15 Apr, 2017
3 commits
-
Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.Signed-off-by: Wenyou Yang
-
Due to the introduction of the pinctrl and clk driver, and using
device tree files, remove the unneeded hardcoded pin configuration
and clock enabling code from the board file.Signed-off-by: Wenyou Yang
Remove CONFIG_PHY_MICREL as per previous patch:
Signed-off-by: Simon Glass -
Update the configuration files to support the device tree and
driver model, so do SPL. The device clock and pins configuration
are handled by the clock and the pinctrl drivers respectively.Signed-off-by: Wenyou Yang
Add back CONFIG_PHY_MICREL to prevent a build error:
Signed-off-by: Simon Glass
14 Apr, 2017
1 commit
-
The intention of the removal is the preparation to introduce the
new AT91 PIO pinctrl driver.Use the union to make the PIO3 and PIO2's registers be together
and make their offset aligned.Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
13 Feb, 2017
1 commit
-
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
make the code more readable. Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.This commit was created as follows:
[1] Edit "default n" to "default y" in the config entry in
common/Kconfig.[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"
[3] Rename the instances in defconfigs by the following:
find . -path './configs/*_defconfig' | xargs sed -i \
-e '/CONFIG_SYS_NO_FLASH=y/d' \
-e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'[4] Change the conditionals by the following:
find . -name '*.[ch]' | xargs sed -i \
-e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
-e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
-e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
-e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'[5] Modify the following manually
- Rename the rest of instances
- Remove the description from README
- Create the new Kconfig entry in drivers/mtd/Kconfig
- Remove the old Kconfig entry from common/Kconfig
- Remove the garbage comments from include/configs/*.hSigned-off-by: Masahiro Yamada
04 Jun, 2016
1 commit
-
nand_info[] is now an array of pointers, with the actual mtd_info
instance embedded in struct nand_chip.This is in preparation for syncing the NAND code with Linux 4.6,
which makes the same change to struct nand_chip. It's in a separate
commit due to the large amount of changes required to accommodate the
change to nand_info[].Signed-off-by: Scott Wood
19 Feb, 2016
2 commits
-
Due to introducing the PMC_PLLICPR init function, use this
function to clean up the code.Signed-off-by: Wenyou Yang
Tested-by: Heiko Schocher
Reviewed-by: Andreas Bießmann -
Due to introducing the new peripheral clock handle functions,
use these functions to reduce duplicated code.Signed-off-by: Wenyou Yang
Tested-by: Heiko Schocher
[Rebased on current master, fixup for at91rm9200ek]
Signed-off-by: Andreas Bießmann
02 Feb, 2016
1 commit
-
Add struct atmel_mpddrc_config to accommodate the mpddrc register
configurations, not using the mpddrc register map structure,
struct atmel_mpddrc, in order to increase readability and reduce
run-time memory use.Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
21 Aug, 2015
3 commits
-
Since sama5d3xek boards has different type of dtb blobs, so we need to detect
the cpu type in runtime.So we add a new variable $dtb_name. if $dtb_name is not defined, we just use
at91-${board_name}.dtbas the $dtb_name. Otherwise, we will just load the dtb with
$dtb_name.For sama5d3xek, we will detect cpu type and make up $dtb_name in
runtime.Signed-off-by: Josh Wu
-
To enable the clocks on the at91 boards a constant (0x4) is used.
This is replaced with a define in at91_pmc.h (1 << 2).Signed-off-by: Erik van Luijk
Reviewed-by: Andreas Bießmann -
The mpddr.c depends on ATMEL_BASE_MPDDRC for the base address to configure the controller.
This cannot be used when there is more than one controller (i.e. AT91SAM9G45, AT91SAM9M10).Signed-off-by: Erik van Luijk
[remove 'new blank line at EOF']
Signed-off-by: Andreas Bießmann
11 Jan, 2015
1 commit
-
Remove unused vsync parameter, and correct the include file.
Signed-off-by: Bo Shen
11 Oct, 2014
1 commit
-
Signed-off-by: Andreas Bießmann
Cc: Bo Shen
19 Sep, 2014
1 commit
-
Add NOR flash hardware init function, including SMC and PIO
configuration.Signed-off-by: Bo Shen
Reviewed-by: Andreas Bießmann
Signed-off-by: Andreas Bießmann
10 Mar, 2014
2 commits
-
Add NAND SPL boot support with hardware PMECC.
Signed-off-by: Bo Shen
Signed-off-by: Andreas Bießmann -
Add SPI SPL boot support for sama5d3xek board.
Signed-off-by: Bo Shen
Signed-off-by: Andreas Bießmann
11 Dec, 2013
1 commit
-
Conflicts:
arch/arm/cpu/armv7/rmobile/Makefile
doc/README.scrapyardNeeded manual fix:
arch/arm/cpu/armv7/omap-common/Makefile
board/compulab/cm_t335/u-boot.lds
02 Dec, 2013
2 commits
-
Enable Atmel sama5d3xek boart spl boot support, which can load u-boot
from SD card with FAT file system.Signed-off-by: Bo Shen
Signed-off-by: Andreas Bießmann -
Enable the PIO peripherals early than other peripherals.
Signed-off-by: Bo Shen
Signed-off-by: Andreas Bießmann
22 Nov, 2013
1 commit
-
Signed-off-by: Josh Wu
24 Sep, 2013
1 commit
-
Add RNDIS gadget support to test atmel usba udc driver
Signed-off-by: Bo Shen
22 Aug, 2013
1 commit
-
add gmac support for sama5d3xek board, the gmac embedded in:
- sama5d33, sama5d34, sama5d35Signed-off-by: Bo Shen
Signed-off-by: Andreas Bießmann
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
21 May, 2013
1 commit
-
Add sama5d3xek support with following feature
- boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector
- boot from SPI flash support
- boot from SD card support
- LCD support
- EMAC support
- USB OHCI supportSigned-off-by: Bo Shen
Signed-off-by: Andreas Bießmann