09 Dec, 2013
1 commit
-
Add support for USB-A9263 board manufactured by Calao Systems
(http://www.calao-systems.com/).
Code is based on old U-Boot sources (2010.09) released by Calao.Signed-off-by: Mateusz Kulikowski
Signed-off-by: Andreas Bießmann
02 Dec, 2013
1 commit
-
add common phy reset code into a common function.
Signed-off-by: Heiko Schocher
Cc: Andreas Bießmann
Cc: Bo Shen
Cc: Jens Scharsig
Cc: Sergey Lapin
Cc: Stelian Pop
Cc: Albin Tonnerre
Cc: Eric Benard
Cc: Markus Hubig
Acked-by: Jens Scharsig (BuS Elektronik)
Tested-by: Jens Scharsig (BuS Elektronik)
Tested-by: Bo Shen
Acked-by: Bo Shen
Signed-off-by: Andreas Bießmann
01 Nov, 2013
1 commit
-
Signed-off-by: Masahiro Yamada
Cc: Albert ARIBAUD
Cc: Andreas Bießmann
Cc: Stefano Babic
Cc: Prafulla Wadaskar
Cc: Minkyu Kang
Cc: Vipin Kumar
Cc: Tom Warren
Cc: Tom Rini
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
01 Sep, 2012
1 commit
-
A lot of at91 boards have the console_init_f in board_init. This is useless
cause it was called before by generic code in lib/board.c.Signed-off-by: Andreas Bießmann
cc: Jens Scharsig
cc: Stelian Pop
cc: Sedji Gaouaou
cc: Albin Tonnerre
cc: Eric Benard
Tested-by: voice.shen@atmel.com
Tested-by: voice.shen@atmel.com
Acked-by: Jens Scharsig (BuS Elektronik)
Tested-by: Jens Scharsig (BuS Elektronik)
20 Dec, 2011
2 commits
-
MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 were removed
from mach-types.h. Add them to the board config file.Signed-off-by: Anatolij Gustschin
Acked-by: Simon Glass -
MACH_TYPE_SBC35_A9G20 was removed from mach-types.h.
Add it to the board config file.Signed-off-by: Anatolij Gustschin
Acked-by: Simon Glass
29 Nov, 2011
1 commit
-
Change my old email address which is no longer valid.
Signed-off-by: Stelian Pop
Signed-off-by: Anatolij Gustschin
16 Oct, 2011
1 commit
-
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used. Punt them all.MAKEALL didn't report any errors related to this that I could see.
Signed-off-by: Mike Frysinger
04 Sep, 2011
2 commits
-
Cc: Albin Tonnerre
CC: Gregory Hermant
Signed-off-by: Thomas Petazzoni -
Cc: Albin Tonnerre
Cc: Gregory Hermant
Signed-off-by: Thomas Petazzoni
Signed-off-by: Reinhard MeyerRemoved SBC35 from MAKEALL
18 Nov, 2010
1 commit
-
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils. As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.The name of each former library archive is preserved except for
extensions which change from ".a" to ".o". This commit updates
references accordingly where needed, in particular in some linker
scripts.This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols. Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.Signed-off-by: Sebastien Carlier
19 Oct, 2010
1 commit
-
The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.Signed-off-by: Wolfgang Denk
12 Jul, 2010
1 commit
-
Also, remove all calls to eth_init() in boards that use MACB
Signed-off-by: Ben Warren
02 Sep, 2009
2 commits
-
The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by
Calao Systems . Their components are very
similar to the AT91SAM9260EK board, so their configuration is based on
the configuration of this board. There are however some differences:
different clocks, no LCD, no ethernet. They also can use SPI EEPROM to
store the environment.Signed-off-by: Albin Tonnerre
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD -
The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
. It is built around an AT91SAM9G20 ARM SoC
running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard
battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND
flash, two USB host ports, and an USB device port. More informations can be
found atSigned-off-by: Albin Tonnerre