11 Nov, 2014
2 commits
10 Nov, 2014
1 commit
-
Signed-off-by: Sonic Zhang
08 Nov, 2014
2 commits
-
Signed-off-by: Anatolij Gustschin
07 Nov, 2014
11 commits
-
Add support for splash screen on both DVI and SCF0403 LCD.
Signed-off-by: Igor Grinberg
Reviewed-by: Tom Rini -
Add both EMAC and SMC911x support.
Signed-off-by: Igor Grinberg
Reviewed-by: Tom Rini -
Add both host and mUSB support.
Currently, the selection between host USB and mUSB is done through the
config file.Signed-off-by: Igor Grinberg
Reviewed-by: Tom Rini -
CompuLab cm-t3517 is Computer on Module (CoM) based on AM3517 SoC.
Features: up to 256MB DDR2, up to 512MB NAND, USB hub, mUSB, WiFi, BT,
Analog audio codec, touch screen controller, LED.Add basic support including:
LED, Serial console, NAND, MMC, GPIO, I2C, 256MB DRAM.Signed-off-by: Igor Grinberg
-
The keystone2 evm can boot from USB partition with FAT32 FS, so
enable generic load command and fatload command usage.Acked-by: Murali Karicheri
Signed-off-by: Ivan Khoronzhuk
Reviewed-by: Tom Rini -
The Multicore Software Development Kit (MCSDK) provides foundational
software for TI KeyStone II device platforms. It's supposed to be used
with uboot, and it's convenient to have the same names for images, so
correct environment image names according to the last MCSDK3.Signed-off-by: Ivan Khoronzhuk
Reviewed-by: Tom Rini -
Currently to customize env for various ks2 boards, individual
variables such as NAME_FS etc are defined and included in the
common config.h to define CONFIG_EXTRA_ENV_SETTINGS. This
doesn't scale well if a variable is not applicable on a
specific board. Using this scheme, we have to define variables
with empty value and it's ugly. Instead, to allow board specific
customization of default env variable, define a common
CONFIG_EXTRA_ENV_KS2_SETTINGS for all common variables and define
board specific variables in individual board specific config.h
using CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS. Use the common and board
specific variables to define CONFIG_EXTRA_ENV_SETTINGS. This way
more variables can be added in future for individual boards
without affecting the other config.h files.Signed-off-by: Murali Karicheri
Signed-off-by: Ivan Khoronzhuk
Reviewed-by: Tom Rini -
To allow out of box demo, change default boot mode to ubi
boot now that NAND is functional in latest EVMs.Signed-off-by: Murali Karicheri
Signed-off-by: Ivan Khoronzhuk
Reviewed-by: Tom Rini -
The UBI volume name has to be prefixed with "ubi:".
Signed-off-by: Ivan Khoronzhuk
Reviewed-by: Tom Rini -
… is now in ti_armv7_common.h
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: Tom Rini <trini@ti.com> -
Signed-off-by: Guillaume GARDET
Cc: Tom Rini
Reviewed-by: Tom Rini
06 Nov, 2014
6 commits
-
This patch adds network support code and enables keystone_net
driver usage for k2l_evm evaluation board.Acked-by: Murali Karicheri
Signed-off-by: Hao Zhang
Signed-off-by: Ivan Khoronzhuk -
Keystone2 Lamar SoC uses the same keystone SerDes driver.
All Keystone2 EVM boards currently use SerDes driver, so move
CONFIG_TI_KEYSTONE_SERDES to common configuration file.Acked-by: Murali Karicheri
Signed-off-by: Ivan Khoronzhuk -
Signed-off-by: Dileep Katta
[trini: Rework so that am335x_evm_usbspl still builds]
Signed-off-by: Tom Rini -
Signed-off-by: Paul Kocialkowski
05 Nov, 2014
6 commits
-
Add a driver for the designware serial UART used on sunxi. This just
redirects to the normal ns16550 driver.Add a stdout-path to the device tree so that the correct UART is chosen.
Signed-off-by: Simon Glass
Signed-off-by: Hans de Goede -
This adds driver model support to the sunxi GPIO driver, using the device
tree to trigger binding of the driver. The driver will still operate
without driver model too.Signed-off-by: Simon Glass
Signed-off-by: Hans de Goede -
For now we won't want to mess with the existing configurations. Create a
new one which will enable device tree and driver model. Note that this
brings the device tree binary into u-boot-sunxi-with-spl.bin.Signed-off-by: Simon Glass
Signed-off-by: Hans de Goede -
These are from Linux 3.17-rc7 (commit fe82dcec). U-Boot only uses a small
portion of these, but we may as well have something to look forward to.The total compiled size is about 25KB.
Acked-by: Hans de Goede
Signed-off-by: Simon Glass
Signed-off-by: Hans de Goede -
Mostly automatic with:
sed -i -e 's/CONFIG_\(SUN[45678]I\)/CONFIG_MACH_\1/g' $(git grep -l CONFIG_SUN[45678]I)
followed by removing the relevant #defines from include/configs/sun?i.h by
hand.Signed-off-by: Ian Campbell
Reviewed-by: Hans de Goede
Signed-off-by: Hans de Goede -
While at it, sort them.
Cc: Tom Rini
Cc: Simon Glass
Signed-off-by: Jeroen Hofstee
04 Nov, 2014
8 commits
-
Signed-off-by: Hans de Goede
-
Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
This adds support for USB commands and USB storage device.
Signed-off-by: Yoshiyuki Ito
Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM.
The default boot address is 0x70000000.Signed-off-by: Hisashi Nakamura
Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM.
The default boot address is 0x70000000.Signed-off-by: Hisashi Nakamura
Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
If CONFIG_RMOBILE_EXTRAM_BOOT is enabled, U-Boot is booted from External RAM.
The default boot address is 0xB0000000.Signed-off-by: Hisashi Nakamura
Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
03 Nov, 2014
4 commits
-
155fa9af95a "spi: mxc: fix sf probe when using mxc_spi" break
spi flash detection on the aristainetos board. Fix this.Signed-off-by: Heiko Schocher
-
On mx6 sabreauto board, there are two USB ports:
0: OTG
1: HOST
The EHCI driver is enabled for this board, but the IOMUX and VBUS power
control is not implemented, which cause both USB port failed to work.
This patch fix the problem by adding the board support codes.Since the power control uses the GPIO pin from port expander MAX7310,
the PCA953X driver is enabled for accessing the MAX7310.The ID pin of OTG Port needs to configure the GPR1 bit 13 for selecting
its daisy chain. Add a new function "imx_iomux_set_gpr_register" to
handle GPR register setting.Signed-off-by: Ye.Li
-
There are three SD/MMC sockets on mx6slevk boards. Implements the
full support for them.
The default boot socket is USDHC2, so the MMC environment is set
to that device.Signed-off-by: Ye.Li
-
Set the CONFIG_MXC_GPT_HCLK configuration in mx6_common.h, so that
24Mhz OSC clock source will be selected for GPT on all MX6 platforms.Signed-off-by: Ye.Li
