07 Oct, 2010
4 commits
-
The PCU_E board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot. Remove it.Signed-off-by: Wolfgang Denk
-
Fix warning:
pm9g45.c: In function 'pm9g45_macb_hw_init':
pm9g45.c:99: warning: unused variable 'pio'Signed-off-by: Wolfgang Denk
Cc: Ilko Iliev -
Fix warning:
pm9263.c: In function 'pm9263_macb_hw_init':
pm9263.c:99: warning: unused variable 'pio'Signed-off-by: Wolfgang Denk
Cc: Ilko Iliev -
There are some cases where "make depend" would always run when
entering a directory. This happened when both the $(SRCS) and
$(HOSTSRCS) lists were empty (which is for example typical for the
examples/api/ directory). Avoid this by making sure that a ".depend"
file gets always created, even if empty.Signed-off-by: Wolfgang Denk
Acked-by: Detlev Zundel
05 Oct, 2010
3 commits
04 Oct, 2010
11 commits
-
The GPIO 16 and 19 reconfiguration should be done once USB is initialized.
So moved the reconfiguration to the USB init function.Signed-off-by: Rupjyoti Sarmah
Signed-off-by: Stefan Roese -
I accidentally left these hacks in the code while doing the big header
cleanup. Let's remove it now.Signed-off-by: Stefan Roese
-
This patch changes the PPC4xx POST UART driver to use the common
NS16550 functions for receiving and sending. Additionally the
local function for SoC divisor setup are removed. Instead the
functions from arch/powerpc/cpu/ppc4xx/4xx_uart.c are used. This
removes code duplication.Also the common CONFIG_SYS_NS16550_COMx defines are now used
to describe the POST UART's.And a compile breakage is fixed, introduced by a git merge of
the ppc4xx/next branch into master. Now "ppc4xx.h" is moved to
"asm/ppc4xx.h". Fixed as well with this patch.Signed-off-by: Stefan Roese
-
Signed-off-by: Stefan Roese
-
This patch fixes a bug in fdt_fixup_nor_flash_node() when the reg
property has multiple reg tuples, like:reg = ;
In this case this function did not update the reg property correctly.
Signed-off-by: Stefan Roese
-
Signed-off-by: Stefan Roese
-
This patch brings the lwmon5 board support up-to-date. Here a
summary of the changes:lwmon5 board port related:
- GPIO's changed to control the LSB transmitter
- Reset USB PHY's upon power-up
- Enable CAN upon power-up
- USB init error workaround (errata CHIP_6)
- EBC: Enable burstmode and modify the timings for the GDC memory
- EBC: Speed up NOR flash timingslwmon5 board POST related:
- Add FPGA memory test
- Add GDC memory test
- DSP POST reworked
- SYSMON POST: Fix handling of negative temperatures
- Add output for sysmon1 POST
- HW-watchdog min. time test reworkedAdditionally some coding-style changes were done.
Signed-off-by: Sascha Laue
Signed-off-by: Stefan Roese -
Add support code for bluestone board wth APM821XX processor based.
This patch includes early board init, misc init, configure EBC,
initializes UIC, MAKEALL, board.cfg and MAINTAINERS file.Signed-off-by: Tirumala R Marri
-
APM821XX is a new line of SoCs which are derivatives of
PPC44X family of processors. This patch adds support of CPU, cache,
tlb, 32k ocm, bootstraps, PLB and AHB bus.Signed-off-by: Tirumala R Marri
Signed-off-by: Stefan Roese -
Signed-off-by: Wolfgang Denk
Cc: Heiko Schocher
Cc: Stefan Roese
Cc: Roderik Wildenburg -
Signed-off-by: Wolfgang Denk
03 Oct, 2010
22 commits
-
The OTP code does a little shuffling of arguments that aren't really
necessary, so use a local variable instead to fix build errors now
that the args[] parameter is const.Signed-off-by: Mike Frysinger
-
Building this board for parallel flash fills up the bss section and thus
fails to link, so bump up the monitor size a bit.Signed-off-by: Mike Frysinger
-
Rather than use a hardcoded "7", use the new Blackfin global define.
Signed-off-by: Mike Frysinger
-
The current size used (256KiB) is smaller than the LDR created for
the bf548-ezkit, so 'run update' doesn't work correctly. So bump
up the size a bit by making this flexible per-board config.Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
-
The board includes:
* ADSP-BF561 rev. 0.5
* 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG)
* Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell)
* SPI boot flash on PF2 (M25P64 8MB, or M25P128 16 MB)
* FPGA boot flash on PF3 (M25P64 8MB, or M25P128 16 MB)
* Spartan6-LX150 (memory-mapped; both PPIs also connected)
* See http://www.skutek.com/Signed-off-by: Wojtek Skulski
Signed-off-by: Mike Frysinger -
Since we're no longer extracting the env from the target ELF file (since
upstream wouldn't take that change), we're back to the problem of cpu
defines not properly propagating to the env setup stage. So the embedded
env built by the host compiler doesn't match the one that is linked into
the u-boot env.Reported-by: Vivi Li
Signed-off-by: Mike Frysinger -
The intention all along was to accept pin names irrelevant of their case.
But I guess I forgot to test/implement support for that.Signed-off-by: Mike Frysinger
-
We need to use the Blackfin BootROM-specific OOB layout when we boot out
of NAND as that is what the on-chip ROM expects.Also need to increase the monitor size a little to accommodate the extra
NAND code overhead.Signed-off-by: Mike Frysinger
-
We use the lock/unlock options in our default nand code, so enabl
support for the options.Reported-by: Vivi Li
Signed-off-by: Mike Frysinger -
Signed-off-by: Peter Meerwald
Signed-off-by: Mike Frysinger -
Let people easily override bootdelay and network settings.
Signed-off-by: Mike Frysinger
-
Make the GPIO command usable in a scripting environment by returning
the GPIO value rather than always 0.Signed-off-by: Mike Frysinger
-
Support for the Blackfin System Development Platform (SDP) base module.
Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
-
Signed-off-by: Peter Meerwald
Signed-off-by: Mike Frysinger -
The input sub command was missing from the help text, and it didn't show
the actual value currently read on the GPIO. This allows people to read
the value of input pins.Signed-off-by: Mike Frysinger
-
The CONFIG_BFIN_CPU option is largely used in the build system, so move
it out of the board config.h and into the board config.mk. It'd be nice
to keep everything in the config.h, but the patch to extract that value
early was rejected.Signed-off-by: Mike Frysinger
-
Only the BF561 port was using the common dual core headers, so merge them
into the BF561 specific headers.Signed-off-by: Mike Frysinger
-
Only the BF533 port was using the common extended headers, so merge them
into the BF533 specific headers.Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
