10 Apr, 2015
1 commit
-
Remove obsolete email address from MAINTAINERS.
Signed-off-by: Anatolij Gustschin
Cc: Masahiro Yamada
Cc: Tom Rini
06 Apr, 2015
5 commits
-
After this change it is possible to boot trats2 device with Image.itb,
which facilitates automated testing, since only one file is necessary.Signed-off-by: Lukasz Majewski
Signed-off-by: Minkyu Kang -
After this change it is possible to boot trats device with Image.itb,
which facilitates automated testing, since only one file is necessary.Signed-off-by: Lukasz Majewski
Signed-off-by: Minkyu Kang -
This change allows using Image.itb image format with Exynos4 devices
(especially trats and trats2).
Such change facilitates automated testing since only one binary needs
to be prepared.Signed-off-by: Lukasz Majewski
Signed-off-by: Minkyu Kang -
The peach boards have their SDRAM start address at 0x20000000 instead of
0x40000000 which seems common for all other exynos5 based boards. This
means the layout set in exynos5-common.h causes the kernel be loaded
more then 128MB (at 0x42000000) away from memory start which breaks
booting kernels with CONFIG_AUTO_ZRELADDRDefine a custom MEM_LAYOUT_ENV_SETTINGS for both peach boards which uses
the same offsets from start of memory as the common exynos5 settings.This fixes booting via bootz and PXE
Signed-off-by: Sjoerd Simons
Reviewed-by: Simon Glass
Signed-off-by: Minkyu Kang -
We can enable / disable trace feature from the FTRACE config options.
To enable, compile U-Boot with FTRACE=1.This patch add #ifdef FTRACE in exynos5-common.h for enable/disable
to use FTRACE configs instead of having to change board config files.Signed-off-by: Inha Song
Acked-by: Simon Glass
Signed-off-by: Minkyu Kang
03 Apr, 2015
3 commits
-
Conflicts:
board/armltd/vexpress64/vexpress64.cSigned-off-by: Tom Rini
-
Signed-off-by: Alexey Brodkin
Cc: Masahiro Yamada
Cc: Simon Glass
01 Apr, 2015
8 commits
-
Create a new configuration file: at91-sama5_common.h. Which includes the
configurations that reused by all SAMA5 chips.at91-sama5_common.h includes:
- hw macros (clock, text_base and etc.)
- default commands.
- BOOTARGS
- U-Boot common configs.
NOTE: NOR flash definition should be put before including the common header.For sama5d3-xplained:
- add CMD_SETEXPRFor sama5d3xek:
- add CMD_SETEXPR
- change CONFIG_SYS_MALLOC_LEN to (4*1024*1024)Signed-off-by: Josh Wu
-
Enable SPL support for at91sam9n12ek boards, now it supports
boot up from NAND flash, serial flash.Signed-off-by: Bo Shen
-
Enable SPL support for at91sam9x5ek board. Now, it supports
boot up from NAND flash and SPI flash.Signed-off-by: Bo Shen
-
Supports boot up from NAND flash with software ECC eanbled.
And supports boot up from SD/MMC card with FAT file system.As the boot from SD/MMC card with FAT file system, the BSS
segment is too big to fit into SRAM, so, use the lds to put
it into SDRAM.Signed-off-by: Bo Shen
-
Insteading in mmc's raw sectors, this patch will save the environment
in a fat file (uboot.env) in mmc card's first FAT patition by default.If you want to save in mmc's raw sectors, you only need to define
CONFIG_ENV_IS_IN_MMC.Signed-off-by: Josh Wu
Acked-by: Bo Shen -
move MACH_TYPE into defconfig
Signed-off-by: Heiko Schocher
31 Mar, 2015
9 commits
-
This command is only enabled by one board, complicates the NAND code,
and doesn't appear to have been functioning properly for several
years. If there are no bad blocks in the NAND region being written
nand_write_skip_bad() will take the shortcut of calling nand_write()
which bypasses the special yaffs handling. This causes invalid YAFFS
data to be written. See
http://lists.denx.de/pipermail/u-boot/2011-September/102830.html for
an example and a potential workaround.U-Boot still retains the ability to mount and access YAFFS partitions
via CONFIG_YAFFS2.Signed-off-by: Peter Tyser
-
The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some
time and a more generic method of NAND verification now exists in U-Boot.Signed-off-by: Peter Tyser
Tested-by: Heiko Schocher
Acked-by: Heiko Schocher -
Add nand_verify() and nand_verify_page_oob(). nand_verify() verifies
NAND contents against an arbitrarily sized buffer using ECC while
nand_verify_page_oob() verifies a NAND page's contents and OOB.Signed-off-by: Peter Tyser
Tested-by: Heiko Schocher
Acked-by: Heiko Schocher -
The use of the nand_write_options and nand_read_options structures were
removed in commit dfbf617ff055e4216f78d358b0867c548916d14b. Remove the
now-unused structures too.Signed-off-by: Peter Tyser
-
This option was removed along with legacy NAND support in
be33b046b549ad88c204c209508cd7657232ffbd. Clean up some remnants.Signed-off-by: Peter Tyser
-
Bring the Colibri T20 configuration in-line with Apalis/Colibri T30.
Signed-off-by: Marcel Ziswiler
Signed-off-by: Tom Warren -
In accordance with our other modules supported by U-Boot and as agreed
upon for Apalis/Colibri T30 get rid of the carrier board in the board/
configuration/device-tree naming.While at it also bring the prompt more in line with our other products.
Signed-off-by: Marcel Ziswiler
Signed-off-by: Tom Warren -
This CONFIG is not used, so drop it.
Signed-off-by: Simon Glass
Tested-by: Stephen Warren
Acked-by: Stephen Warren
Signed-off-by: Tom Warren
30 Mar, 2015
1 commit
-
This patch enables QUAD read mode for qspi to improve the
read performace while loading the binaries from qspi.Signed-off-by: Ravi Babu
Reviewed-by: Jagannadha Sutradharudu Teki
29 Mar, 2015
8 commits
-
make the CPU clock selectable via Kconfig
this removes the sunxi specific CONFIG_CLK_FULL_SPEED defined in each
soc header and replaces it's use in board/sunxi/board.c with
CONFIG_SYS_CLK_FREQ from Kconfig which allows us to configure board
specific frequency on bootSigned-off-by: Iain Paton
[hdegoede@redhat.com s/CONFIG_SYS_CLK_FREQ/CONFIG_TIMER_CLK_FREQ/ for the
arch-timer clk speed on sun7i to fix mis-compile on sun7i]
Acked-by: Hans de Goede
Signed-off-by: Hans de Goede -
Add CONFIG_SYS_GENERIC_BOARD to amcc-common.h and CONFIG_DISPLAY_BOARDINFO
to Kconfig files. canyonlands.h includes amcc-common.h, so remove
CONFIG_SYS_GENERIC_BOARD definition there.Signed-off-by: Anatolij Gustschin
Cc: Stefan Roese
Cc: Feng Kan
Cc: Masahiro Yamada
Cc: Tom Rini -
Fix eb_cpu5282 and eb_cpu5282_internal unresolved external error.
These boards have video but don't need any ppc related
video_setmem().Fix M53017EVB moving away embedded env to a different offset,
as in M52277EVB.Signed-off-by: Angelo Dureghello
-
This variant that is neither FVP / Base Model or Juno Versatile
Express 64bit is confusing. Get rid of it unless someone can
point out what machine that really is. Seems to be an evolutional
artifact in the config base.Signed-off-by: Linus Walleij
-
This removes the kludgy late board init from the FVP simulator
version of Versatile Express 64bit (ARMv8), and replace it with
a default boot command using the new smhload command to load
the files using semihosting. Tested on the Foundation Model.Signed-off-by: Linus Walleij
-
Reuse the 32-bit ARM client architecture and identify ARMv8 specifically
by setting the BOOTP VCI string.Cc: Dennis Gilmore
Cc: Tom Rini
Signed-off-by: Thierry Reding -
The bootz command doesn't work with Linux kernel images on 64-bit ARM.
The replacement command with the same interface and functionality is
booti.Cc: Dennis Gilmore
Cc: Tom Rini
Signed-off-by: Thierry Reding -
Enable saveenv command and the configs to store environment
persistently in the SD card.Tested on OMAP4 Panda (OMAP4460 ES1.1)
Signed-off-by: Maxin B. John
Acked-by: Lokesh Vutla
28 Mar, 2015
5 commits
-
Move the CPU type config options from include/configs/*.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf547x_8x/config.mk.Signed-off-by: Masahiro Yamada
Cc: Alison Wang
Cc: Angelo Dureghello -
Move the CPU type config options from include/configs/M5235EVB.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf523x/config.mk.Signed-off-by: Masahiro Yamada
Cc: Alison Wang
Cc: Angelo Dureghello -
Move the CPU type config options from include/configs/M52277EVB.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf5227x/config.mk.Signed-off-by: Masahiro Yamada
Cc: Alison Wang
Cc: Angelo Dureghello -
This commit intends to stop grepping CPU type in
arch/m68k/cpu/mcf5445x/config.mk.Move the CPU type config options from include/configs/*.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf5445x/config.mk.Signed-off-by: Masahiro Yamada
Cc: Alison Wang
Cc: Angelo Dureghello -
This commit intends to stop grepping CPU type in
arch/m68k/cpu/mcf532x/config.mk.Move the CPU type config options from include/configs/*.h
to arch/m68k/Kconfig and refactor the CPU flags select in
arch/m68k/cpu/mcf532x/config.mk.Signed-off-by: Masahiro Yamada
Cc: Alison Wang
Cc: Angelo Dureghello
