26 Sep, 2014
1 commit
-
The patch "nand/denali: Adding Denali NAND driver support"
introduced two config symbols without documenting them.Signed-off-by: Scott Wood
Cc: Chin Liang See
Cc: Masahiro Yamada
25 Sep, 2014
2 commits
-
The mentioned binutils port got removed while the patch was
pending. As Ian pointed out there is another port providing
the binutils for arm now. Update the instructions accordingly.Cc: ian@FreeBSD.org
Cc: Tom Rini
Signed-off-by: Jeroen Hofstee -
- implement 'fastboot flash' for eMMC devices
Signed-off-by: Steve Rae
Acked-by: Lukasz Majewski
Reviewed-by: Marek Vasut
18 Sep, 2014
2 commits
16 Sep, 2014
1 commit
-
Commit 70fbc461 removed obsolete PCI5441 and PK1C20 boards.
This commit adds them to README.scrapyard and also fills
some commit IDs and dates for removed boards.Signed-off-by: Masahiro Yamada
Cc: Thomas Chou
Acked-by: Thomas Chou
14 Sep, 2014
1 commit
12 Sep, 2014
1 commit
11 Sep, 2014
4 commits
-
In commit 021e79c85371 ("tools: imximage: Fix the maximum DCD size for
mx53/mx6") we have fixed the maximum DCD size for mx53/mx53.Do the same on the README document for consistency.
Reported-by: Jonas Karlsson
Signed-off-by: Fabio Estevam -
Cc: Albert ARIBAUD
Signed-off-by: Jeroen Hofstee -
Add driver model support so that ns16550 can support operation both with
and without driver model.The driver needs a clock frequency so cannot stand alone unfortunately. The
clock frequency must be provided by a separate driver.Signed-off-by: Simon Glass
-
If the sandbox device tree is provided to U-Boot (with the -d flag) then it
will use the device tree version in preference to the built-in device. The
only difference is the colour.Signed-off-by: Simon Glass
09 Sep, 2014
1 commit
-
For LS102xA, the processor is in little-endian mode, while esdhc IP is
in big-endian mode. CONFIG_SYS_FSL_ESDHC_LE and CONFIG_SYS_FSL_ESDHC_BE
are added. So accessing ESDHC registers can be determined by ESDHC IP's
endian mode.Signed-off-by: Alison Wang
05 Sep, 2014
2 commits
-
On Exynos5420 and newer versions, the FIMD sysmmus are in
"on state" by default.
We have to disable them in order to make FIMD DMA work.
This patch adds the required framework to exynos_fimd driver,
and disables FIMD sysmmu on Exynos5420.Signed-off-by: Ajay Kumar
Signed-off-by: Minkyu Kang -
This config is valid for two devices:
- Odroid X2,
- Odroid U3.Signed-off-by: Przemyslaw Marczak
Cc: Minkyu Kang
Cc: Tom Rini
Signed-off-by: Minkyu Kang
30 Aug, 2014
1 commit
29 Aug, 2014
1 commit
-
Commit 3ff291f371fa9858426774f3732924bacb61ed1c
(kconfig: convert Kconfig helper script into a shell script)
restored "_config" target for backward compatibility.
It should be documented.Signed-off-by: Masahiro Yamada
Reviewed-by: Stephen Warren
25 Aug, 2014
1 commit
-
This patch adds support of NOR cape[1] for both Beaglebone (white) and
Beaglebone(Black) boards. NOR Flash on this cape is connected to GPMC
chip-select[0] and accesses as external memory-mapped device.
This cape has 128Mbits(16MBytes), x16, CFI compatible NOR Flash device.As GPMC chip-select[0] can be shared by multiple capes so NOR profile is
not enabled by default in boards.cfg. Following changes are required to
enable NOR cape detection when building am335x_boneblack board profile.Signed-off-by: Tom Rini
22 Aug, 2014
8 commits
-
It's easier to Cc Simon on patches related to Patman or Buildman.
Signed-off-by: Masahiro Yamada
Cc: Simon Glass -
This board has been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada
-
These boards have been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada
-
This board has been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada
-
This board has been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada
-
This board has been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada
-
Emails to the board maintainer
"Rishi Bhattacharya "
have been bouncing.Tom suggested to remove this board.
Remove also omap1510_udc.c because this is the last board
to enable it.Signed-off-by: Masahiro Yamada
Suggested-by: Tom Rini -
Signed-off-by: Masahiro Yamada
21 Aug, 2014
2 commits
-
Board specific README file should be moved to board folder.
Signed-off-by: York Sun
-
XFI is supported on T4QDS-XFI board, which removed slot3, and four LANEs
of serdes2 are routed to a SFP+ cages, which to house fiber cable or
direct attach cable(copper), the copper cable is used to emulate the
10GBASE-KR scenario.So, for XFI usage, there are two scenarios, one will use fiber cable,
another will use copper cable. For fiber cable, there is NO PHY, while
for copper cable, we need to use internal PHY which exist in Serdes to
do auto-negotiation and link training, which implemented in kernel.
We use hwconfig to define cable type for XFI, and fixup dtb based on the
cable type.For copper cable, set below env in hwconfig:
fsl_10gkr_copper:
the can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2. The
four s do not have to be coexist in hwconfig. For XFI ports,
if a given 10G port will use the copper cable for 10GBASE-KR, set the
of the port in hwconfig, otherwise, fiber cable will be
assumed to be used for the port.For ex. if four XFI ports will both use copper cable, the hwconfig
should contain:fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm2_10g1,fm2_10g2
For fiber cable:
1. give PHY address to a XFI port, otherwise, the XFI ports will not be
available in U-boot, there is no PHY physically for XFI when using fiber
cable, this is just to make U-boot happy and we can use the XFI ports
in U-boot.
2. fixup dtb to use fixed-link in case of fiber cable which has no PHY.
Kernel requests that a MAC must have a PHY or fixed-link.When using XFI protocol, the MAC 9/10 on FM1 should init as 10G interface.
Change serdes 2 protocol 56 to 55 which has same feature as 56 since 56
is not valid any longer.Signed-off-by: Shaohui Xie
Reviewed-by: York Sun
09 Aug, 2014
5 commits
-
- Add 'p1023rds' to the list since commit d0bc5140 dropped
the board support but missed to update this file
- Fill the Commit and Removed Date fields for boards removed
by earlier commits
- Move 'incaip' to keep the list sorted in reverse
chronological order
- Describe the soring rule in the comment block:
"The list should be sorted in reverse chronological order."
- Fix typos in the comment blockSigned-off-by: Masahiro Yamada
-
Add a subsystem entry for dm with myself as maintainer.
Signed-off-by: Simon Glass
-
Add myself as fdt maintainer.
Signed-off-by: Simon Glass
-
The Android fastboot client only communicates with specific vendor IDs.
This addition to the documentation points out that fact so everyone is
aware that not just any vendor ID will work and where to find the IDs
that will.Signed-off-by: Clifton Barnes
Cc: Rob Herring -
Remove the verified boot limitation that only allows a single
RSA public exponent of 65537 (F4). This change allows use with
existing PKI infrastructure and has been tested with HSM-based
PKI.Change the configuration OF tree format to store the RSA public
exponent as a 64 bit integer and implement backward compatibility
for verified boot configuration trees without this extra field.Parameterise vboot_test.sh to test different public exponents.
Mathematics and other hard work by Andrew Bott.
Tested with the following public exponents: 3, 5, 17, 257, 39981,
50457, 65537 and 4294967297.Signed-off-by: Andrew Bott
Signed-off-by: Andrew Wishart
Signed-off-by: Neil Piercy
Signed-off-by: Michael van der Westhuizen
Cc: Simon Glass
06 Aug, 2014
5 commits
-
Messages to afleming@freescale.com now bounce, and should be
directed to my personal address at afleming@gmail.comSigned-off-by: Andy Fleming
-
It's easier to Cc Masahiro on Kconfig-related changes with a git-mailrc
alias.Signed-off-by: Stephen Warren
Acked-by: Masahiro Yamada -
Reflect the latest build system to doc/README.SPL.
Signed-off-by: Masahiro Yamada
-
This document is too old and useless.
Signed-off-by: Masahiro Yamada
-
This parameter should also be supported.
Signed-off-by: Simon Glass
Tested-by: Ajay Kumar
Reviewed-by: Jagannadha Sutradharudu Teki
30 Jul, 2014
1 commit
-
We are about to switch to Kconfig in the next commit.
But there are something to get done beforehand.In Kconfig, include/generated/autoconf.h defines boolean
CONFIG macros as 1.CONFIG_SPL and CONFIG_TPL, if defined, must be set to 1.
Otherwise, when switching to Kconfig, the build log
would be sprinkled with warning messages like this:
warning: "CONFIG_SPL" redefined [enabled by default]Signed-off-by: Masahiro Yamada
Reviewed-by: Simon Glass
28 Jul, 2014
1 commit