04 Dec, 2017
1 commit
-
This header was renamed to rawnand.h in Linux.
The following is the corresponding commit in Linux.
commit d4092d76a4a4e57b65910899948a83cc8646c5a5
Author: Boris Brezillon
Date: Fri Aug 4 17:29:10 2017 +0200mtd: nand: Rename nand.h into rawnand.h
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.Signed-off-by: Masahiro Yamada
06 Nov, 2017
1 commit
-
As part of my usual round of build testing, output about missing
MAINTAINERS information was not logged, and thus often overlooked.
Correct that mistake by ensuring that I log the output of
genboardscfg.py every time. As part of that, address a number of
missing MAINTAINERS entires. In the case of a missing file, I have put
the original submitter down. In the rest of the cases I have added the
config (and sometimes relevant header file) to the existing set of file
globs.Signed-off-by: Tom Rini
27 Aug, 2017
2 commits
-
Update igep00x0 code with the following features:
- Add board and revision detection for the boards:
- IGEP0020-RF
- IGEP0020-RC
- IGEP0030-RG
- IGEP0030-RE
- Merge IGEP0020 and IGEP0030 mux tables
- Add suport to use GPIO_126, GPIO_127 and GPIO_129
- board_name and board_rev environment variables display board and
revision informations
- Move dtb name selection from code to boot scriptSigned-off-by: Pau Pajuelo
Signed-off-by: Ladislav Michl
Tested-by: Pau Pajuelo -
Avoid cluttering board file with CONFIG_SPL_BUILD ifdefs
by moving SPL related functions into separate file.Signed-off-by: Ladislav Michl
Tested-by: Pau Pajuelo
Acked-by: Enric Balletbo i Serra
16 Aug, 2017
3 commits
-
Rename this function for consistency with env_get().
Signed-off-by: Simon Glass
-
Rename this function for consistency with env_set().
Signed-off-by: Simon Glass
-
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.Suggested-by: Wolfgang Denk
Signed-off-by: Simon Glass
07 Jul, 2017
1 commit
-
Implement spl_start_uboot to let Falcon mode work.
Signed-off-by: Ladislav Michl
Acked-by: Heiko Schocher
15 May, 2017
1 commit
-
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature. Deprecate the
former.This commit was generated with the sed script 's/GENERIC_MMC/MMC/'
and manual fixup of drivers/mmc/Kconfig.Signed-off-by: Masahiro Yamada
08 May, 2017
3 commits
-
The IGEP SMARC AM335x is an industrial processor module with
following highlights:o AM3352 TI processor (Up to AM3359)
o Cortex-A8 ARM CPU
o SMARC form factor module
o Up to 512 MB DDR3 SDRAM / 512 MB FLASH
o WiFi a/b/g/n and Bluetooth v4.0 on-board
o Ethernet 10/100/1000 Mbps and 10/100 Mbps controller on-board
o JTAG debug connector available
o Designed for industrial range purposesSigned-off-by: Pau Pajuelo
Signed-off-by: Ladislav Michl
Tested-by: Pau Pajuelo -
Convert IGEP board to use UBI volumes for U-Boot, its environment and
kernel. With exception of first four sectors read by SoC BootROM whole
NAND is UBI managed.Signed-off-by: Ladislav Michl
Reviewed-by: Heiko Schocher
Tested-by: Pau Pajuelo -
Rename igep0033 to igep003x as IGEP SMARC AM335x module (igep0034)
can use the same source files.Signed-off-by: Ladislav Michl
Tested-by: Pau Pajuelo
20 Mar, 2017
1 commit
-
To keep a consistent MMC device mapping in SPL and in u-boot, let's
register the MMC controllers the same way in u-boot and in the SPL.
In terms of boot time, it doesn't hurt to register more controllers than
needed because the MMC device is initialized only prior being accessed for
the first time.
Having the same device mapping in SPL and u-boot allows us to use the
environment in SPL whatever the MMC boot device.Signed-off-by: Jean-Jacques Hiblot
15 Mar, 2017
1 commit
-
Leave only detected flash type enabled in FTD as otherwise GPMC CS is
claimed (and never freed) by Linux, causing 'concurent' flash type
not to be probed.Signed-off-by: Ladislav Michl
22 Jan, 2017
1 commit
-
Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.Tested boards: CL-SOM-AM57x, CM-T335
Signed-off-by: Uri Mashiach
20 Jan, 2017
1 commit
-
commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor"
breaks u-boot commandline working with long commands
sending to the board.Since the above patch, you have to setup the fcr register.
For board/archs which enable OF_PLATDATA, the new field
fcr in struct ns16550_platdata is not filled with a
default value ...This leads in not setting up the uarts fifo, which ends
in problems, when you send long commands to u-boots
commandline.Detected this issue with automated tbot tests on am335x
based shc board.The error does not popup, if you type commands. You need
to copy&paste a long command to u-boots commandshell
(or send a long command with tbot)Possible boards/plattforms with problems:
./arch/arm/cpu/arm926ejs/lpc32xx/devices.c
./arch/arm/mach-tegra/board.c
./board/overo/overo.c
./board/quipos/cairo/cairo.c
./board/logicpd/omap3som/omap3logic.c
./board/logicpd/zoom1/zoom1.c
./board/timll/devkit8000/devkit8000.c
./board/lg/sniper/sniper.c
./board/ti/beagle/beagle.c
./drivers/serial/serial_rockchip.cSigned-off-by: Heiko Schocher
Signed-off-by: Ladislav Michl
Tested-by: Adam Ford
Reviewed-by: Tom Rini
15 Jan, 2017
2 commits
-
Boards with NAND and OneNAND are supported by single configuration,
thus remove now obsolete IGEP0020_NAND BOARD entry.Signed-off-by: Ladislav Michl
-
SPL partition size depends on sector size and we want kernel to use
the same layout, so let U-Boot modify FDT accordingly.Signed-off-by: Ladislav Michl
14 Nov, 2016
2 commits
-
Tested on IGEPv2 with Micron MT29F4G16ABBDA3W and
Hynix H27S4G6F2DKA-BMSigned-off-by: Ladislav Michl
Reviewed-by: Javier Martinez Canillas
Tested-by: Javier Martinez Canillas -
As a single U-Boot binary can now run on various board modifications,
drop CONFIG_DISPLAY_BOARDINFO as it prints flash memory information
too early to give us chance to easily detect it. Also saves few bytes
as a bonus.Signed-off-by: Ladislav Michl
Reviewed-by: Javier Martinez Canillas
Tested-by: Javier Martinez Canillas
23 Jul, 2016
7 commits
-
Implement spl_start_uboot to let Falcon mode work.
Signed-off-by: Ladislav Michl
Reviewed-by: Heiko Schocher
Acked-by: Enric Balletbo i Serra -
Signed-off-by: Ladislav Michl
-
Signed-off-by: Ladislav Michl
-
Signed-off-by: Ladislav Michl
-
Signed-off-by: Ladislav Michl
-
Signed-off-by: Ladislav Michl
-
Signed-off-by: Ladislav Michl
15 Mar, 2016
1 commit
-
A few boards still use ns16550_platdata structures, but assume the structure
is going to be in a specific order. By explicitly naming each entry,
this should also help 'future-proof' in the event the structure changes.Tested on the Logic PD Torpedo + Wireless.
I only changed a handful of devices that used the same syntax as the Logic
board. Appologies if I missed one or stepped on toes. Thanks to Derald Woods
and Alexander Graf.Signed-off-by: Adam Ford
V6: Add fix to arch/arm/cpu/armv7/am33xx/board.c
V5: Add fix to arch/arm/cpu/arm926ejs/lpc32xx/devices.c
V4: Fix subject heading
V3: Remove reg_offset out in all the structs. It was reverted out, and and if
it did exist, it would get initialized to 0 by default.V2: I hastily copy-pasted the boards without looking at the UART number.
This addresses 3 boards that use UART3 and not UART1.
Reviewed-by: Mugunthan V N
Reviewed-by: Simon Glass
20 Jan, 2016
1 commit
-
- move chip reset to separate function
- use CONFIG_SMC911X_BASE instead of hardcoded value
- remove unneeded local variable from board_eth_init.Signed-off-by: Ladislav Michl
Reviewed-by: Tom Rini
Acked-by: Enric Balletbo Serra
Reviewed-by: Heiko Schocher
22 Nov, 2015
1 commit
-
Unify serial_omap, and use the generic binding.
Signed-off-by: Thomas Chou
Reviewed-by: Tom Rini
Acked-by: Simon Glass
23 Oct, 2015
1 commit
-
This introduces omap_die_id_display to display the full die id.
There is no need to store it in an environment variable, that no boot script
is using anyway.Signed-off-by: Paul Kocialkowski
Reviewed-by: Tom Rini
12 Sep, 2015
2 commits
-
This patch changes a little bit the environment, current environment was broken
for a long time, and board don't as expected sometimes, on production systems
this is fixed adding boot script. I think it's time to change this to make a
system conformant environment and use generic distro configurations and
environment instead. We can use a boot script for the old way boot mode.Signed-off-by: Enric Balletbo i Serra
-
Signed-off-by: Enric Balletbo i Serra
19 Apr, 2015
2 commits
-
Use "_ethaddr" at the end of variables and drop CamelCase.
Make constant values actually 'const'.Signed-off-by: Joe Hershberger
Acked-by: Simon Glass -
As mentioned in the previous commit, adding default values in each
Kconfig causes problems because it does not co-exist with the
"depends on" syntax. (Please note this is not a bug of Kconfig.)
We should not do so unless we have a special reason. Actually,
for CONFIG_DM*, we have no good reason to do so.Generally, CONFIG_DM is not a user-configurable option. Once we
convert a driver into Driver Model, the board only works with Driver
Model, i.e. CONFIG_DM must be always enabled for that board.
So, using "select DM" is more suitable rather than allowing users to
modify it. Another good thing is, Kconfig warns unmet dependencies
for "select" syntax, so we easily notice bugs.Actually, CONFIG_DM and other related options have been added
without consistency: some into arch/*/Kconfig, some into
board/*/Kconfig, and some into configs/*_defconfig.This commit prefers "select" and cleans up the following issues.
[1] Never use "CONFIG_DM=n" in defconfig files
It is really rare to add "CONFIG_FOO=n" to disable CONFIG options.
It is more common to use "# CONFIG_FOO is not set". But here, we
do not even have to do it.
Less than half of OMAP3 boards have been converted to Driver Model.
Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is
weird. Instead, add "select DM" only to appropriate boards, which
eventually eliminates "CONFIG_DM=n", etc.[2] Delete redundant CONFIGs
Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again
in configs/sandbox_defconfig.
Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and
defines it also in omap3_beagle_defconfig and devkit8000_defconfig.Signed-off-by: Masahiro Yamada
25 Feb, 2015
1 commit
-
Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.Signed-off-by: Masahiro Yamada
13 Feb, 2015
1 commit
-
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.Signed-off-by: Simon Glass
30 Jan, 2015
1 commit
-
Use the STATUS_LED APIs for indicating a boot progress instead of
show_boot_progress.This patch also fixes a problem introduced with commit b3f4ca1135 (dm: omap3:
Move to driver model for GPIO and serial). After that commit the board doesn't
boot. Looks like the problem is the gpio_request call inside the function
show_boot_progress.Signed-off-by: Enric Balletbo i Serra
05 Dec, 2014
1 commit
-
Boards using the TWL4030 regulator may not all use the LDOs the same way
(e.g. MMC2 power can be controlled by another LDO than VMMC2).
This delegates TWL4030 MMC power initializations to board-specific functions,
that may still call twl4030_power_mmc_init for the default behavior.Signed-off-by: Paul Kocialkowski
Reviewed-by: Tom Rini
[trini: Fix omap3_evm warning, add twl4030.h]
Signed-off-by: Tom Rini
29 Oct, 2014
1 commit
-
This commit introduces a Kconfig symbol for each ARM CPU:
CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
for CPU_ARM1176 and CPU_V7.For each target, the corresponding CPU is selected and the definition of
SYS_CPU in the corresponding Kconfig file is removed.Also, it removes redundant "string" type in some Kconfig files.
Signed-off-by: Georges Savoundararadj
Acked-by: Albert ARIBAUD
Cc: Masahiro Yamada
