04 Feb, 2020
1 commit
-
Enable FSPI controller support. So, flash environment can now be used
Signed-off-by: Kuldeep Singh
Reviewed-by: Priyanka Jain
24 Jan, 2020
2 commits
-
LS1028A QDS boards have a MDIO MUX and they require the driver for it for
PHYs to work.Signed-off-by: Alex Marginean
Signed-off-by: Priyanka Jain -
Currently LS1028A board code uses arch_misc_init to set up the board mux
on QDS. Move this code to misc_init_r. This is consistent with LS gen 2
and T series SoCs/boards.Signed-off-by: Alex Marginean
Reviewed-by: Priyanka Jain
23 Jan, 2020
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
16 Jan, 2020
1 commit
-
The SDHC clock divider value for LS1028A should be default 2,
not 1.Signed-off-by: Yangbo Lu
26 Dec, 2019
1 commit
-
Enable 4-byte Fast Read command for Flexspi AHB mode
Signed-off-by: Kuldeep Singh
Signed-off-by: Priyanka Jain
05 Dec, 2019
2 commits
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
-
MTD must be enabled when there is a SPI NOR flash using the
SPI_FLASH_MTD config entry.Signed-off-by: Miquel Raynal
Reviewed-by: Boris Brezillon
29 Nov, 2019
1 commit
-
Since at least some of the drivers relevant to LS1028A are now following
DM, it's useful to have dm command enabled by default.Signed-off-by: Alex Marginean
Reviewed-by: Priyanka Jain
27 Nov, 2019
1 commit
-
LS1028A QDS board supports multiple combinations of SerDes protocols and
multiple add-on cards with Ethernet PHYs. Some of them require specific
configuration in Linux DT, and the plan is to use DT overlays for them.Signed-off-by: Alex Marginean
Reviewed-by: Priyanka Jain
21 Nov, 2019
1 commit
-
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.Cc: Wolfgang Denk
Cc: Joe Hershberger
Cc: Patrick Delaunay
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini
Acked-by: Joe Hershberger
Reviewed-by: Simon Goldschmidt
08 Nov, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
22 Aug, 2019
1 commit
-
Enable related configs on all ls1028aqds boards to support pcf2127
rtc DM function.Signed-off-by: Chuanhua Han
Reviewed-by: Alex Marginean
Tested-by: Alex Marginean
Reviewed-by: Prabhakar Kushwaha
14 Aug, 2019
1 commit
-
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini
26 Jul, 2019
1 commit
-
Enables ethernet, MDIO, PHY drivers for LS1028A RDB and QDS.
Signed-off-by: Alex Marginean
Reviewed-by: Bin Meng
Acked-by: Joe Hershberger
23 Jun, 2019
1 commit
-
Moved CONFIG_FSL_ESDHC from header files to defconfig files.
Signed-off-by: Yangbo Lu
Tested-by: Steffen Dirkwinkel
Reviewed-by: Peng Fan
Reviewed-by: Lukasz Majewski
Reviewed-by: Martyn Welch
Acked-by: Jason Liu
19 Jun, 2019
1 commit
-
LS1028A includes an integrated PCI bus with 11 PCI functions residing on
bus 0. ECAM plus the device register space takes up 256MB of address
space.Signed-off-by: Alex Marginean
Reviewed-by: Bin Meng
Reviewed-by: Prabhakar Kushwaha
22 May, 2019
2 commits
-
Signed-off-by: Zhao Qiang
Reviewed-by: Prabhakar Kushwaha -
LS1028AQDS Development System is a high-performance
computing, evaluation, and development platform that supports
LS1028A QorIQ Architecture processor.Signed-off-by: Sudhanshu Gupta
Signed-off-by: Rai Harninder
Signed-off-by: Rajesh Bhagat
Signed-off-by: Bhaskar Upadhaya
Signed-off-by: Tang yuantian
Signed-off-by: Prabhakar Kushwaha