24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
07 Dec, 2011
2 commits
-
This reverts commit 5c45a22b9203351a32aec4600514341b91175542.
It causes a lot of "incompatible pointer type" warnings for a large
number of Ethernet drivers, which are not really worth fixing
especially as this patch was only supposed to help the old,
deprecated miiphy API. Instead of adding more efforts to a lost case
we rather revert it.Signed-off-by: Wolfgang Denk
-
This patch is added for PHY whose register offset value exceeds 0xFF and
cannot be used with "unsigned char" datatype in miiphy_read, miiphy_write
and miiphy_register functions. Datatype of register offset is changed to
unsigned short instead of unsigned char so that offset value greater then
0xFF can be used.Signed-off-by: Chandan Nath
Acked-by: Mike Frysinger
06 Dec, 2011
1 commit
-
We want to move everything to phylib, and we definitely don't want
new drivers using the miiphy infrastructure.Signed-off-by: Andy Fleming
26 Jul, 2011
1 commit
-
In miiphy_register() the new device's name was initialised by passing a
string parameter as the format string to sprintf(). As this would cause
problems if it ever contained a '%' symbol, switch to using strncpy()
instead.Signed-off-by: Laurence Withers
Cc: Andy Fleming
01 May, 2011
1 commit
-
Fix warning introduced while recent PHY Lib changes:
miiphyutil.c: In function 'miiphy_read':
miiphyutil.c:304: warning: comparison is always false due to limited range of data typeSigned-off-by: Anatolij Gustschin
Cc: Andy Fleming
21 Apr, 2011
2 commits
-
Extends the mii_dev structure to participate in a full-blown MDIO and
PHY driver scheme. The mii_dev structure and miiphy calls are modified
in such a way to allow the original mii command and miiphy
infrastructure to work as before, but also to support a new set of APIs
which allow (among other things) sharing of PHY driver code and 10G supportThe mii command will continue to support normal PHY management functions
(Clause 22 of 802.3), but will not be changed to support 10G
(Clause 45).The basic design is similar to PHY Lib from Linux, but simplified for
U-Boot's network and driver infrastructure.We now have MDIO drivers and PHY drivers
An MDIO driver provides:
read
write
resetA PHY driver provides:
(optionally): probe
config - initial setup, starting of auto-negotiation
startup - waiting for AN, and reading link state
shutdown - any cleanup neededThe ethernet drivers interact with the PHY Lib using these functions:
phy_connect()
phy_config()
phy_startup()
phy_shutdown()Each PHY driver can be configured separately, or all at once using
config_phylib_all_drivers.h (added in the patch which adds the drivers)We also provide generic drivers for Clause 22 (10/100/1000), and
Clause 45 (10G) PHYs.We also implement phy_reset(), and call it in phy_connect(). Because
phy_reset() is essentially the same as miiphy_reset, but:
a) must support 10G PHYs, and
b) should use the phylib primitives,we implement miiphy_reset, using phy_reset(), but only when
CONFIG_PHYLIB is set. Otherwise, we just use the old version. In this
way, we save on compile size, even if we don't manage to save code size.Pulled ethtool.h and mdio.h from:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
782d640afd15af7a1faf01cfe566ca4ac511319d
With many, many deletions so as to enable compilation under u-bootSigned-off-by: Andy Fleming
Signed-off-by: Kumar Gala
Acked-by: Detlev Zundel -
Mostly putting a space between function name and "(", and
doing return (foo)Signed-off-by: Andy Fleming
Acked-by: Detlev Zundel
10 Jan, 2011
1 commit
-
The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.Signed-off-by: Mike Frysinger
10 Aug, 2010
3 commits
-
For code that uses miiphy_{read,write}, every call invokes a full look up
of the mii list. There is already a "current_mii" cache that is used by
some code, but have the miiphy_{read,write} function use it as well. This
does increase the code size slightly, but I think it's worth it.Signed-off-by: Mike Frysinger
Signed-off-by: Ben Warren -
Rather than have every func re-implement the list walking code, do it one
local function. This shrinks the resulting object code a little while
making the source much more manageable.Signed-off-by: Mike Frysinger
Signed-off-by: Ben Warren -
The driver name does not need to be writable, so constify it.
Signed-off-by: Mike Frysinger
Signed-off-by: Ben Warren
12 Mar, 2010
1 commit
-
Signed-off-by: Michael Zaidman
07 Feb, 2010
1 commit
-
This patch fixes a problem I've notived on a buggy PPC4xx system. This
system has problems with the PHY MDIO communication and seemed to be
stuck/crashed in miiphy_reset(). But degugging revealed, that the CPU
didn't crash, but "only" hung in this counting loop for about 2 minutes.This patch now uses a real timeout of 0.5 seconds (as mentioned in the
comment in miiphy_reset).Signed-off-by: Stefan Roese
Signed-off-by: Ben Warren
19 Oct, 2009
1 commit
-
Signed-off-by: Niklaus Giger
19 Oct, 2008
1 commit
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
30 Aug, 2008
1 commit
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
15 Feb, 2008
1 commit
-
Current MII_DEBUG is confusing in two ways. One is useless define-then-
undef at the top of the file. The other is there is only one debug() in
this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
While there are many useful printf()/puts() debug codes, but they are for
DEBUG, not for MII_DEBUG.This patch tries to put them all together into MII_DEBUG and debug().
Signed-off-by: Shinya Kuribayashi
06 Nov, 2007
2 commits
-
This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
"miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
returns non-zero iff the PHY registers are configured for 1000BASE-X. The
"mii info" command is modified to distinguish between 1000BASE-T and -X.Signed-off-by: Larry Johnson
Signed-off-by: Ben Warren -
Signed-off-by: Larry Johnson
Signed-off-by: Ben Warren
09 Jul, 2007
1 commit
-
Signed-off-by: Jon Loeliger
04 Jul, 2007
1 commit
-
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)Signed-off-by: Jon Loeliger
01 Dec, 2005
1 commit
-
ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().Based on initial patch for 4xx platform by Matthias Fuchs.
29 Oct, 2005
1 commit
13 Aug, 2005
1 commit
-
Patch by Carl Riechers, 24 Jun 2005
07 Jun, 2004
1 commit
-
Add support for OMAP730 Perseus2 Development board
* Patch by Alan J. Luse, 29 Apr 2004:
Fix flash chip-select (OR0) option register setting on FADS boards.* Patch by Alan J. Luse, 29 Apr 2004:
Report MII network speed and duplex setting properly when
auto-negotiate is not enabled.* Patch by Jarrett Redd, 29 Apr 2004:
Fix hang on reset on Ocotea board due to flash in wrong mode.
16 Apr, 2004
1 commit
-
add networking support for VLANs (802.1q), and CDP (Cisco Discovery Protocol)
24 Mar, 2004
2 commits
-
Increase speed of sector reads from SystemACE,
shorten poll timeout and remove a useless reset* Patch by Tolunay Orkun, 19 Mar 2004:
Make GigE PHY 1000Mbps Speed/Duplex detection conditional
(CONFIG_PHY_GIGE)* Patch by Brad Kemp, 18 Mar 2004:
prevent machine checks during a PCI scan* Patch by Pierre Aubert, 18 Mar 2004:
Fix string cleaning in IDE identification -
- show PCI clock frequency on MPC8260 systems
- add FCC_PSMR_RMII flag for HiP7 processors
- in do_jffs2_fsload(), take load address from load_addr if not set
explicit, update load_addr otherwise
- replaced printf by putc/puts when no formatting is needed
(smaller code size, faster execution)
15 Mar, 2004
1 commit
-
- Fix Gigabit Ethernet support for 440GX
- Add Gigabit Ethernet Support to MII PHY utilities* Patch by Brad Kemp, 12 Mar 2004:
Fixes for drivers/cfi_flash.c:
- Better support for x8/x16 implementations
- Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
- Added defines for AMD command and address constants* Patch by Leon Kukovec, 12 Mar 2004:
Fix get_dentfromdir() to correctly handle deleted dentries* Patch by George G. Davis, 11 Mar 2004:
Remove hard coded network settings in TI OMAP1610 H2
default board config* Patch by George G. Davis, 11 Mar 2004:
add support for ADS GraphicsClient+ board.
09 Feb, 2004
1 commit
-
Allow bzip2 compression for small memory footprint boards
* Patch by Brad Kemp, 21 Jan 2004:
Add support for CFI flash driver for both the Intel and the AMD
command sets.* Patch by Travis Sawyer, 20 Jan 2004:
Fix pci bridge auto enumeration of sibling p2p bridges.* Patch by Tolunay Orkun, 12 Jan 2004:
Add some delays as needed for Intel LXT971A PHY support* Patches by Stephan Linz, 09 Jan 2004:
- avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
- make DK1C20 board configuration related to ASMI conform to
documentation
07 Dec, 2003
1 commit
-
- more endianess fixes for LAN91C111 driver
- CFG_HZ configuration patch for NIOS Cyclone board* Patch by Stephan Linz, 28 Oct 2003:
fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c* Patch by Steven Scholz, 20 Oct 2003:
- make "mii info " show infor for PHY at "addr" only
- Endian fix for miiphy_info()
09 Oct, 2003
1 commit
-
fix pll_pci_to_mem_multiplier table for MPC8245
* Patch by Anders Larsen, 22 Sep 2003:
enable timed autoboot on PXA* Patch by David Müller, 22 Sep 2003:
- add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
returns correct libgcc file path
- "latency" reduction of busy-loop waiting to improve "U-Boot" boot
time on s3c24x0 systems* Patch by Jon Diekema, 19 Sep 2003:
- Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
link state to the fault LED.
- In NetLoop, make the Fault LED reflect the link status. The link
status gets updated on entry, and on timeouts.
03 Nov, 2002
1 commit