13 Sep, 2015
26 commits
-
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Heiko Schocher
Cc: Christian Gmeiner
Cc: Stefan Roese
Cc: Troy Kisky
Cc: Nikita Kiryanov
Cc: "Eric Bénard"
Cc: Fabio Estevam
Cc: Tim Harvey
Cc: Marek Vasut
Cc: Markus Niebel
Cc: Otavio Salvador
Acked-by: Stefan Roese
Acked-by: Marek Vasut
Acked-by: Christian Gmeiner
Acked-by: Markus Niebel
Acked-by: Troy Kisky
Acked-by: Igor Grinberg -
Old revisions of Utilite (a miniature PC based on cm-fx6) do not have
a card detect for mmc, and thus the kernel needs to be told that
there's a persistent storage on usdhc3 to force it to probe the mmc
card.Check the baseboard revision and modify the device tree accordingly
if needed.Cc: Stefano Babic
Cc: Igor Grinberg
Signed-off-by: Nikita Kiryanov -
Introduce cl_eeprom_get_product_name() for obtaining product name
from the eeprom.Cc: Stefano Babic
Cc: Igor Grinberg
Signed-off-by: Nikita Kiryanov -
cl_eeprom_read_mac_addr() doesn't differentiate between success case and
inability to access eeprom. Fix this by propagating the return value of
cl_eeprom_setup().Cc: Stefano Babic
Cc: Igor Grinberg
Signed-off-by: Nikita Kiryanov
Acked-by: Igor Grinberg -
Add support for selecting which eeprom is queried for board revision by
extending cl_eeprom_get_board_rev() to accept an i2c bus number.Cc: Stefano Babic
Cc: Igor Grinberg
Acked-by: Igor Grinberg
Signed-off-by: Nikita Kiryanov -
This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk,
the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are:
1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC.
2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk
supports 512MB DDR3
3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package.This patch add the following:
1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size()
2. Introduce a macro is_mx6ul_9x9_evk using
CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL
part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work,
so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with
mx6ul_14x14_evk. And we have no way to dymaically checking this chip
is 9x9 or 14x14.
3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations.
POWER related configurations also effect for mx6ul_14x14_evk. But
power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to
do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk.
4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM
configurations.
5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file
according to board_rev and board_name.
6. Add TARGET_MX6UL_9X9_EVK Kconfig entryBoot Log:
U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53)
reading u-boot.img
reading u-boot.imgU-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800)
CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU: Commercial temperature grade (0C to 95C) at 41C
Reset cause: POR
Board: MX6UL 9x9 EVK
I2C: ready
DRAM: 256 MiB
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net: FEC1
Hit any key to stop autoboot: 0Signed-off-by: Peng Fan
Cc: Stefano Babic -
We have CONFIG_MXC_OCOTP and CONFIG_CMD_FUSE in mx6_common.h,
discard duplicated macro definitions in board header files.Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Peter Robinson
Cc: Otavio Salvador -
This reverts commit 059323fb6a8f21637bb617919715c2427f24777c.
This commit 059323fb6a8f21637bb617919715c2427f24777c use JESD79-3E which
is not the newest spec. Should use JESD79-3F in which tRFC is 260ns for
4Gb chip.Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Tim Harvey -
Running mxsboot on a big-endian system produces a sd image which
cannot be started by the i.MX28 ROM. It complains on the debug
uart as following:
0x8020a009
0x80502008
0x8020a009
0x80502008
...Enforcing all fields within the BCB to little-endian make
the image bootable again.Signed-off-by: Michael Heimpold
Acked-by: Stefano Babic
Acked-by: Marek Vasut -
* Add i.MX7D SABRESD target board support with enabled modules:
UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX.Build target: mx7dsabresd_config
Signed-off-by: Peng Fan
Signed-off-by: Fugang Duan
Signed-off-by: Ye.Li
Signed-off-by: Adrian Alonso -
Add imx-common cpu support for imx7d SoC
- Update reset_cause for imx7d
- Enable watchdog driver built for imx7dSigned-off-by: Adrian Alonso
Signed-off-by: Peng Fan -
Add imx7 SoC thermal driver support
Signed-off-by: Adrian Alonso
-
Rework imx_set_wdog_powerdown to be reused by imx6 and imx7
Signed-off-by: Adrian Alonso
-
Extend init_aips to support imx7 SoC, use is_soc_type
and is_cpu_type to resolve at run time aips3 settingsSigned-off-by: Adrian Alonso
-
Add imx7d basic SoC system support
Misc arch dependent functions for system bring upSigned-off-by: Adrian Alonso
Signed-off-by: Peng Fan
Signed-off-by: Ye.Li -
* Add Clock control module (CCM) support
* iMX7D SoC introduces 3 main clock sysmtem abstraction for clock
root frequency generation denominated clock slices.
Core clock slice: hihg speed clock for ARM core
Bus clock slice: for bus clocks
IP clock slice: Peripheral clocks
* At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET
In u-boot, we have to:
- Configure PFD3- PFD7 for freq we needed in u-boot
- Set clock root for peripherals (ip channel)Signed-off-by: Adrian Alonso
Signed-off-by: Peng Fan
Signed-off-by: Ye.Li -
* Add system arch level header files
- imx-regs.h: iMX7D SoC system architecture registers
- crm_regs.h: Clock control module registers
- sys_proto.h: helper callback function for SoC setupSigned-off-by: Adrian Alonso
Signed-off-by: Peng Fan
Signed-off-by: Ye.Li -
Add system counter driver for imx7d and mx6ul
imx7 and imx6ul supports system counter timer as well as
GPT timer (arch/arm/imx-common/timer.c); The default for
imx7 is systemcounter timer.Signed-off-by: Ye.Li
Signed-off-by: Adrian Alonso -
Move common imx6 arch init setup, init.c can be extended
and reused to support imx7 SoC keeping init arch common
code.Signed-off-by: Adrian Alonso
-
Rework cache settings for imx6, move cache configuration
to imx-common/cache.c so it can be reused for newer SoCSigned-off-by: Adrian Alonso
-
Rework imx_thermal driver to be used across i.MX
processor that support thermal sensorSigned-off-by: Adrian Alonso
Signed-off-by: Peng Fan -
Add helper macro is_soc_type to identify iMX SoC family
Signed-off-by: Adrian Alonso
-
The MCV SoM has DDR3-1600 DRAMs on it, update the DRAM speed
to 400MHz to make use of these DRAMs completely.Signed-off-by: Marek Vasut
-
Commit 6a132416359e "ci_udc: Update the ci_udc driver to support bulk
transfers" caused the value of "len" to change without updating subsquent
users of that variable in ci_ep_submit_next_request(). This caused the
code that detects when to emit ZLPs (Zero Length Packets) never to
trigger, which in turn caused host timeouts when a ZLP was required,
which in turn broke tests/dfu/, even despite the assertion in that
commit's description that "These changes are tested for both the DFU and
lthor."Fix this by modifying the added dtd iteration code not to modify "len",
but rather to keep state in a separate variable. Rename the variables
while we're at it so they describe their purpose better.Fixes: 6a132416359e ("ci_udc: Update the ci_udc driver to support bulk transfers")
Cc: Siva Durga Prasad Paladugu
Signed-off-by: Stephen Warren -
Implement endpoint dequeue callback function.
Without this function, uboot will hang when executing fastboot comamnd.
See following flow:
"fastboot_tx_write_str->fastboot_tx_write->usb_ep_dequeue->ep->ops->dequeue"
without implement ci_udc dequeue function, ep->ops->dequeue is NULL, then
uboot will hang.Tested on mx6qsabresd board with fastboot enabled.
Signed-off-by: Peng Fan
Tested-by: Fabio Estevam
Cc: "Łukasz Majewski"
Cc: Marek Vasut
12 Sep, 2015
14 commits
-
The current simplify lpc32xx gpio driver implementation assume a
maximum of 32 GPIO per port; there are a total of 22 GPI, 24 GPO
and 6 GPIO to managed on port 3.Update the driver to fix the following:
1) When requesting GPI_xx and GPO_xx on port 3 (xx is the same number)
the second call to "gpio_request" will return -EBUSY.2) The status of GPO_xx pin report the status of the
corresponding GPI_xx pin when using the "gpio status" command.3) The gpio driver may setup the direction register for the wrong
gpio when calling "gpio_direction_input" (GPI_xx) or
"gpio_direction_output" (GPO_xx) on port 3; the call to the
direction is require to use the "gpio status" command.The following change were done in the driver:
1) port3 GPI are cache in a separate 32 bits in the array.
2) port3 direction register written only for GPIO pins.
3) port3 GPO & GPIO (as output) are read using "p3_outp_state".
4) LPC32XX_GPI_P3_GRP updated to match the change.Signed-off-by: Sylvain Lemieux
-
Define CONFIG_MACH_TYPE to allow non DT Linux boot.
Signed-off-by: Dmitry Lifshitz
Acked-by: Igor Grinberg -
Mainline CM-T3517 U-Boot environment size differs from that one
shipped with CM-T3517 boards.Update environment size, to avoid backward compatibility issues.
Signed-off-by: Dmitry Lifshitz
Acked-by: Igor Grinberg -
Fix MMC1 pinmux setup, thus enable SD/MMC card support with CM-T3517.
Signed-off-by: Dmitry Lifshitz
Acked-by: Igor Grinberg -
SBC-T3517 evaluation board has two Eth interfaces.
Enable network retry of another interface if the default if failed
or disconnected.Add 'netretry=yes' in the default env. Setup relevant
timeout values in the board config file.Signed-off-by: Dmitry Lifshitz
Acked-by: Igor Grinberg -
introduce BIT() definition, used in at91_udc gadget
driver.Signed-off-by: Heiko Schocher
[remove all other occurrences of BIT(x) definition]
Signed-off-by: Andreas Bießmann
Acked-by: Stefan Roese
Acked-by: Anatolij Gustschin -
Since last API changes for files >2GB, the read of symlink is broken as
ext4fs_read_file now returns 0 instead of the length of the actual read.Signed-off-by: Gary Bisson
-
This patch changes a little bit the environment, current environment was broken
for a long time, and board don't as expected sometimes, on production systems
this is fixed adding boot script. I think it's time to change this to make a
system conformant environment and use generic distro configurations and
environment instead. We can use a boot script for the old way boot mode.Signed-off-by: Enric Balletbo i Serra
-
Signed-off-by: Enric Balletbo i Serra
-
Add support for Lightwriter SL50 series board, a small, robust and portable
Voice Output Communication Aids (VOCA) designed to meet the particular and
changing needs of people with speech loss resulting from a wide range of
acquired, progressive and congenital conditions.Signed-off-by: Enric Balletbo i Serra
-
This allows transferring data directly to/from RAM. For example, one
could create a boot script that starts DFU on a RAM region, then once
DFU exits (which is under the control of the attached USB host, via a
USB bus reset), uses the code/data that was received over DFU.Signed-off-by: Stephen Warren
-
Writing to files is a useful feature in general, so enable it everywhere.
The primary purpose is to make DFU useful on filesystems in addition to
raw devices.Signed-off-by: Stephen Warren
-
CONFIG_SYS_DFU_DATA_BUF_SIZE defines the size of chunks transferred
across USB. This doesn't need to be particularly large, since it doesn't
limit the overall transfer size.CONFIG_SYS_DFU_MAX_FILE_SIZE is used to buffer an entire file before
writing it to a filesystem. This define limits the maximum file size that
may be transferred. Bump this up to 32MiB in order to support large
uncompressed kernel images.Both of these buffers are dynamically allocated, and so the size of both
needs to be taken into account when calculating the required malloc
region size.Signed-off-by: Stephen Warren
-
Commit 52a7c98a1772 "tegra-common: increase malloc pool len by dfu mmc
file buffer size" updated the definition of CONFIG_SYS_MALLOC_LEN for
Tegra to take account of the DFU buffer size. However, this change had
no effect, since typical Tegra board config headers don't set the DFU-
related defines until after tegra-common.h is included. Fix this by
moving the affected conditional code to tegra-common-post.h, which is
included last. Also move the definition of SYS_NONCACHED_MEMORY since
it's a related and adjacent definition.Fix the condition to test for the DFU feature, rather than specifically
MMC DFU support, so it applies in all cases.Signed-off-by: Stephen Warren
