26 Mar, 2019
1 commit
-
This converts the following to Kconfig:
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_MODE
CONFIG_SF_DEFAULT_SPEEDI use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.Signed-off-by: Patrick Delaunay
14 Feb, 2019
1 commit
-
This patch is doing two things.
1. Exchanging order of boot commands. distro_bootcmd is run first
followed by Xilinx boot command.
2. Remove CONFIG_BOOTCOMMAND from configs (and follow mainline) by
creating Xilinx distribution bootcommand and wiring it as the last
bootcommand.QSPI, NAND distribution boot command will be added later.
Signed-off-by: Michal Simek
07 Feb, 2019
2 commits
-
Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
not break functionality.Signed-off-by: Vignesh R
Tested-by: Simon Goldschmidt
Tested-by: Stefan Roese
Tested-by: Horatiu Vultur
Reviewed-by: Jagan Teki
Tested-by: Jagan Teki #zynq-microzed -
SF_DUAL_FLASH claims to enable support for SF_DUAL_STACKED_FLASH and
SF_DUAL_PARALLEL_FLASH. But, in current U-Boot code, grepping for above
enums yield no user and therefore support seems to be incomplete. Remove
these configs so as to avoid confusion.Signed-off-by: Vignesh R
Reviewed-by: Jagan Teki
Tested-by: Jagan Teki #zynq-microzed
24 Jan, 2019
1 commit
-
Both boards have only controllers enabled that's why move to DM_I2C is
easy.Signed-off-by: Michal Simek
08 Jan, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
04 Sep, 2018
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
04 Jun, 2018
1 commit
-
CONFIG_DEBUG_UART_BASE and CONFIG_DEBUG_UART_CLOCK have changed that's
why this sync.Signed-off-by: Michal Simek
11 May, 2018
1 commit
-
Now that showing silicon version is part of the CPU
info display, let's remove checkboard().Note that the generic show_board_info() will still
show the DT 'model' property. For instance:U-Boot 2018.05-rc2-00025-g611b3ee0159b (Apr 19 2018 - 11:23:12 +0200)
CPU: Zynq 7z045
Silicon: v1.0
Model: Zynq ZC706 Development Board
I2C: readyBased on patches from Ariel D'Alessandro ,
and Ezequiel Garciamini configuration doesn't need to show this information.
Signed-off-by: Michal Simek
12 Apr, 2018
1 commit
-
Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all
configurations using it to Kconfig.Signed-off-by: Marek Vasut
Cc: Tom Rini
09 Apr, 2018
1 commit
-
Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig.
Signed-off-by: Mario Six
[trini: Re-run migration after also including CMD_MEMTEST]
Signed-off-by: Tom Rini
23 Mar, 2018
1 commit
-
Make defconfigs up2date with current location.
Signed-off-by: Michal Simek
01 Mar, 2018
3 commits
-
This patch added Kconfig support for CONFIG_ZYNQ_I2C0 and
CONFIG_ZYNQ_I2C1 and enabled it in respective defconfig.Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek -
This patch enabled CONFIG_SYS_I2C_ZYNQ in the respective
defconfig.Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek -
This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the
values over to the defconfigs.Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
02 Feb, 2018
1 commit
-
This commit moves USB_FUNCTION_THOR config to Kconfig.
Signed-off-by: Lukasz Majewski
Acked-by: Michal Simek
Reviewed-by: Jaehoon Chung
30 Jan, 2018
3 commits
-
BOOTCOMMAND is composed with distro_bootcmd but this variable is not
present. Enabling distro defaults setting is fixing it.Signed-off-by: Michal Simek
-
It will cleanup generic config and enable option to change it for every
board.Signed-off-by: Michal Simek
-
There are two reasons for doing this change.
There is still !DM driver for xilinx soft gpio IP and especially it is
saving some space for memory constrained boards like cse (almost ~400B).Signed-off-by: Michal Simek
15 Dec, 2017
1 commit
-
This patch is fixing two issues:
1. Insufficient stack size for fat fs buffers
2. Insufficient space in malloc areaTested on zc702 and zc706.
Signed-off-by: Michal Simek
28 Nov, 2017
2 commits
-
Move cadence/zynq serial driver via Kconfig
Signed-off-by: Michal Simek
Reviewed-by: Simon Glass -
Enabling fpga via Kconfig.
Signed-off-by: Michal Simek
11 Oct, 2017
1 commit
-
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.Signed-off-by: Tuomas Tynkkynen
04 Oct, 2017
1 commit
-
The g_dnl USB settings for the vendor ID, product ID and manufacturer are
actually common settings that can and should be shared by all the gadgets.Make them common by renaming them, and convert all the users.
Reviewed-by: Simon Glass
Reviewed-by: Lukasz Majewski
Signed-off-by: Maxime Ripard
28 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
15 Aug, 2017
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
12 Aug, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_CMD_THOR_DOWNLOADSigned-off-by: Simon Glass
Reviewed-by: Bin Meng
Reviewed-by: Philipp Tomsich
26 Jul, 2017
1 commit
-
This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.Signed-off-by: Simon Glass
Signed-off-by: Tom Rini
10 Jul, 2017
1 commit
-
Signed-off-by: Tom Rini
21 Jun, 2017
1 commit
-
Xilinx changes for v2017.07
ZynqMP:
- config cleanup
- SD LS mode support
- psu_init* cleanup
- unmap OCM
- Support for SMCZynq:
- add ddrc to Kconfig
- add topic-miamilite board support
20 Jun, 2017
1 commit
-
Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the
associated topic_miamiplus.h header obsolete, so remove that as well.Signed-off-by: Mike Looijmans
Signed-off-by: Michal Simek
19 Jun, 2017
1 commit
-
Signed-off-by: Tom Rini
13 Feb, 2017
2 commits
-
Xilinx fixes for v2017.03
- defconfig alignment
- Topic.nl board updates
- Minor microblaze comment fix -
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
make the code more readable. Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.This commit was created as follows:
[1] Edit "default n" to "default y" in the config entry in
common/Kconfig.[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"
[3] Rename the instances in defconfigs by the following:
find . -path './configs/*_defconfig' | xargs sed -i \
-e '/CONFIG_SYS_NO_FLASH=y/d' \
-e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'[4] Change the conditionals by the following:
find . -name '*.[ch]' | xargs sed -i \
-e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
-e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
-e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
-e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'[5] Modify the following manually
- Rename the rest of instances
- Remove the description from README
- Create the new Kconfig entry in drivers/mtd/Kconfig
- Remove the old Kconfig entry from common/Kconfig
- Remove the garbage comments from include/configs/*.hSigned-off-by: Masahiro Yamada
10 Feb, 2017
2 commits
-
Allow sending firmware to RAM. Without this, the DFU support was not
of much use.Signed-off-by: Mike Looijmans
Signed-off-by: Michal Simek -
Keep all defconfig sorted to ensure the smallest diff.
Signed-off-by: Michal Simek
31 Jan, 2017
1 commit
-
Make the naming scheme consistent; all SDHCI-base drivers prefixed
with CONFIG_MMC_SDHCI_.While we are here, add "depends on ARCH_ZYNQ || ARCH_ZYNQMP".
Signed-off-by: Masahiro Yamada
24 Jan, 2017
1 commit
-
This option should not really be user selectable. Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.Signed-off-by: Tom Rini
Acked-by: Masahiro Yamada (for UniPhier)
22 Jan, 2017
1 commit
-
Cc: Tom Rini
Signed-off-by: Jagan Teki
10 Jan, 2017
1 commit
-
Enable CONFIG_SYS_TEXT_BASE via Kconfig.
Signed-off-by: Michal Simek