10 Dec, 2020
1 commit
-
drivers/usb/host/xhci-ring.c: In function 'xhci_bulk_tx':
drivers/usb/host/xhci-ring.c:726:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
726 | if ((void *)le64_to_cpu(event->trans_event.buffer) != last_transfer_trb_addr) {
| ^Signed-off-by: Ran Wang
19 Nov, 2020
2 commits
-
This reverts commit db5e48bab9ef90b05da8c4ad396a9a959506b2fe.
The changes needs rework to work on i.mx devices
LFU-40Signed-off-by: Priyanka Jain
-
This reverts commit ef959d695523c391a68093550a3bfb8714ab7ac9.
The changes needs rework to work on i.mx devices
LFU-40Signed-off-by: Priyanka Jain
09 Nov, 2020
6 commits
-
Add prarantheses to fix build warning as follows,
if (!strict_strtoul(argv[1], 10, &override))
^~
board/freescale/common/vid.c:976:3: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the if
if (ret < 0)Signed-off-by: Biwen Li
-
Read PFE ESBC header flash with spi_flash_read API
- logs as follows,
Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256
KiB, total 64 MiB
"Synchronous Abort" handler, esr 0x96000210
elr: 000000008206db44 lr : 0000000082004ea0 (reloc)
elr: 00000000b7ba6b44 lr : 00000000b7b3dea0
x0 : 00000000b79407e8 x1 : 0000000040640000
x2 : 0000000000000050 x3 : 0000000000000000
x4 : 000000000000000a x5 : 0000000000000050
x6 : 0000000000000366 x7 : 00000000b7942308
x8 : 00000000b76407c0 x9 : 0000000000000008
x10: 0000000000000044 x11: 00000000b7634d1c
x12: 000000000000004f x13: 0000000000000044
x14: 00000000b7634d98 x15: 00000000b76407c0
x16: 0000000000000000 x17: 0000000000000000
x18: 00000000b7636dd8 x19: 0000000000000000
x20: 00000000b79407d0 x21: 00000000b79407e8
x22: 0000000040640000 x23: 00000000b7634e58
x24: 0000000000000000 x25: 0000000003800000
x26: 00000000b7bdd000 x27: 0000000000000000
x28: 0000000000000000 x29: 00000000b7634d10Code: d2800003 eb03005f 54000101 d65f03c0 (f8636826)
Resetting CPU ...Signed-off-by: Biwen Li
-
Update kernel_size_sd variable with correct value for lx2160a.
Signed-off-by: Manish Tomar
-
Update kernelheader_addr and kernelheader_addr variables with correct values
for ls1043a.Signed-off-by: Manish Tomar
-
Make sure are RGMII internal delay modes are covered.
Signed-off-by: Madalin Bucur
-
Signed-off-by: Madalin Bucur
05 Nov, 2020
3 commits
-
Update address length argument
Signed-off-by: Biwen Li
-
Starting with commit 7d9701db4089 ("cmd: mdio/mii: add Kconfig help and
allow break dependency"), CMD_MDIO depends on the PHYLIB Kconfig which
should be enabled properly from the Kconfig and not through any define
from a header file.Move all LS1088AQDS configs to enable PHYLIB and related through
Kconfig options. Also, remove the defines from the header file so that
we do not redefine the same symbol.Signed-off-by: Ioana Ciornei
-
Starting with commit 7d9701db4089 ("cmd: mdio/mii: add Kconfig help and
allow break dependency"), CMD_MDIO depends on the PHYLIB Kconfig which
should be enabled properly from the Kconfig and not through any define
from a header file.Move all LS1088ARDB configs to enable PHYLIB and related through
Kconfig options. Also, remove the defines from the header file so that
we do not redefine the same symbol.Signed-off-by: Ioana Ciornei
03 Nov, 2020
3 commits
-
Check for NULL return value from fdt_getprop() in fdt_fixup_remove_jr()
Signed-off-by: Priyanka Singh
-
Add check for return value of adjust_vdd()
Signed-off-by: Priyanka Singh
-
The sdhc peripheral clock support for lx2162aqds was missed.
Fixes: 1f9ecf088930 ("armv8: lx2162a: Add Soc changes to support LX2162A")
Signed-off-by: Yangbo Lu
29 Oct, 2020
19 commits
-
This adds default environment variable for ls1012aqds
Signed-off-by: Biwen Li
-
Add support of distro boot for ls1046aqds
Signed-off-by: Biwen Li
-
Drop useless environment variable installer and qspi_bootcmd
for ls1012afrwy.
Only 2 MB nor flash in ls1012afrwy. So cannot get kernel(30 MB) from
the nor flash, then drop it.Signed-off-by: Biwen Li
-
Initialize variable 'i2caddress' in adjust_vdd() to zero
Signed-off-by: Priyanka Singh
-
Enable writes to all commands for LTC3882
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for SoC LX2160A
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for LS208xA
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for LS1088A
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1028A
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1043A
Signed-off-by: Biwen Li
-
Enable CONFIG_MPC8XXX_GPIO for SoC LS1012A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS208xA
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1088A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1046A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1043A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1028A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1012A
Signed-off-by: Biwen Li
-
Add gpio node for SoC LS1021A
Signed-off-by: Biwen Li
-
Fix a bug as belows,
=> gpio status -a
"Synchronous Abort" handler, esr 0x96000061
elr: 0000000082047964 lr : 0000000082047960 (reloc)
elr: 00000000fbd72964 lr : 00000000fbd72960
x0 : 00000000ffffffff x1 : 000000000000000a
x2 : 0000000000000020 x3 : 0000000000000001
x4 : 0000000000000000 x5 : 0000000000000030
x6 : 0000000000000020 x7 : 0000000000000002
x8 : 00000000ffffffe0 x9 : 0000000000000008
x10: 0000000000000010 x11: 0000000000000006
x12: 000000000001869f x13: 0000000000000230
x14: 00000000fbc23e9c x15: 00000000ffffffff
...
resetingSigned-off-by: Biwen Li
19 Oct, 2020
6 commits
-
Since the HDP will be shared with i.MX. Move the common HDP library
codes to "driver/video/nxp/hdp" directory.
And use platform specified directory "driver/video/nxp/layerscape"
for LS driver codes and configurations.Signed-off-by: Ye Li
Reviewed-by: Alison Wang -
Initialize variable 'i2caddress' in print_vdd() to zero
Signed-off-by: Priyanka Singh
-
Add lpuart config to enable lpuart feature.
Signed-off-by: Vabhav Sharma
Signed-off-by: Yuantian Tang . -
Rename fsl-ls1028a-qds.dts to fsl-ls1028a-qds.dtsi so that
it can be used as common device tree for lpuart and duart.
Add lpuart device tree and duart device tree respectively
for qds which are used with duart and lpuart console.Signed-off-by: Vabhav Sharma
Signed-off-by: Yuantian Tang -
Add lpuart nodes to enable lpuart feature
Signed-off-by: Vabhav Sharma
Signed-off-by: Yuantian Tang -
mux changes in board file to enable lpuart1 and macro
define for lpuart1 used for mux changes in board configuation
register 13Signed-off-by: Vabhav Sharma
Signed-off-by: Yuantian Tang
