28 Jun, 2011
2 commits
-
Signed-off-by: Wolfgang Denk
-
Signed-off-by: Wolfgang Denk
25 Jun, 2011
3 commits
-
Looks like this was missed during the conversion to partial linking.
Signed-off-by: Mike Frysinger
-
Convert the PCI base address into a virtual address.
Signed-off-by: Zhao Chenhui
Signed-off-by: Li Yang -
When dealing with non-multipoint devices, if the software root hub code
accepted the message, then we still need to process it normally. So only
return quickly when the root hub skipped the message or is otherwise in
an error state.Signed-off-by: Cliff Cai
Signed-off-by: Mike Frysinger
23 Jun, 2011
22 commits
-
* 'master' of git://git.denx.de/u-boot-arm:
run arm_pci_init after relocation
IXP42x PCI rewrite
update/fix PDNB3 board
update/fix IXDP425 / IXDPG425 boards
add dvlhost (dLAN 200 AV Wireless G) board
IXP NPE: add support for fixed-speed MII ports
update/fix AcTux4 board
update/fix AcTux3 board
update/fix AcTux2 board
update/fix AcTux1 board
use -ffunction-sections / --gc-sections on IXP42x
support CONFIG_SYS_LDSCRIPT on ARM
fix "depend" target in npe directory
Fix IXP code to work after relocation was added
trigger hardware watchdog in IXP42x serial driver
add support for IXP42x Rev. B1 and newer
add XScale sub architecture (IXP/PXA) to maintainer listConflicts:
arch/arm/lib/board.cSigned-off-by: Wolfgang Denk
-
Signed-off-by: Michael Schwingen
-
clean up IXP PCI handling: get rid of IXP-private bus scan, BAR assign etc.
code and use u-boot's PCI infrastructure instead. Move board-specific PCI
setup code (clock/reset) to board directory.Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
- jump to real flash location after reset before turning off flash mirror
- fix timer system to use HZ == 1000, remove broken interrupt-based codeSigned-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
Signed-off-by: Michael Schwingen
-
On Sunday, June 19, 2011 13:55:13 Ilya Yanok wrote:
> On 18.06.2011 23:03, Mike Frysinger wrote:
> >> - tools/Makefile put common/env_embedded.o and envcrc.o to object list
> >>
> >> conditionally. This fixes errors during dependency generation.
> >
> > pretty sure this breaks board builds. if the only thing this fixes is a
>
> I'm sorry but I can't see how this can break the builds. Could you
> please be more specific? I've tried to build some boards, it actually
> works...i might be thinking of a different env_embedded situation. a different
problem with your patch to tools/Makefile: you copied the same logic multiple
times which means more bitrot.why dont you do something like:
> > harmless warning when generating dependency files, then i say ignore it.
> > after all, this is how it has always worked in the past and no one really
> > cared.
>
> Yep, they are harmless but they are not warnings but rather scary errors
> actually. ;) I think it's better to fix them.i guess my threshold for being scared is a bit higher :p
-mike -
mkimage relies on autogenerated version so we need to move
$(VERSION_FILE) rule out of ifeq and make tools rule depend on it to be
able to run 'make tools' from the unconfigured tree.Signed-off-by: Ilya Yanok
Acked-by: Mike Frysinger -
LDSCRIPT is used only from the top-level Makefile and only when the
system is configured so we can move LDSCRIPT and CONFIG_SYS_LDSCRIPT
related logic into the top level Makefile and under configured condition
to avoid errors when building tools from unconfigured tree.Signed-off-by: Ilya Yanok
Acked-by: Mike Frysinger -
The 'trab' board configuration is broken, and there is nobody who is
interested and willing to fix it. Drop it.This includes support for VFD displays which have always been used by
this board only.Signed-off-by: Wolfgang Denk
22 Jun, 2011
13 commits
-
Signed-off-by: Wolfgang Denk
-
Make AFEB9260 build again.
Based on fix for AT91SAM9260EK.Signed-off-by: Sergey Lapin
-
This patch fixes following compile warning:
---88---
Signed-off-by: Andreas Bießmann
-
This patch removes the warning
---88---
Signed-off-by: Andreas Bießmann
-
Signed-off-by: Eric Bénard
-
Signed-off-by: Eric Bénard
-
Signed-off-by: Eric Bénard
-
atmel rework changed define names which broke this file
Signed-off-by: Eric Bénard
-
The rework effort for ATMEL (AT91/AVR32) accidentially broke build of
this driver. Fix this to make it build again. However this driver should
be reworked as soon as possible!Signed-off-by: Reinhard Meyer
-
Fix EMK TOP9000 board to build again:
- changes required due to ATMEL reworkSigned-off-by: Reinhard Meyer
-
Make ATMEL's at91sam9260/9g20/9xe-ek boards build again
Signed-off-by: Reinhard Meyer
-
Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
single board computer modules. Includes NAND flash and Ethernet
support.Signed-off-by: Ryan Mallon
-
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
* Fix: timer.c compile error io.h not found with arm/at91rm9200
* update arm920t/at91 to ATMEL_xxx name scheme
* update arm920t/at91 soc lib
* update at91_emac driverSigned-off-by: Jens Scharsig
Tested-by: Andreas Bießmann
