14 Dec, 2017
1 commit
-
Include common config_distro_defaults.h and config_distro_bootcmd.h
for u-boot enviroments to support automatical distro boot which
scan boot.scr from external storage devices(e.g. SD and USB)
and execute autoboot script.Signed-off-by: Bhaskar Upadhaya
Signed-off-by: Rajesh Bhagat
Reviewed-by: York Sun
07 Dec, 2017
1 commit
-
Kernel is now located at 0x1000000 instead of 0xa00000
and envirorment variables are located at 3MB offset instead of
2MB in Flash.Signed-off-by: Bhaskar Upadhaya
Reviewed-by: York Sun
27 Oct, 2017
3 commits
-
Because COMFIG_DM_USB has been enabled and will not use it anymore.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
Reviewed-by: York Sun -
use Kconfig to select xhci accordingly.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
Reviewed-by: York Sun -
Use Kconfig to select QE-HDLC and USB pin-mux.
Signed-off-by: Ran Wang
Reviewed-by: Bin Meng
Reviewed-by: York Sun
29 Jul, 2017
1 commit
-
Now that xHCD does not use CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS,
remove it in all boards' config files.Signed-off-by: Bin Meng
Reviewed-by: Simon Glass
Reviewed-by: Stefan Roese
Tested-by: Stefan Roese
28 Jan, 2017
3 commits
-
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
Signed-off-by: Tom Rini -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay -
Signed-off-by: Patrick Delaunay
Signed-off-by: Patrick Delaunay
19 Jan, 2017
1 commit
-
Enable UUID and GPT partition support for NXP's ARM based SoCs
i.e. LS1012A, LS1021A, LS1043A, LS1046A and LS2080A.Also enable DOS partition for LS1012AFRDM boards.
Signed-off-by: Prabhakar Kushwaha
Reviewed-by: York Sun
08 Oct, 2016
1 commit
-
LS1012AFRDM has 512MB of DDR. So update kernel load address to
0x96000000.Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Pratiyush Mohan Srivastava
[York Sun: Reformatted commit message]
Reviewed-by: York Sun
26 Sep, 2016
1 commit
-
Instead of using multiple macros, a data structure is used to pass
board-specific parameters to MMDC DDR driver.Signed-off-by: York Sun
CC: Shengzhou Liu
Reviewed-by: Tom Rini
15 Sep, 2016
1 commit
-
This general MMDC driver adds basic support for Freescale MMDC
(Multi Mode DDR Controller). Currently MMDC is integrated on ARMv8
LS1012A SoC for DDR3L, there will be a update to this driver to
support more flexible configuration if new features (DDR4, multiple
controllers/chip selections, etc) are implimented in future.Meantime, reuse common MMDC driver for LS1012ARDB/LS1012AQDS/
LS1012AFRDM.Signed-off-by: Shengzhou Liu
Reviewed-by: York Sun
10 Sep, 2016
1 commit
-
In some cases we were missing CONFIG_USB=y so enable that when needed.
Reviewed-by: Masahiro Yamada
Signed-off-by: Tom Rini
07 Jun, 2016
1 commit
-
Modified:
configs/ls1012afrdm_qspi_defconfig
configs/ls1012aqds_qspi_defconfig
configs/ls1012ardb_qspi_defconfig
include/configs/ls1012afrdm.h
include/configs/ls1012aqds.h
include/configs/ls1012ardb.hSigned-off-by: Tom Rini
04 Jun, 2016
1 commit
-
QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance
development platform, with a complete debugging environment.
The LS1012AFRDM board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.Signed-off-by: Shengzhou Liu
Signed-off-by: Calvin Johnson
Signed-off-by: Pratiyush Mohan Srivastava
Signed-off-by: Prabhakar Kushwaha
Reviewed-by: York Sun