27 Aug, 2013
18 commits
-
i2c dev command does not work anymore for legacy drivers
because a check is executed that is valid only
in the new framework.Signed-off-by: Heiko Schocher
Tested-by: Stefano Babic -
TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.
My previous patch is expected to be put into usb_kbd_testc(). But it went
into usb_kbd_getc() after applied.
This patch is to put change in correct place.Signed-off-by: Jim Lin
-
TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.Signed-off-by: Jim Lin
-
This flag is to make console aware that NET transfer is running or not.
Signed-off-by: Jim Lin
-
The 'enable' argument can be better expressed as boolean.
Signed-off-by: Fabio Estevam
Reviewed-by: Otavio Salvador -
Currently we have the following behavior in ehci_hcd_init()
- Read csmr1 register, clear bit 26 and then set bit 26.
However a little bit later we call set_usb_phy_clk() which clears bit 26, so
let's get rid of the unnecessary code.Signed-off-by: Fabio Estevam
-
The manufacturer and product IDs are dynamically assigned when gadget is
bind.
Now the IDs aren't assigned at struct g_dnl_string_defs definition.Signed-off-by: Lukasz Majewski
Cc: Marek Vasut
Cc: "Egli, Samuel" -
USB composite gadget (g_dnl) supports only one configuration. Due to that
the corresponding field - bConfigurationValue has been changed.Moreover more descriptive names were chosen for relevant fields.
Windows XP setup:
- Thesyscon USB Descriptor Dumper
- zadig_xp program for WinUSB installation (which is required by dfu-util)
- dfu-util for windows (version 0.6)
- TRATS target connected via USB hub to test Win XP machine.Tested at: Trats - Exynos4210
Signed-off-by: Lukasz Majewski
Cc: Marek Vasut
Cc: "Egli, Samuel" -
updating an ubi partition needs a completely erased mtd partition,
see:
http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.htmlSo, add partubi alt setting for the dfu_alt_info environment
variable to mark this partition as an ubi partition. In case we
update an ubi partition, we erase after flashing the image into the
partition, the remaining sektors.Signed-off-by: Heiko Schocher
Cc: Pantelis Antoniou
Cc: Tom Rini
Cc: Lukasz Majewski
Cc: Kyungmin Park
Cc: Marek Vasut
Cc: Wolfgang Denk
Cc: Scott Wood -
The existing USB configuration parsing code relies on the descriptors'
own length values when reading through the configuration blob. Since the
size of those descriptors is always well-defined, we should rather use
the known sizes instead of trusting device-provided values to be
correct. Also adds some safety to potential out-of-order descriptors.Change-Id: I16f69dfdd6793aa0fe930b5148d4521f3e5c3090
Signed-off-by: Julius Werner -
Add the call back to reset the LAN9730 after
the FEAT_POWER has been called.Signed-off-by: Dan Murphy
-
Add a __weak function that can be overridden to reset devices
attached to an ehci devices after the FEAT_POWER has been submittedSigned-off-by: Dan Murphy
-
Set the usbethaddr based on the OMAP DIE_ID registers
which should be unique for each processor.Then set this as the usb ethernet MAC address.
Signed-off-by: Dan Murphy
-
Add the USB ehci support for the OMAP5 uEVM.
Configure the uEVM mux data
Add the flags to build the appropriate modules
Add the usb call backs to initialize the EHCI controllerSigned-off-by: Dan Murphy
-
Fix the linker error for missing ulpi_reset when ulpi is not defined
in the board config.Signed-off-by: Dan Murphy
Acked-by: Marek Vasut -
* Enable the OMAP5 EHCI host clocks
* Add OMAP5 EHCI register definitions
* Add OMAP5 ES2 host revisionSigned-off-by: Dan Murphy
-
Change the board name for the sys info to
5432 uEVMSigned-off-by: Dan Murphy
Acked-by: Marek Vasut
23 Aug, 2013
5 commits
-
Without this patch, when the currently chosen environment to be written
has bad blocks, saveenv fails completely. Instead, when there is
redundant environment fall back to the other copy. Environment reading
needs no adjustment, as the fallback logic for incomplete writes applies
to this case as well.Signed-off-by: Phil Sutter
-
Signed-off-by: Masahiro Yamada
-
When executing nand scrub, the user gets the prompt:
Really scrub this NAND flash?
We do not want the annoying usage displayed when saying N here.
Signed-off-by: Masahiro Yamada
-
If a non-zero value is given to only_oob argument,
printing the main area is skipped.With a little modification, we can skip the whole
while loop.Signed-off-by: Masahiro Yamada
-
If datbuf = memalign(ARCH_DMA_MINALIGN, nand->writesize);
succeeds and
oobbuf = memalign(ARCH_DMA_MINALIGN, nand->oobsize);
fails, nand_dump function should free databuf.Signed-off-by: Masahiro Yamada
22 Aug, 2013
2 commits
-
Fix a bug introduced by commit 3aa29dee
TPL : introduce the TPL based on the SPLSigned-off-by: York Sun
21 Aug, 2013
15 commits
-
Signed-off-by: Николай Пузанов
Acked-by: York Sun -
Multiple read/write transactions initiated by security
engine may cause system to hang.
Workaround: set MCFGR[AXIPIPE] to 0 to avoid hang.Signed-off-by: Shengzhou Liu
Acked-by: York Sun -
There was a bug for calculating ddr_freq_mhz,
it should be divided by 1000000 rather than 0x1000000.Signed-off-by: Shengzhou Liu
Acked-by: York Sun -
Also some fix for QSGMII.
1. fix QSGMII configure of Serdes2.
2. fix PHY address of QSGMII MAC9 & MAC10 for each FMAN.
3. fix dtb for QSGMII interface.Signed-off-by: Shaohui Xie
Acked-by: York Sun -
When using QSGMII protocols, the first lane and third lane on each slot
need to be swapped.Signed-off-by: Shaohui Xie
Acked-by: York Sun -
Since the parameters need to be modified according to different Serdes
protocols at runtime, the const will block this. Also remove const from
arrays define used by vsc3316_config.Signed-off-by: Shaohui Xie
Acked-by: York Sun -
Makes the startup output more consistent
Signed-off-by: Shruti Kanetkar
Acked-by: Andy Fleming
Acked-by: Stefan Roese
Acked-by: York Sun -
Makes the startup output more consistent
Signed-off-by: Shruti Kanetkar
Acked-by: Andy Fleming
Acked-by: York Sun -
This patch cleans up license header in these files:
board/freescale/p1022ds/spl.c
drivers/mmc/fsl_esdhc_spl.c
drivers/mtd/spi/fsl_espi_spl.cSigned-off-by: York Sun
-
85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions.
because of this code checkpatch script generates "WARNING: Avoid CamelCase".Convert variables name to normal naming convention and modify board, driver
files with updated the new structure.Signed-off-by: Prabhakar Kushwaha
Acked-by: York Sun -
TPL is introduced in the patch "NAND: TPL : introduce the TPL
based on the SPL", here enable TPL for p1022ds nand boot.Signed-off-by: Ying Zhang
Acked-by: York Sun -
Due to the nand SPL on some board(e.g. P1022DS)has a size limit, it can
not be more than 4K. So, the SPL cannot initialize the DDR with the SPD
code. This patch introduces TPL to enable a loader stub that is loaded
by the code from the SPL. It initializes the DDR with the SPD or other
operations.The TPL's size is sizeable, the maximum size is decided by the memory's
size that TPL runs. It initializes the DDR through SPD code, and copys
final uboot image to DDR. So there are three stage uboot images:
* spl_boot, * tpl_boot, * final uboot imageSigned-off-by: Ying Zhang
Acked-by: York Sun -
Enable p1022ds to start from eSPI with SPL.
Signed-off-by: Ying Zhang
Acked-by: York Sun -
This patch introduces SPL to enable a loader stub that being loaded by
the code from the internal on-chip ROM. It loads the final uboot image
into DDR, then jump to it to begin execution.The SPL's size is sizeable, the maximum size must not exceed the size of L2
SRAM. It initializes the DDR through SPD code, and copys final uboot image
to DDR. So there are two stage uboot images:
* spl_boot, 96KB size. The env variables are copied to L2 SRAM, so that
ddr spd code can get the interleaving mode setting in env. It loads
final uboot image from offset 96KB.
* final uboot image, size is variable depends on the functions enabled.Signed-off-by: Ying Zhang
Acked-by: York Sun -
Enable p1022ds to start from eSDHC with SPL.
Signed-off-by: Ying Zhang
Acked-by: York Sun
