29 Apr, 2011
1 commit
-
The tsec driver was defining the default MDIO address as
the TSEC_BASE + 0x520, but on eTSEC2 controllers, the first
TSEC's registers are separated from the MDIO registers. Use
the existing MDIO_BASE_ADDR, instead.Signed-off-by: Andy Fleming
Signed-off-by: Kumar Gala
21 Apr, 2011
2 commits
-
This converts tsec to use the new PHY Lib. All of the old PHY support
is ripped out. The old MDIO driver is split off, and placed in
fsl_mdio.c. The initialization is modified to initialize the MDIO
driver as well. The powerpc config file is modified to configure PHYLIB
if TSEC_ENET is configured.Signed-off-by: Mingkai Hu
Signed-off-by: Andy Fleming
Signed-off-by: Kumar Gala
Acked-by: Detlev Zundel -
Signed-off-by: Mingkai Hu
Acked-by: Andy Fleming
Signed-off-by: Kumar Gala
Acked-by: Detlev Zundel
10 Jan, 2011
1 commit
-
The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.Signed-off-by: Mike Frysinger
01 Feb, 2010
3 commits
-
The TSEC_FIBER flag should be set when a PHY is operating with an
external fiber interface. Currently it is only used to notify a user
that the PHY is operating in fiber mode.A short description was also added to the other TSEC flag defines so
that it is clear how they differ from one another.Signed-off-by: Peter Tyser
Signed-off-by: Ben Warren -
The BCM5482 PHY supports both copper and fiber as an ethernet medium.
By enabling its copper/fiber mode auto-detection feature it can
dynamically determine if it should be configured for copper or fiber.Signed-off-by: Peter Tyser
Signed-off-by: Ben Warren -
This is generally good practice and saves ~150 bytes.
Signed-off-by: Peter Tyser
Signed-off-by: Ben Warren
06 Jan, 2010
2 commits
-
1. Modified the tsec_mdio structure to include the new regs
2. Modified the MDIO_BASE_ADDR so that it will handle both
older version and new version of etsec.Signed-off-by: Sandeep Gopalpet
Acked-by: Kim Phillips
Signed-off-by: Kumar Gala -
Moved the mdio regs out of the tsec structure,and
provided different offsets for tsec base and mdio
base so that provision for etsec2.0 can be provided.This patch helps in providing the support for etsec2.0
In etsec2.0, the MDIO register space and the etsec reg
space are different.Also, moved the TSEC_BASE_ADDR and MDIO_BASE_ADDR definitons into
platform specific files.Signed-off-by: Sandeep Gopalpet
Acked-by: Kim Phillips
Signed-off-by: Kumar Gala
15 Jun, 2009
1 commit
-
Signed-off-by: Zach LeRoy
Acked-by: Kumar Gala
Signed-off-by: Ben Warren
13 Jun, 2009
1 commit
-
Use the standard lowercase "xx" capitalization that other Freescale
architectures use for CPU defines to prevent confusion and errorsSigned-off-by: Peter Tyser
Signed-off-by: Kim Phillips
05 Dec, 2008
1 commit
-
This patch tries to ensure that phy interrupt pin
won't be asserted after booting. We experienced
following issues with current 88E1121R phy init:Marvell 88E1121R phy can be hardware-configured
to share MDC/MDIO and interrupt pins for both ports
P0 and P1 (e.g. as configured on socrates board).
Port 0 interrupt pin will be shared by both ports
in such configuration. After booting Linux and
configuring eth0 interface, port 0 phy interrupts
are enabled. After rebooting without proper eth0
interface shutdown port 0 phy interrupts remain
enabled so any change on port 0 (link status, etc.)
cause assertion of the interrupt. Now booting Linux
and configuring eth1 interface will cause permanent
phy interrupt storm as the registered phy 1 interrupt
handler doesn't acknowledge phy 0 interrupts. This
of course should be fixed in Linux driver too.Signed-off-by: Anatolij Gustschin
Acked-by: Andy Fleming
Signed-off-by: Ben Warren
19 Oct, 2008
1 commit
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
13 Sep, 2008
1 commit
-
Signed-off-by: Wolfgang Denk
03 Sep, 2008
3 commits
-
Adds support for configuring the TBI to talk properly with the SerDes.
Signed-off-by: Andy Fleming
Signed-off-by: Ben Warren -
The tsec driver contains a hard-coded array of configuration information
for the tsec ethernet controllers. We create a default function that works
for most tsecs, and allow that to be overridden by board code. It creates
an array of tsec_info structures, which are then parsed by the corresponding
driver instance to determine configuration. Also, add regs, miiregs, and
devname fields to the tsec_info structure, so that we don't need the kludgy
"index" parameter.Signed-off-by: Andy Fleming
Signed-off-by: Ben Warren -
This is to prepare the way for board code passing in the tsec_info structure
Signed-off-by: Andy Fleming
Signed-off-by: Ben Warren