11 Dec, 2020
4 commits
-
If the target device have DOS partition, uboot will save the partition
type as dos partition at early stage when the driver bind the device.
After the gpt partition is flashed, uboot will try to reload the DOS
partition, instead of the the EFI partition.In this commit, if the GPT partition is successfully flashed, set the
partition type to be PART_TYPE_EFI if necessary, so the EFI partitions
will be reloaded.Change-Id: I6095cb56c73aecee24f76d169db89daba3783e29
Signed-off-by: faqiang.zhu
(cherry picked from commit 62becd667e5f3ebbefef796818eda78f4d0e167b) -
Fix below build warning when enabling BEE config on iMX6UL EVK board.
arch/arm/mach-imx/mx6/bee.c: In function ‘bee_test’:
arch/arm/mach-imx/mx6/bee.c:201:2: warning: implicit declaration of
function ‘flush_dcache_range’; did yomean ‘check_cache_range’?
[-Wimplicit-function-declaration]
201 | flush_dcache_range(address, address + range);
| ^~~~~~~~~~~~~~~~~~
| check_cache_rangeSigned-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 134d22e59af3931d283c123c1aa3fc44cb86761d) -
blk_dwrite() will write data in blocks, padding the keyslot_package
struct to one block to avoid redundant data write.Test: RPMB key set.
Change-Id: I326d7f4394d15e6e22b12c3abd6a5e2de18920cc
Signed-off-by: Ji Luo
(cherry picked from commit 8a0deb19628d2752b516fbce00fc1b988f2e78b5) -
evk_7ulp images has normal ramdisk in boot.img and recovery ramdisk in
recovery.img.Normal ramdisk in boot.img is used to boot up Android, ramdisk addr need
to be passed to kernel any way.Recovery ramdisk in recovery.img is not used to boot up Android, there
is no need to pass "androidboot.force_normal_boot=1".Change-Id: Id1e9c31035cbf65cd325c70a0aa9df05ea1d90b2
Signed-off-by: faqiang.zhu
(cherry picked from commit 3f4d826944f7f0db9251cf26f6f65014ca3f5e8a)
20 Nov, 2020
2 commits
-
Use the struct lpspi when it is not a NULL ptr.
Reviewed-by: Fugang Duan
Signed-off-by: Clark Wang
(cherry picked from commit 697198f65dba420534e8df1d5443f0b0869cc31f) -
TEE memory region are moved to 0x56000000 ~ 0x58000000 to
support i.MX 8MN DDR3L board:TEE-619 imx: 8mn: add support for i.MX 8MN DDR3L EVK
DD3L EVK board only has 512MB of DDR.
move OP-TEE mapping for all the 8MN boards.Signed-off-by: Silvano di Ninno
Adjust the fastboot buffer region to avoid conflicts.
Test: Super partition flash on imx8mn.
Change-Id: I56bd0194f24f9f267f436b4b6d762948d96bf815
Signed-off-by: Ji Luo
(cherry picked from commit e70c3875de6060cd3ab983fdc6cc207c45e646a7)
19 Nov, 2020
3 commits
-
To avoid u-boot MMU table overlap M4 RPMSG vring buffer, reserve
the top 1MB DDR.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit e00224b10c9ce10c76fa9ba452d88565bee7024a) -
To avoid u-boot MMU table overlap M4 RPMSG vring buffer. Reserve
the top 1MB DDR when bootaux is enabled.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 44cf26781117c484e5f7e46fe6008c0b31c297e4) -
When booting with M4 RPMSG demo in u-boot, the M4 will use top 1MB
DDR for RPMSG vring buffer. This overlaps with u-boot MMU table and
modifies some MMU entries.
On mx7dsabresd, this cause u-boot failed to access LCDIF registers
due to the wrong MMU entries.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 8a03d17c92cc04765c6b93f716ea081486fd15f0)
16 Nov, 2020
5 commits
-
Low drive mode needs to update GPU freq in kernel DTB. But 5.4 and 5.10
kernel are using different GPU node pathes. Update low_drive_gpu_freq
to support both two paths.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit cb1c6e4279030b859133b9e4e4a0fb2c3e3cd45c) -
For dual core and single core iMX8M parts, the thermal node and PMU node
in kernel DTB also needs update to remove the refers to deleted core nodes.
Otherwise both driver will fail to work.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 5434603dc85553f353a127594ca764c06e54de0a) -
There are 3 part numbers for 11x11 i.MX8MNano with different core number
configuration: UltraLite Quad/Dual/SoloComparing with i.MX8MN Lite parts, they have MIPI DSI disabled. So
checking the MIPI DSI disable fuse to recognize these parts.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 05af9ac08052c92d011908726534e227db3143c4) -
On imx6Q/imx6DL, we find if config the DTOCV to 0~3, it will impact
cmd6 behavior, after cmd6 get transfer complete interrupt, the data0
line will keep low over 5 seconds. This should be a IC bug on imx6Q/DL.
For other platforms, do not has this issue.To fix this issue, fix the DTOCV to 0xE, the max setting, this also align
with Linux configuration.Signed-off-by: Haibo Chen
Reviewed-by: Ye Li
(cherry picked from commit 6df53e27277d43353cfffd895b7b1c1e1b847ab3) -
Since optee has moved to 0x56000000 on iMX8MN EVK. So mtest address
will conflict with optee and u-boot relocation. Set the mtest space
after the optee reserved region and adjust size for 1GB DDR3L EVK.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 96d1791189f1cd4a81e77f7b39d21fa160236981)
09 Nov, 2020
7 commits
-
Add "cpufreq.default_governor=SCHEDUTIL" to iMX8QM MEK bootargs, so that
v5.10 kernel can uses schedutil cpufreq governor as default.Signed-off-by: Ye Li
Reviewed-by: Anson Huang -
Two LCD data pins (D16 and D17) are missed in DTS to cause color issue,
also update pad setting to align with kernel.Signed-off-by: Ye Li
Acked-by: Peng Fan
(cherry picked from commit 90cf964cb4daebd66d5b8b0af944e2a2282b13d5) -
The value of Unique ID in uboot and kernel is different for iMX8MP:
serial#=02e1444a0002aaff
root@imx8mpevk:/sys/devices/soc0# cat soc_uid
D699300002E1444AThe reason is that Fuse Addresses of Unique ID of iMX8MP are 0x420 and
0x430.Reviewed-by: Ye Li
Signed-off-by: Alice Guo
(cherry picked from commit 38bcdd0bf78951480cb67e1b9d58b37c364195fc) -
Since iMX8MP LPDDR4 EVK uses OD for VDD_SOC, so we can set GIC clock
to 500Mhz to align with kernel. For DDR4 EVK, uses default 400Mhz for
ND VDD_SOC.
Move the codes from SOC codes to board level to match with voltage
setting.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit ba50b01b74873cbddaeba61f69e7763a8ba63227) -
Because DDR4 runs at 3200MTS, this speed does not require to use overdrive
voltage for VDD_SOC, so set VDD_SOC to nominal 0.85v on DDR4 EVK.
The VDD_ARM was set to 0.95v to avoid timing risk from SOC to ARM when
VDD_SOC is 0.95v, set it back to 0.85v as well.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 5d556b8e214739deb5c3c71efa2ea8fc28f2a643) -
imx8mp has serial number as all zeros, hard code the BT mac
address for such case instead of setting it by property.Test: BT on imx8mp.
Change-Id: I99f5b49164e1fa40c7fc6ecb639c71fa89158852
Signed-off-by: Ji Luo
(cherry picked from commit 501690cb93c4df30700c1bf40f0f2eaed2444503) -
GCC for arm32 doesn't support division between signed
and unsigned integer. Clean up the code to use 'long'
for both arm32 and arm64 platforms.Test: build on 7ulp and 8mm.
Change-Id: I21c23b1948994558237b27bfe7452e78e3d45172
Signed-off-by: Ji Luo
(cherry picked from commit 2062183df063e0653e9e88a690764647702af7dd)
06 Nov, 2020
9 commits
-
Update fuse path to disable modules correctly.
Reviewed-by: Ye Li
Signed-off-by: Peng Fan
(cherry picked from commit b414e6dfc20ec6430ab1069139d59e11dff0f5dd) -
Update node path for 5.10 Kernel.
- aips-bus renamed to bus
- gpmi-nand renamed to nand-controllerReviewed-by: Ye Li
Signed-off-by: Peng Fan
(cherry picked from commit 51ee59aa02cb0a88c64604faecd5b01022af5182) -
Following Linux, set GIC clk to 500M. If U-Boot has different settings
compared with kernel required, kernel will dump. However we could not
let kernel runtime change GIC clk parents, because it is CLK_IS_CRITICAL
and CLK_SET_PARENT_GATE, it will always fail. There is no otherway
to address the issue unless let U-Boot configure it ready.Reviewed-by: Ye Li
Signed-off-by: Peng Fan
(cherry picked from commit b6ddbcb9dc61e8822899349fc516d06941e7efd6) -
Use a dedicated defconfig for LCDIF splash screen to resolve conflict.
Update board codes to add relevant configs and control mux for LCDIF pins.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit b561b31da6aeafd189f0fa29d8d6b8c3fe28d1c9) -
Because LCDIF has lots of pinmux conflict with modules like eQOS, SPI,
ADC, LPUART1, etc. We can't support it by default.
Introduce a new DTS for LCDIF enablement and disable conflicted nodes.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 39840421d4e2d805df1420658629e78925f41490) -
Support iMX8DXL in mxsfb driver by below changes:
1. Enable iMX8 in lcdif registers file
2. Add u-boot clock driver support for iMX8
3. Change the FB buffer alignment to align it at allocation. So
it won't overlay with other memory at mmu_set_region_dcache_behaviourSigned-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit 6f02d6894509e0aa79df9d1bdf5029136e1493b5) -
Update the LCDIF clocks to align with u-boot clock driver.
Since u-boot imx8 clock driver can gate and divide on slice clock,
so it does not create two clocks on slice clock.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit c5fddad29b23cd74732b6aa3720bd8d62f41462e) -
Add relevant clocks tree for LCDIF. According to design, LCDIF has
a slice and a dedicated eLCDIF PLL for pixel clock.
On iMX8QXP, there is pixel link mux which is muxed with LCDIF IOs.
It uses slice bypass reference clock for pix clock input.Signed-off-by: Ye Li
Reviewed-by: Peng Fan
(cherry picked from commit c189dad00743c7a3fcd80d716498289fa7cb2c40) -
AVB verify should fail for GKI boot image but we should allow it
continue to boot in UNLOCKED state. In such case, we should not
update the stored rollback index.This commit will update the rollback index only when the AVB
verify is OK to prevent rollback index check error.Test: boots.
Signed-off-by: Ji Luo
Change-Id: I82678d288edd4df6de40a1ca863ed36d3b3658a8
(cherry picked from commit ea48b544581d630bc031a7968a90b2fcf328424a)
30 Oct, 2020
10 commits
-
Signed-off-by: Ye Li
-
This is a workaround.
Always open the regulator of the sensor to ensure that the
pull-up of i2c3 is 3.3v. Otherwise, there will be a 1.8v high level
pull-up before enable sensor regulator in kernel boot stage.Reviewed-by: Fugang Duan
Signed-off-by: Clark Wang
(cherry picked from commit 6db6c8bf1a60baad7032f92822a0030b077d3602) -
The 'offset' can be negative number passed from fsl_read_from_partition_multi(),
don't covert 'blksz' to 'uint64_t' as it will cause overflow when the 'offset'
is negative number.Test: mmc blk read with 'offset < 0'.
Signed-off-by: Ji Luo
Change-Id: Id1ce8e0c748dd280d70c1722cc7d17cc9646a4bb
(cherry picked from commit 077b448679b9ad2891495c7344ba99a6c10a59fb) -
add a configuration of "CONFIG_VIRTUAL_AB_SUPPORT" for evk_8mm and
evk_8mn ddr4 board, so the "CONFIG_ANDROID_DYNAMIC_PARTITION" can be
selected, and bootargs can be passed to kernel correctly.Signed-off-by: faqiang.zhu
Change-Id: I42a0356940d8e76b560f79ccf440c7ec6df09b90
(cherry picked from commit 0cdc937f7bdd2de16c9d7161fb46252ba8648e10) -
Add support for 'fastboot snapshot-update cancel', it cancels
the snapshot update process so erase/update partitions can
proceed.Test: run 'fastboot snapshot-update cancel'.
Signed-off-by: Ji Luo
Change-Id: Ic1dfaf09a27fecf6e14b7149aeb5e0a9a1d220c9
(cherry picked from commit 3074fbf88b1b654026608574b94fdd58426ae493) -
Add support for 'fastboot getvar snapshot-update-status', it
returns the snapshot update states.Test: run 'fastboot getvar snapshot-update-status'
Signed-off-by: Ji Luo
Change-Id: Ifd46410994b11c327373a35eb86d121f321e39ae
(cherry picked from commit 28c6cbec7fe9e613620e5d80b7b43d1ca6bdd9c6) -
Set the initial 'source_slot' in 'misc_virtual_ab_message' as
the current slot. At the same time, add slot checks before
erase data if virtual A/B is enabled.Test: virtual A/B update and erase.
Signed-off-by: Ji Luo
Change-Id: I84896335a95d9188b85e114037b470b3f4e7a209
(cherry picked from commit a522c2245c3e58adbbcb99c43e0917ce315cc1aa) -
To use dynamic partition feature in Android, recovery ramdisk is used to
mount the logical partitions and boot up Android.Define a configuration item "CONFIG_ANDROID_DYNAMIC_PARTITION", use it
to control the bootargs and whether ramdisk should be loaded instead of
"CONFIG_ANDROID_AUTO" because now Android auto also use dynamic
partition feature now.Move the definition of function "fastboot_setup_system_boot_args" under
the macro "CONFIG_CMD_BOOTA" to avoid build warnings.Signed-off-by: faqiang.zhu
Change-Id: I0b1cfe6120fc939e7f1a1eb600d8176c81edf129
(cherry picked from commit 972ccff86796e2b7f9a444d09550cd5e393cd93e) -
Use more safer refresh time value for 6GB LPDDR4 on this EVK board.
Update the parameters for every frequency point.Signed-off-by: Ye Li
Reviewed-by: Jacky Bai
(cherry picked from commit f0f496abb5d7bef031603d1c3ab5387facead209) -
1. align ddr4 Q0S settings to lpddr4
2. adjust PERFHPR1, PERFLPR1, PERFWR1 to reduce HPR,LPR, W
starving time to avoid display underrunSigned-off-by: Jian Li
Reviewed-by: Ye Li
(cherry picked from commit f0905916886bd45d1dc5d55b25839106457124f5)
