05-rc2-00025-g611b3ee0159b (Apr 19 2018 - 11:23:12 +0200)
CPU: Zynq 7z045
Silicon: v1.0
Model: Zynq ZC706 Development Board
I2C: readyBased on patches from Ariel D'Alessandro ,
and Ezequiel Garciamini configuration doesn't need to show this information.
Signed-off-by: Michal Simek
28 Apr, 2018
1 commit
-
This converts IMAGE_FORMAT_LEGACY to Kconfig
Signed-off-by: Alex Kiernan
Reviewed-by: Tom Rini
23 Apr, 2018
1 commit
-
x8 and x16 configurations should be in sync.
Signed-off-by: Michal Simek
17 Apr, 2018
1 commit
-
We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
could load distro images that usually get shipped as iso images. These images
usually come with a board agnostic boot environment.However, there is very little point in having ISO support enabled (for anyone
really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
is board specific. So the fact that we enable ISO support in U-Boot proper does
not mean at all that we want ISO support in U-Boot SPL.Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
all those default configs that disabled SPL ISO support.Signed-off-by: Alexander Graf
23 Mar, 2018
3 commits
-
Use appended dtb which is default option for zynq boards.
Signed-off-by: Michal Simek
-
The same command should be used for x16 configuration.
Signed-off-by: Michal Simek
-
Make defconfigs up2date with current location.
Signed-off-by: Michal Simek
10 Mar, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
01 Mar, 2018
1 commit
-
This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the
values over to the defconfigs.Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
28 Feb, 2018
1 commit
-
Enable networking command only when NET is enabled.
And remove selecting NET for CMD_NETSigned-off-by: Michal Simek
Signed-off-by: Tom Rini
23 Feb, 2018
1 commit
-
A number of platforms include config_distro_defaults.h but do not enable
CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and
re-sync config files.Signed-off-by: Tom Rini
11 Feb, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
30 Jan, 2018
1 commit
-
zc770-xm011 is x8 width configuration. This FMC card has also x16
variant which requires different ps7_init configuration. This patch adds
it.Signed-off-by: Michal Simek