05 Apr, 2017
9 commits
-
Add board_late_mmc_env_init to support MMC device detection for environment
variables.Signed-off-by: Ye Li
-
Since we can use USB ethernet instead of local ethernet, add ethernet support
for it. To use USB ethernet function at u-boot, just plug in Micro-AB cable
at USBOTG1 port with USB2Ethernet adapter connected.Signed-off-by: Peter Chen
(cherry picked from commit 60ffddf87cf6b8502c5d5fc6540364adfd66ebb3)
Signed-off-by: Ye Li -
Enable and setup board level codes for MIPI DSI splashscreen on EVK board.
User needs set env variable"panel=HX8363_WVGA" for displaying.Signed-off-by: Ye Li
(cherry picked from commit 49cb68f5c17e42f9290336e1252ace6ac7d0b5ce) -
Porting codes to support USB OTG0 on the EVK board. Convert
to use DM USB driver.Signed-off-by: Ye Li
-
Wrong I2c driver configuration name is used in codes, so I2c driver is
not built. Correct it.Signed-off-by: Ye Li
-
Enable the CONFIG_ULP_WATCHDOG in defconfig, so that reset command
can work.Signed-off-by: Ye Li
-
Porting the QSPI flash board support from v2016.03, and convert to use
DM QSPI driver.
Since we need to support QSPI at default in u-boot, change the default
DTS file to qspi enabled DTS.Signed-off-by: Ye Li
-
Enable MMC support.
The fsl sdhc driver needs regulator to enable power, so enable
regulator support.And bootcmd and more env.
Signed-off-by: Peng Fan
Cc: Stefano Babic -
Add EVK board support.
Add the evk dts file.LOG:
U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800)CPU: Freescale i.MX7ULP rev1.0 at 500 MHz
Reset cause: POR
Boot mode: Dual boot
Model: NXP i.MX7ULP EVK
DRAM: 1 GiB
MMC: FSL_SDHC: 0
In: serial@402D0000
Out: serial@402D0000
Err: serial@402D0000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0Signed-off-by: Peng Fan
Cc: Stefano Babic
